ELS Messages for RADIUS (RAD)
- Level:
- C-INFO
- Short Syntax:
- RAD.001 Trying to authenticate telnet user userName
( remote_IP_address
), net Network ID
- Long Syntax:
- RAD.001 Trying to authenticate telnet user userName
( remote_IP_address
), net Network ID
- Description:
- A remote telnet session has entered an account at the login prompt
which is not in the router's login account list. RADIUS is enabled,
so the RADIUS server is being queried for authentication to modify
the firewall filters.
- Level:
- C-INFO
- Short Syntax:
- RAD.002 Telnet user userName
( remote_IP_address
) has been authenticated
- Long Syntax:
- RAD.002 Telnet user userName
( remote_IP_address
) has been authenticated
- Description:
- A RADIUS server has responded indicating that the remote telnet
user can modify the router's firewall filters.
- Level:
- C-INFO
- Short Syntax:
- RAD.003 Filter profile profileName,
for user userName,
( ipAddress
) has been activated
- Long Syntax:
- RAD.003 Filter profile profileName,
for user userName,
( ipAddress
) has been activated
- Description:
- The specified filter has been activated.
- Level:
- CE-ERROR
- Short Syntax:
- RAD.004 Req Filt profile profileName,
for user userName,
( ipAddress
) failed to activate
- Long Syntax:
- RAD.004 Requested filter profile profileName,
for user userName,
( ipAddress
) failed to activate
- Description:
- The filter subsystem could not activate requested profile. Typically
this is because the profile does not exist.
- Level:
- CE_ERROR
- Short Syntax:
- RAD.005 Remote user userName,
( ipAddress
) failed RADIUS authentication
- Long Syntax:
- RAD.005 Remote user userName,
( ipAddress
) failed RADIUS authentication
- Description:
- Specified user caused a RADIUS REJECT packet to be generated by the
RADIUS server.
- Level:
- CE_ERROR
- Short Syntax:
- RAD.006 Server ipAddress
timedout
- Long Syntax:
- RAD.006 Server ipAddress
timedout
- Description:
- No repsonse from specified RADIUS server in configued timeout period.
- Level:
- CE_ERROR
- Short Syntax:
- RAD.007 User userName
( ipAddr
) failed RADIUS challenge
- Long Syntax:
- RAD.007 User userName
( ipAddr
) failed RADIUS challenge
- Description:
- The RADIUS server supplied a challenge which the user responded to
incorrectly.
- Level:
- CE_ERROR
- Short Syntax:
- RAD.008 User userName
( ipAddr
) passed RADIUS authentication but has no allowed profiles
- Long Syntax:
- RAD.008 User userName
( ipAddr
) passed RADIUS authentication but has no allowed profiles
- Description:
- The RADIUS server does not have any profiles configured for the
specified user.
- Level:
- CE_ERROR
- Short Syntax:
- RAD.009 Response from RADIUS server ipAddr
failed authentication.
- Long Syntax:
- RAD.009 Response from RADIUS server ipAddr
failed authentication.
- Description:
- The RADIUS server response is either illegal, or the router's and
server's secrets are not the same.
- Level:
- C_INFO
- Short Syntax:
- RAD.010 Sending request to RADIUS server ipAddr
.
- Long Syntax:
- RAD.010 Sending request to RADIUS server ipAddr
.
- Description:
- A request for a remote user's authentication is being sent to
the specified RADIUS server.
- Level:
- C-INFO
- Short Syntax:
- RAD.011 User userName
( remote_IP_address
) authenticated
- Long Syntax:
- RAD.011 User userName
( remote_IP_address
) has been authenticated
- Description:
- A server has responded indicating that the remote
user is to be allowed access through the firewall filters.
The profile(s) specified by the server will be
installed.
- Level:
- CE-ERROR
- Short Syntax:
- RAD.012 Memory allocation failed
- Long Syntax:
- RAD.012 Memory was needed, but none available.
- Description:
- Memory was needed to process a request. Since none was available
the user will receive an Internal Server Error page.
- Level:
- CE-ERROR
- Short Syntax:
- RAD.013 No profile data from server for user message
- Long Syntax:
- RAD.013 Authentication server supplied filter profile names for user message
- Description:
- Despite providing a valid response, the authentication server
failed to provide any data for the user. This could be caused
by a misconfigured server which has a user listed, but no
data programmed for that user.
- Level:
- CE-ERROR
- Short Syntax:
- RAD.014 Prb snd auth req
- Long Syntax:
- RAD.014 Problem sending authentication request
- Description:
- Error encountered sending an authentication request to the
authentication subsystem in the router.
- Level:
- C-INFO
- Short Syntax:
- RAD.015 Telnet User userName
( remote_IP_address
) authorized to login as login_type
- Long Syntax:
- RAD.015 Telnet User userName
( remote_IP_address
) authorized to login as login_type
- Description:
- The RADIUS server has authorized this user to log in to the router