ELS Messages for ISO OSI Connectionless Network Layer (ISO)
- Level:
- UE-ERROR
- Short Syntax:
- ISO.001 rcvd incmplt pkt
- Long Syntax:
- ISO.001 received incomplete packet
- Description:
- A packet fragment recognized as an ISO CLNP data packet was received.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.002 rcvd pkt bad NSAP len (= length
)
- Long Syntax:
- ISO.002 received packet with a bad NSAP length (= length
)
- Description:
- An ISO CLNP data packet was received with an illegal NSAP length.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.003 rcvd pkt bad chksm = pkt_chksum
- Long Syntax:
- ISO.003 received packet with a bad checksum = pkt_chksum
- Description:
- An ISO CLNP data packet was received but had a bad checksum.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.004 rcvd pkt bad vers # = version_number
- Long Syntax:
- ISO.004 received packet with a bad version number (vers = version_number
)
- Description:
- An ISO CLNP data packet was received but had a bad or unsupported
version number.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.005 rcvd pkt bad typ # = type_field
- Long Syntax:
- ISO.005 received packet with a bad type field (vers = type_field
)
- Description:
- An ISO CLNP data packet was received but had a bad or unsupported
type field.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.006 rcvd pkt life exp source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.006 received packet with an expired liftime source_NSAP
-> destination_NSAP
- Description:
- An ISO CLNP data packet was received but had a bad checksum.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.007 rcvd pkt bad opt source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.007 received packet with a bad optional parameter source_NSAP
-> destination_NSAP
- Description:
- An ISO CLNP data packet was received with a bad optional parameter.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.008 rcvd pkt dest unkwn source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.008 received packet - destination unknown source_NSAP
-> destination_NSAP
- Description:
- An ISO CLNP data packet is received but can not be routed
since there is no routing table entry for destination.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.009 rcvd pkt no seg prmit source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.009 received packet-no segmentation permitted source_NSAP
-> destination_NSAP
- Description:
- An ISO CLNP data packet was received which needed segmentation,
but the segmentation permitted flag was not set.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.010 rcvd pkt cnnt fwd source_NSAP
-> destination_NSAP
hndlr err (= error_code
)
- Long Syntax:
- ISO.010 received packet cannot forward, handler error source_NSAP
-> destination_NSAP
(err= error_code
)
- Description:
- An ISO CLNP data packet was received and routed but couldn't be
forwarded because of a handler error.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.011 CLNP input que ovflw source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.011 CLNP input queue overflow source_NSAP
-> destination_NSAP
- Description:
- The ISO CLNP input packet queue has overflowed. Packet is dropped.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.012 no iob avail to snd err pkt
- Long Syntax:
- ISO.012 no i/o buffer available to send error packet
- Description:
- An attempt to send an ISO CLNP error packet failed because of a lack
of system i/o buffers.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.013 no rte to snd err pkt source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.013 no route available to send error packet source_NSAP
-> destination_NSAP
- Description:
- An attempt to send an ISO CLNP error packet failed because it could
not be routed.
- Level:
- P-TRACE
- Short Syntax:
- ISO.014 rcvd pkt source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.014 received packet source_NSAP
-> destination_NSAP
- Description:
- An ISO CLNP data packet was received and passed error checking.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.015 cnnt fwd err pkt hndlr err (= error_code
) source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.015 cannot forward an error packet, handler error (err= error_code
) source_NSAP
-> destination_NSAP
- Description:
- An ISO CLNP error packet coundn't be forwarded because of a
handler error.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.016 ISO ESIS input que ovflw
- Long Syntax:
- ISO.016 ISO ESIS input queue overflow
- Description:
- The ISO ESIS input packet queue has overflowed. Packet is dropped.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.017 OSI unknwn init prot id
- Long Syntax:
- ISO.017 OSI unknown initial protocol identifier
- Description:
- An ISO CLNP packet has been received with an unknown or unsupported
initial protocol identifier.
- Level:
- P-TRACE
- Short Syntax:
- ISO.018 rcvd ERR pkt source_NSAP
-> destination_NSAP
cd= error_code
- Long Syntax:
- ISO.018 received Error packet source_NSAP
-> destination_NSAP
code = error_code
- Description:
- An ISO CLNP Error packet was received for this router.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.019 rcvd DT loc source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.019 received Data Packet Local source_NSAP
-> destination_NSAP
- Description:
- An ISO CLNP Data packet was received with destination NSAP indicating
one of the router's NSAP's.
