ELS Messages for IPXWAN Version 2

IW.001

Level:
U-TRACE
Short Syntax:
IW.001 ipxCircuitName : chged state to " toState " from " fromState "
Long Syntax:
IW.001 ipxCircuitName : changed state to " toState " from " fromState "
Description:
A transition has occured in the ipxwan state machine resulting from some form of event (packet, timer or calculation).

IW.002

Level:
UI-ERROR
Short Syntax:
IW.002 ipxCircuitName : No wanNodeId in header or extended nodeId option
Long Syntax:
IW.002 ipxCircuitName : No wanNodeId in header or extended nodeId option
Description:
The initial ipxwan timer request did not contain a wanNodeId. Note that wanNodeId is actually a network number, not node number, and is set to the internal network number. If the wanNodeId is in the extended wanNodeId option, then it can be zero.

IW.003

Level:
UI-ERROR
Short Syntax:
IW.003 ipxCircuitName : wanNodeIds are the same
Long Syntax:
IW.003 ipxCircuitName : local and remote wanNodeIds are the same
Description:
Both ends of the ipxwan circuit can not be equal (although one end can be zero).

IW.004

Level:
UI-ERROR
Short Syntax:
IW.004 ipxCircuitName : timer response has incorrect routing options
Long Syntax:
IW.004 ipxCircuitName : timer response has incorrect routing options
Description:
Based on other parameters (such as RIP needing a numbered link) the routing options can not be supported.

IW.005

Level:
UI-ERROR
Short Syntax:
IW.005 ipxCircuitName : timer response has incorrect compression option
Long Syntax:
IW.005 ipxCircuitName : timer response has incorrect compression option
Description:
The only compression option supported is Telebit. In order for it to be active, it must be enabled, and the number of compression slots must be adhered to by the remote end. Also, no Telebit options are supported.

IW.006

Level:
UI-ERROR
Short Syntax:
IW.006 ipxCircuitName : timer response has an unknown option
Long Syntax:
IW.006 ipxCircuitName : timer response has an unknown option
Description:
The remote end responded with an unsupported ipxwan option.

IW.007

Level:
UI-ERROR
Short Syntax:
IW.007 ipxCircuitName : no routing option was selected
Long Syntax:
IW.007 ipxCircuitName : no routing option was selected
Description:
The supplied routing options were not mutually supported by the local and remote hosts.

IW.008

Level:
UI-ERROR
Short Syntax:
IW.008 ipxCircuitName : illegal packet type
Long Syntax:
IW.008 ipxCircuitName : illegal packet type
Description:
Illegal ipxwan packet type. This is a basic protocol error.

IW.009

Level:
UI-ERROR
Short Syntax:
IW.009 ipxCircuitName : option extends beyond max packet length
Long Syntax:
IW.009 ipxCircuitName : option extends beyond max packet length
Description:
Incorrectly generated or corrupted packet. This is a basic protocol error.

IW.010

Level:
UI-ERROR
Short Syntax:
IW.010 ipwan timer req xmit failed, rsn= reason_code , IPX circuit ID pxwan timer request transmit failed, reason=%d, %S
Long Syntax:
IW.010 ipxwan timer request transmit failed, reason= reason_code , IPX circuit ID ïjkøïjkÈïjlHïjkØïjlïjl8ïjkèïjl(ïjl
Description:
A request send an IPXWAN packet failedxx due to the indicated reason. See IPX.108 for detail on failure reason codes.

IW.011

Level:
U-TRACE
Short Syntax:
IW.011 ipxCircuitName : timer request xmitted
Long Syntax:
IW.011 ipxCircuitName : timer request transmitted
Description:
The ipxwan initial negotiation has started. The timer request is sent primarily to determine the master/slave modes of each end of the link. The master is repsonsible for initiating the remainder of the ipxwan negotiations.

IW.012

Level:
UI-ERROR
Short Syntax:
IW.012 ipwan NAK xmit failed, rsn= reason_code , IPX circuit ID pxwan NAK transmit failed, reason=%d, %S
Long Syntax:
IW.012 ipxwan NAK transmit failed, reason= reason_code , IPX circuit ID ïjkøïjkÈïjlHïjkØïjlïjl8ïjkèïjl(ïjl
Description:
A request send an IPXWAN packet failed due to the indicated reason. See IPX.108 for detail on failure reason codes.

IW.013

Level:
U-TRACE
Short Syntax:
IW.013 ipxCircuitName : NAK xmitted
Long Syntax:
IW.013 ipxCircuitName : NAK transmitted
Description:
A negotiation error occurred. The NAK informs the other end to shut down.

