[Top] [Prev] [Next] [Bottom]

This Guide

. . . explains how to install the hardware and configure the software on your GTX Series router. It also provides helpful information on testing, monitoring, and toubleshooting your router.

This guide is for anyone who installs GTX Series routers. If you are unfamiliar with computer networking, you may need the support of an Internet Service Provider (ISP), an ISDN provider, a Frame Relay provider, or a network administrator.

You should find the following in your GTX Series router's package:

The CD (included with your router) provides extensive information on how to configure and monitor your router using the OpenROUTE command line interface. The documentation is also available on the OpenROUTE Networks Web site at www.openroute.com.

To connect your router to the Internet or to any other wide area network (WAN), you need a WAN cable. This is a separately orderable item that you can purchase from OpenROUTE Networks. For a list of available cables, see Selecting a WAN Cable on page 16.


[Top] [Prev] [Next] [Bottom]

docs@openroute.com
Copyright © 1998, OpenROUTE Networks, Inc. All rights reserved.