RBX 250 Series User Guide

Models of the RBX 250 Series

Networks Supported by the RBX 250 Series

Protocols and Features Supported

Indicators on the RBX 250 Series

Reset Button

Configuring the RBX 250 Series

Accessing the RBX 250 Series

Local Access

Remote Access

Preparing for Installation

Verifying the Shipment

Placing the RBX 250 Series on a Table or in a Rack

Placement on a Table

Placement in a Rack

Connecting the Cables

Connecting the RBX 250 Series to a Terminal

Local or Remote Access

Configuring the Terminal

Powering on the RBX 250 Series

Verifying Operation

Errors During the Boot Process

Using EasyStart

Troubleshooting Checklist

Starting Quick Config

Configuring the RBX 250 Series

Configuring Interfaces

Configuring Bridging

Configuring Protocols

Configuring Booting

Configuring Modem Control

Restarting the Router

Before You Begin

Boot Options Available for the RBX 250 Series

Accessing the Boot Options

Boot Option Prompts

B (Boot)

BC (Boot to Config-only Mode)

BM (Boot using console queries)

BN (Boot, but do not run)

BP (Boot using BOOTP)

DIAG (Execute resident extended diagnostic program)

UB (Display Boot Configuration)

UC (Display Hardware Configuration)

UG (Go execute at address in RAM)

LC (Load Configuration Memory)

CC (Clear Configuration Memory)

ZB (ZModem Boot)

ZC (ZModem configuration memory load)

Overview

Fixed Baud Rate

Diagnostic Routines

POST

Menu-driven Diagnostics

Diagnosing Software Problems

Service Aids

Using the Service Aids

Fault Log

Environment

Operating Environment

Clearance

Service Clearance

Service Port

WANs

Disclaimer

EIA 232D/V.24

V.35

V.36

X.21