IW.014

Level:
UI-ERROR
Short Syntax:
IW.014 ipxCircuitName : Unknown ipxwan option optionNumber
Long Syntax:
IW.014 ipxCircuitName : Unknown ipxwan option optionNumber
Description:
A timer request had an illegal ipxwan option.

IW.015

Level:
UI-ERROR
Short Syntax:
IW.015 ipwan timer respxmit failed, rsn= reason_code , IPX circuit ID pxwan timer response transmit failed, reason=%d, %S
Long Syntax:
IW.015 ipxwan timer response transmit failed, reason= reason_code , IPX circuit ID ïjkøïjkÈïjlHïjkØïjlïjl8ïjkèïjl(ïjl
Description:
A request send an IPXWAN packet failed due to the indicated reason. See IPX.108 for detail on failure reason codes.

IW.016

Level:
U-TRACE
Short Syntax:
IW.016 ipxCircuitName : timer resp xmitted
Long Syntax:
IW.016 ipxCircuitName : timer response transmitted
Description:
Indicates that the node decided to be the slave, and is sending back a response to that effect.

IW.017

Level:
UI-ERROR
Short Syntax:
IW.017 ipwan tput resp xmit failed, rsn= reason_code , IPX circuit ID pxwan nlsp throughput response transmit failed, reason=%d, %S
Long Syntax:
IW.017 ipxwan nlsp throughput response transmit failed, reason= reason_code , IPX circuit ID ïjkøïjkÈïjlHïjkØïjlïjl8ïjkèïjl(ïjl
Description:
A request send an IPXWAN packet failed due to the indicated reason. See IPX.108 for detail on failure reason codes.

IW.018

Level:
U-TRACE
Short Syntax:
IW.018 ipxCircuitName : tput resp xmitted
Long Syntax:
IW.018 ipxCircuitName : nlsp througput response transmitted
Description:
Normal nlsp extended negotiations.

IW.019

Level:
UI-ERROR
Short Syntax:
IW.019 ipwan delay resp xmit failed, rsn= reason_code , IPX circuit ID pxwan nlsp delay response transmit failed, reason=%d, %S
Long Syntax:
IW.019 ipxwan nlsp delay response transmit failed, reason= reason_code , IPX circuit ID ïjkøïjkÈïjlHïjkØïjlïjl8ïjkèïjl(ïjl
Description:
A request send an IPXWAN packet failed due to the indicated reason. See IPX.108 for detail on failure reason codes.

IW.020

Level:
U-TRACE
Short Syntax:
IW.020 ipxCircuitName : delay resp xmitted
Long Syntax:
IW.020 ipxCircuitName : nlsp delay response transmitted
Description:
Normal nlsp extended negotiations.

IW.021

Level:
UI-ERROR
Short Syntax:
IW.021 ipxCircuitName : Client name not same on recon
Long Syntax:
IW.021 ipxCircuitName : Client name is not the same on reconnection
Description:
When a client reconnects it may choose to continue from the previous connection. However, if this is done, the name of client must be the same.

IW.022

Level:
U-TRACE
Short Syntax:
IW.022 ipxCircuitName : Connecting to rem host: remoteIpxCircuitName
Long Syntax:
IW.022 ipxCircuitName : Connecting to remote host: remoteIpxCircuitName
Description:
Informative message indicating the host name at the remote end of the connection.

IW.023

Level:
U-TRACE
Short Syntax:
IW.023 ipxCircuitName : calc nlsp delay calcDelay us, used delay usedDelay us
Long Syntax:
IW.023 ipxCircuitName : calculated nlsp delay calcDelay us, used delay usedDelay us
Description:
NLSP negotiation results.

IW.024

Level:
U-TRACE
Short Syntax:
IW.024 ipxCircuitName : calc tput calcTput b/s, used tput usedTput b/s
Long Syntax:
IW.024 ipxCircuitName : calculated throughput calcTput b/s, used throughput usedTput b/s
Description:
NLSP negotiation results.

IW.025

Level:
UI-ERROR
Short Syntax:
IW.025 ipxCircuitName : Client network not same on recon
Long Syntax:
IW.025 ipxCircuitName : Client network is not the same on reconnection
Description:
Similar to IW_21. On reconnect, the network number must be the same too.

IW.026

Level:
UI-ERROR
Short Syntax:
IW.026 ipxCircuitName : Client node num not same on recon
Long Syntax:
IW.026 ipxCircuitName : Client node number is not the same on reconnection
Description:
Similar to IW_21.