- Level:
- P-TRACE
- Short Syntax:
- ISO.020 sent ERR pkt destination_NSAP
- Long Syntax:
- ISO.020 sent Error packet destination_NSAP
- Description:
- An ISO CLNP Error packet was sent on receipt of a bad packet.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.021 SRAM err-no NSAP for sbnet
- Long Syntax:
- ISO.021 SRAM error-no NSAP for subnet
- Description:
- A subnet was defined with no NSAP defined for the subnet or domain.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.022 SRAM err-unconcted sbnet
- Long Syntax:
- ISO.022 SRAM error- unconnected subnet
- Description:
- A subnet was defined with no NSAP defined for the subnet or domain.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.023 SRAM err-rte not insrted err= error_code
Rt Destination
- Long Syntax:
- ISO.023 SRAM error- route not intserted error code = error_code
Route to Destination
- Description:
- A statically configured route could not be inserted into routing table.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.024 SRAM err-no adj structs
- Long Syntax:
- ISO.024 SRAM error-no adjacency structures available
- Description:
- Not enough ajacency structures have been configured.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.025 SRAM err-bad ES rte no sub dom = domain
int= interface
- Long Syntax:
- ISO.025 SRAM error-bad static encoded ES route- no subnet domain = domain
int = interface
- Description:
- An encoded end system route was defined for a non-existent subnet.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.026 SRAM err-bad IS rte no adj rt = route
- Long Syntax:
- ISO.026 SRAM error-bad Static IS route no adjacency structure for route route
- Description:
- An encoded end system route was defined for a non-existent subnet.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.027 SRAM err-bad glbl conf
- Long Syntax:
- ISO.027 SRAM error-bad global configuration
- Description:
- The OSI forwarder has been enabled, but either no domains have been
defined, or the number of routes or adjacency is set to 0.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.028 SRAM err-not enough mem
- Long Syntax:
- ISO.028 SRAM error-not enough memory
- Description:
- The OSI forwarder could not get the memory needed to operate.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.029 OSI configured to be disabled
- Long Syntax:
- ISO.029 OSI forwarder is configured to be disabled
- Description:
- The OSI forwarder has not been enabled, either because no global
information has been entered or the forwarder has been explicitly
disabled.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.030 OSI not starting - check config
- Long Syntax:
- ISO.030 OSI forwarder not starting - check configuration
- Description:
- The OSI forwarder is not starting because of the way it's configured.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.031 rcvd echo dest unkwn source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.031 received echo packet - destination unknown source_NSAP
-> destination_NSAP
- Description:
- An ISO CLNP echo packet is received but can not be routed
since there is no routing table entry for destination.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.032 no iob avail to snd echo pkt
- Long Syntax:
- ISO.032 no i/o buffer available to send echo packet
- Description:
- An attempt to send an ISO CLNP echo packet failed because of a lack
of system i/o buffers.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.033 cnnt fwd echo pkt hndlr err (= error_code
) source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.033 cannot send an echo packet, handler error (err= error_code
) source_NSAP
-> destination_NSAP
- Description:
- An ISO CLNP echo packet couldn't be sent because of a
handler error.
- Level:
- P-TRACE
- Short Syntax:
- ISO.034 sent ECHO rply pkt destination_NSAP
- Long Syntax:
- ISO.034 sent ECHO reply packet destination_NSAP
- Description:
- An ISO CLNP ECHO reply packet was sent on receipt of a bad packet.
- Level:
- P-TRACE
- Short Syntax:
- ISO.035 sent ECHO pkt rqst destination_NSAP
- Long Syntax:
- ISO.035 sent ECHO request packet destination_NSAP
- Description:
- An ISO CLNP ECHO request packet was sent on receipt of a bad packet.
- Level:
- P-TRACE
- Short Syntax:
- ISO.036 rcvd ECHO rqst source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.036 received Echo Requet source_NSAP
-> destination_NSAP
- Description:
- An ISO CLNP Echo packet was received.
- Level:
- P-TRACE
- Short Syntax:
- ISO.037 rcvd ECHO rply source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.037 received ECHO reply source_NSAP
-> destination_NSAP
- Description:
- An ISO CLNP ECHO reply was received.
- Level:
- P-TRACE
- Short Syntax:
- ISO.038 DNA pkt forwarded via OSI at level rtg_lvl
- Long Syntax:
- ISO.038 DNA packet forwarded via OSI at level rtg_lvl
- Description:
- A DNA packet was received and then passed to OSI for forwarding.
- Level:
- P-TRACE
- Short Syntax:
- ISO.039 DNA pkt translated to OSI pkt source_NSAP
-> destination_NSAP
- Long Syntax:
- ISO.039 DNA pkt translated to OSI pkt: source_NSAP
-> destination_NSAP
- Description:
- A DNA data packet was successfully translated to an OSI data packet.
- Level:
- P-TRACE
- Short Syntax:
- ISO.040 Translation of DNA pkt to OSI pkt failed
- Long Syntax:
- ISO.040 Translation of DNA pkt to OSI pkt failed
- Description:
- An attempt to translate a DNA data packet to an OSI data packet failed.
