Notice
The information in this document is subject to change without notice.
OpenROUTE Networks, Inc. assumes no responsibility for any damages arising from the use or inability to use this document, including but not limited to lost revenue, lost data, claims by third parties, or other damages.
For complete warranty information, please see the product's warranty, which covers both this document and its product.
Copyright Notice
Copyright© OpenROUTE Networks, Inc. 1998. All rights reserved.
No part of this document may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form without the prior written consent of OpenROUTE Networks, Inc.
Software Copyright Notice
Copyright© OpenROUTE Networks, Inc. 1998.
Trademark Notice
OpenROUTE is a registered trademark of OpenROUTE Networks, Inc. All other products or brand names are trademarks or registered trademarks of their respective holders, as marked.
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Safety Information
CAUTION:
For your personal safety, follow these guidelines before installing the GT900 Series router.
Do not remove the unit's cover. The unit is self-contained with no
user-serviceable parts.
Use only indoors. The unit is not intended for any other use.
Disconnect the unit's power supply cord in case of emergency.
Plug the unit's power supply directly into a grounded outlet.
Be sure you have the required power for the unit. The power supply supplied with your unit operates on 90-264 VAC/50-60 Hz.