IW.027

Level:
UI-ERROR
Short Syntax:
IW.027 ipwan info resp xmit failed, rsn= reason_code , IPX circuit ID pxwan info response transmit failed, reason=%d, %S
Long Syntax:
IW.027 ipxwan info response transmit failed, reason= reason_code , IPX circuit ID ïjkøïjkÈïjlHïjkØïjlïjl8ïjkèïjl(ïjl
Description:
A request send an IPXWAN packet failed due to the indicated reason. See IPX.108 for detail on failure reason codes.

IW.028

Level:
U-TRACE
Short Syntax:
IW.028 ipxCircuitName : info resp xmitted
Long Syntax:
IW.028 ipxCircuitName : info response transmitted
Description:
Last packet sent in ipxwan negotation.

IW.029

Level:
UI-ERROR
Short Syntax:
IW.029 ipwan info req xmit failed, rsn= reason_code , IPX circuit ID pxwan info request transmit failed, reason=%d, %S
Long Syntax:
IW.029 ipxwan info request transmit failed, reason= reason_code , IPX circuit ID ïjkøïjkÈïjlHïjkØïjlïjl8ïjkèïjl(ïjl
Description:
A request send an IPXWAN packet failed due to the indicated reason. See IPX.108 for detail on failure reason codes.

IW.030

Level:
U-TRACE
Short Syntax:
IW.030 ipxCircuitName : info req xmitted
Long Syntax:
IW.030 ipxCircuitName : info request transmitted
Description:
Part of normal ipxwan negotiation.

IW.031

Level:
UI-ERROR
Short Syntax:
IW.031 ipwan tput req xmit failed, rsn= reason_code , IPX circuit ID pxwan nlsp throughput request transmit failed, reason=%d, %S
Long Syntax:
IW.031 ipxwan nlsp throughput request transmit failed, reason= reason_code , IPX circuit ID ïjkøïjkÈïjlHïjkØïjlïjl8ïjkèïjl(ïjl
Description:
A request send an IPXWAN packet failed due to the indicated reason. See IPX.108 for detail on failure reason codes.

IW.032

Level:
U-TRACE
Short Syntax:
IW.032 ipxCircuitName : tput req xmitted
Long Syntax:
IW.032 ipxCircuitName : nlsp throughput request transmitted
Description:
Part of normal nlsp negotiation.

IW.033

Level:
UI-ERROR
Short Syntax:
IW.033 ipwan delay req xmit failed, rsn= reason_code , IPX circuit ID pxwan nlsp delay request transmit failed, reason=%d, %S
Long Syntax:
IW.033 ipxwan nlsp delay request transmit failed, reason= reason_code , IPX circuit ID ïjkøïjkÈïjlHïjkØïjlïjl8ïjkèïjl(ïjl
Description:
A request send an IPXWAN packet failed due to the indicated reason. See IPX.108 for detail on failure reason codes.

IW.034

Level:
U-TRACE
Short Syntax:
IW.034 ipxCircuitName : delay req xmitted
Long Syntax:
IW.034 ipxCircuitName : nlsp delay request transmitted
Description:
Part of normal nlsp negotiation.

IW.035

Level:
UI-ERROR
Short Syntax:
IW.035 ipxCircuitName : tput is zero
Long Syntax:
IW.035 ipxCircuitName : nlsp measured throuput is zero
Description:
Throughput data option may may not be present in throughput response.

IW.036

Level:
UI-ERROR
Short Syntax:
IW.036 ipxCircuitName : rcvd rip routing req for unum link
Long Syntax:
IW.036 ipxCircuitName : received rip routing option for unumbered link
Description:
RIP requires numbered links (master).

IW.037

Level:
UI-ERROR
Short Syntax:
IW.037 ipxCircuitName : slave rcvd rip routing req for unum link
Long Syntax:
IW.037 ipxCircuitName : slave received rip routing option for unumbered link
Description:
RIP requires numbered links (slave).

IW.038

Level:
U-TRACE
Short Syntax:
IW.038 ipxCircuitName : init to DOWN state
Long Syntax:
IW.038 ipxCircuitName : initializing to DOWN state
Description:
General information.

IW.039

Level:
U-TRACE
Short Syntax:
IW.039 ipxCircuitName : exec exit func ( stateName )
Long Syntax:
IW.039 ipxCircuitName : Execute state exit function for state " stateName "
Description:
Part of ipxwan state machine operation. Indicates that a state is exiting and its exit function is being called.