- Level:
- P-TRACE
- Short Syntax:
- ISO.041 OSI pkt translated to DNA pkt src
-> dst
- Long Syntax:
- ISO.041 OSI pkt translated to DNA pkt: src
-> dst
- Description:
- An OSI data packet was successfully translated to a DNA data packet.
- Level:
- P-TRACE
- Short Syntax:
- ISO.042 Translation of OSI pkt to DNA pkt failed
- Long Syntax:
- ISO.042 Translation of OSI pkt to DNA pkt failed
- Description:
- An attempt to translate an OSI data packet to a DNA data packet failed.
- Level:
- P-TRACE
- Short Syntax:
- ISO.043 OSI pkt forwarded via DNA at level rtg_lvl
- Long Syntax:
- ISO.043 OSI packet forwarded via DNA at level rtg_lvl
- Description:
- An OSI packet was received and then passed to DNA for forwarding.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.044 Can't send echo message to local router
- Long Syntax:
- ISO.044 Can't send an echo message to the local router.
- Description:
- An attempt was made to send an echo message to the local router. This could occur if a user enters the send command from the console with the local router's NSAP as the destination address.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.045 Error PDU rcvd from src_nsap
on nt network ID
dropped - SP, MS or E/R flag set
- Long Syntax:
- ISO.045 Error PDU received from src_nsap
on network network ID
dropped because either the segmentation permitted, more segments, or error report flag was set
- Description:
- An error report PDU was received with either the segmentation permitted, more segments, or error report flag set. These flags are always supposed to be zero for an error PDU. The error PDU is dropped.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.046 max SVC adj reached on cir ( routing-circuit
)
- Long Syntax:
- ISO.046 maximum SVC adjacencies reached on circuit routing-circuit
- Description:
- The router cannot forward data on a DA circuit because the circuit
already reached maximum allowed adjacencies.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.047 no usable DTEs on cir ( routing-circuit
)
- Long Syntax:
- ISO.047 no usable DTEs on DA ciruit ( routing-circuit
)
- Description:
- Call failures, and all remote DTEs to the DA circuit have timestamps
that are more recent than the Recall timer.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.048 call tmplt not found for cir ( routing-circuit
)
- Long Syntax:
- ISO.048 call template not found for circuit ( routing-circuit
)
- Description:
- Call failure, the router cannot find a Call template for the circuit.
- Level:
- C-TRACE
- Short Syntax:
- ISO.049 rcvd clr on cir ( routing-circuit
)
- Long Syntax:
- ISO.049 received Clear on ciruit ( routing-circuit
)
- Description:
- The router received a Clear Indication on a circuit.
- Level:
- C-TRACE
- Short Syntax:
- ISO.050 recall timeout on cir ( routing-circuit
)
- Long Syntax:
- ISO.050 recall timeout on DA circuit ( routing-circuit
)
- Description:
- The recall timer on the DA circuit expired.
- Level:
- C-TRACE
- Short Syntax:
- ISO.051 rsvr timeout on cir ( routing-circuit
)
- Long Syntax:
- ISO.051 reserve timeout on DA circuit ( routing-circuit
)
- Description:
- The reserve timer on a DA SVC expired.
- Level:
- C-TRACE
- Short Syntax:
- ISO.052 idle timeout on cir ( routing-circuit
)
- Long Syntax:
- ISO.052 idle timeout on DA circuit ( routing-circuit
)
- Description:
- The idle timer on a DA SVC expired.
- Level:
- C-TRACE
- Short Syntax:
- ISO.053 calling on cir ( routing-circuit
)
- Long Syntax:
- ISO.053 calling on circuit ( routing-circuit
)
- Description:
- The router placed a call for the circuit.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.054 max calls on cir ( routing-circuit
)
- Long Syntax:
- ISO.054 maximum call attempts made on circuit ( routing-circuit
)
- Description:
- The router made call failures and maximum call attempts on the circuit.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.055 cnnt reg with WAN ser on intf interface
- Long Syntax:
- ISO.055 cannot register with WAN services on interface interface
- Description:
- The protocol cannot register with WAN services on the interface.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.056 op on non-exist cir ( routing-circuit
)
- Long Syntax:
- ISO.056 attempt to operate on a non-existent circuit ( routing-circuit
)
- Description:
- The router attempted to operate (Enable/Disable) on an unconfigured
circuit.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.057 cnnt get X.121 from NASP
- Long Syntax:
- ISO.057 cannot extract the X.121 address from the NSAP given
- Description:
- The destination NSAP is not in X.121-extractable format.
- Level:
- UE-ERROR
- Short Syntax:
- ISO.058 que ovflw on cir ( routing-circuit
)
- Long Syntax:
- ISO.058 buffer queue overflow on DA circuit ( routing-circuit
)
- Description:
- An ISO CLNP output packet queue overflowed. The forwarder
dropped the packet.