IW.040

Level:
U-TRACE
Short Syntax:
IW.040 ipxCircuitName : exec entry func ( stateName )
Long Syntax:
IW.040 ipxCircuitName : Execute state entry function for state " stateName "
Description:
Part of ipxwan state machine operation. Indicates that a state is being entered and its entry function is being called.

IW.041

Level:
UI-ERROR
Short Syntax:
IW.041 ipxCircuitName : MTU too small; needs to be > 576 bytes
Long Syntax:
IW.041 ipxCircuitName : MTU too small; needs to be greater than 576 bytes
Description:
IPXWAN specification requires min MTU of 576.

IW.042

Level:
U-TRACE
Short Syntax:
IW.042 ipxCircuitName : recv'd event " eventName "
Long Syntax:
IW.042 ipxCircuitName : received event " eventName "
Description:
Part of ipxwan state machine operation. Indicates that an event was received.

IW.043

Level:
UI-ERROR
Short Syntax:
IW.043 ipxCircuitName : reg by circ name fail
Long Syntax:
IW.043 ipxCircuitName : registration by circuit name failed
Description:
Registration of the individual circuit by IPXWAN with the datalink handler failed. The IPX circuit can not be initialized. The circuit name is the the key value used in registration.
Cause:
On a Frame Relay network, the circuit name does not match a defined circuit name under the Frame Relay configuration for the interface.
Cause:
On an IPPN, or IP-Relay, network, the circuit name does not match a defined hostname defined under IP configuration.

IW.044

Level:
UI-ERROR
Short Syntax:
IW.044 ipxCircuitName : remote info message is missing RIP/SAP opt
Long Syntax:
IW.044 ipxCircuitName : remote info message is missing RIP/SAP option
Description:
IPXWAN negotiation failed. Information message from remote router is missing RIP/SAP option.

IW.045

Level:
UI-ERROR
Short Syntax:
IW.045 ipxCircuitName : rcvd bad RIP/SAP option, expected bytes_expected got bytes_received
Long Syntax:
IW.045 ipxCircuitName : received bad RIP/SAP option, expected bytes_expected got bytes_received bytes
Description:
IPXWAN negotiation failed. Received an information message which contained a RIP/SAP option in which the size was not expected.

IW.046

Level:
UI-ERROR
Short Syntax:
IW.046 ipxCircuitName : error, remote router has same router name
Long Syntax:
IW.046 ipxCircuitName : error, remote router has same router name
Description:
IPXWAN negotiation failed during exchange of Information messages. Remote router has the same router name as the local router. Configuring the router with a name is not mandatory, but if one is configured, the router names at either end of the connection should not be the same.

IW.047

Level:
UI-ERROR
Short Syntax:
IW.047 ipxCircuitName : remote info msg is missing NLSP option
Long Syntax:
IW.047 ipxCircuitName : remote information message is missing NLSP option
Description:
IPXWAN negotiation failed. The information message from the remote router is missing the NLSP information. Because NLSP is the negotiated routing protocol, NLSP is a mandatory option in the information message.

IW.048

Level:
UI-ERROR
Short Syntax:
IW.048 ipxCircuitName : rcvd bad NLSP option, expected bytes_expected got bytes_received
Long Syntax:
IW.048 ipxCircuitName : received bad NLSP option, expected bytes_expected got bytes_received bytes
Description:
IPXWAN negotiation failed. Received an information message which contained a NLSP option in which the size was not expected.

IW.049

Level:
UI-ERROR
Short Syntax:
IW.049 ipxCircuitName : remote info msg is missing NODE NUMBER option
Long Syntax:
IW.049 ipxCircuitName : remote information msg is missing NODE NUMBER option
Description:
IPXWAN negotiation failed. Information message from the remote router is missing the NODE NUMBER option. Because Client-Router is the negotiated routing protocol, NODE NUMBER is a mandatory option in the Information message.

IW.050

Level:
UI-ERROR
Short Syntax:
IW.050 ipxCircuitName : rcvd bad NODE NUMBER option, expected bytes_expected got bytes_received
Long Syntax:
IW.050 ipxCircuitName : received bad NODE NUMBER option, expected bytes_expected got bytes_received bytes
Description:
IPXWAN negotiation failed. Received an information message which contained a NODE NUMBER option in which the size was not expected.

IW.051

Level:
U-TRACE
Short Syntax:
IW.051 ipxCircuitName : Event not supported in state=" currState ", event= event
Long Syntax:
IW.051 ipxCircuitName : Event not supported in current state=" currState ", event= event
Description:
Event received is not supported in the current state.

IW.052

Level:
U-TRACE
Short Syntax:
IW.052 ipxCircuitName : expctd rspnse timed out, retry ( timestried )
Long Syntax:
IW.052 ipxCircuitName : expected response timed out, retry again ( timestried )
Description:
Response expected for the current state has timed out. FSM will resend message in hopes that a response will be sent from the remote router.

IW.053

Level:
U-TRACE
Short Syntax:
IW.053 ipxCircuitName : retries maxed out, tried= timestried
Long Syntax:
IW.053 ipxCircuitName : retries maxed out, tried= timestried
Description:
IPXWAN fsm gave up trying to expect a response from the remote router. The maximum defined attempts for the current state has been exceeded.

IW.054

Level:
UI-ERROR
Short Syntax:
IW.054 IPX registration to X.25 intf = netnum failed
Long Syntax:
IW.054 IPX registration to X.25 intf = netnum failed
Description:
IPX registration to X.25 for the specified interface failed.

IW.055

Level:
U-TRACE
Short Syntax:
IW.055 IPX registration to X.25 intf = netnum succeeded
Long Syntax:
IW.055 IPX registration to X.25 intf = netnum succeeded
Description:
IPX registration to X.25 for the specified interface succeeded.

IW.056

Level:
U-TRACE
Short Syntax:
IW.056 ipxCircuitName : outcall sent to dte= rmtdteaddr
Long Syntax:
IW.056 ipxCircuitName : outcall sent to dte= rmtdteaddr
Description:
Call Request has been sent to remote DTE.

IW.057

Level:
UI-ERROR
Short Syntax:
IW.057 ipxCircuitName : outcall send failed, error= x25retval
Long Syntax:
IW.057 ipxCircuitName : outcall send failed, error= x25retval
Description:
Call Request send failed, due to the indicated error.

IW.058

Level:
U-TRACE
Short Syntax:
IW.058 ipxCircuitName : x.25 PVC cnnctn est. Begin IPXWAN negog
Long Syntax:
IW.058 ipxCircuitName : x.25 PVC connection binded. Begin IPXWAN negotiation
Description:
x.25 PVC has bounded to the indicated IPXWAN circuit IPXWAN negotiation begins.

IW.059

Level:
UI-ERROR
Short Syntax:
IW.059 ipxCircuitName : x.25 PVC bind failed
Long Syntax:
IW.059 ipxCircuitName : x.25 PVC failed to bind IPXWAN circuit
Description:
x.25 PVC failed to bind to the indicated IPXWAN circuit.

IW.060

Level:
U-TRACE
Short Syntax:
IW.060 ipxCircuitName : x.25 call request has timed out
Long Syntax:
IW.060 ipxCircuitName : x.25 call request has timed out
Description:
x.25 call request has timed out

IW.061

Level:
U-TRACE
Short Syntax:
IW.061 x.25 call indication received on intf= netnum
Long Syntax:
IW.061 x.25 call indication received on interface= netnum
Description:
x.25 call indication received on specified interface.

IW.062

Level:
UI-ERROR
Short Syntax:
IW.062 call rqst from dteaddr has non-IPX CUD, intf= interface_number
Long Syntax:
IW.062 call request from dteaddr has non-IPX CUD, interface= interface_number
Description:
The call user data received was not the required IPX value of 0x800000008137. The call request is cleared.

IW.063

Level:
U-TRACE
Short Syntax:
IW.063 ipxCircuitName : accepted x.25 call request
Long Syntax:
IW.063 ipxCircuitName : accepted x.25 call request
Description:
The specified IPXWAN circuit has accepted the x.25 call request. IPXWAN negotiation may proceed on this circuit.

IW.064

Level:
UI-ERROR
Short Syntax:
IW.064 no DTE match for call rqst from dteaddr , intf= interface_number
Long Syntax:
IW.064 no DTE match for call request from dteaddr , interface= interface_number
Description:
There was no matching IPXWAN X.25 circuit defined for the calling DTE. The call request is cleared.

IW.065

Level:
U-TRACE
Short Syntax:
IW.065 ipxCircuitName : ipxwan FSM jump start trace
Long Syntax:
IW.065 ipxCircuitName : ipxwan FSM jump start trace
Description:
IPXWAN FSM has been jumpstart for the specified IPXWAN circuit. IPXWAN negotiation will begin.

IW.066

Level:
UI-ERROR
Short Syntax:
IW.066 ipxCircuitName, : circuit in wrong state ( currState ) for jump start
Long Syntax:
IW.066 ipxCircuitName, : circuit in wrong state ( currState ) for jump start
Description:
IPXWAN circuit to be jumpstart is in the wrong VC state.

IW.067

Level:
UI-ERROR
Short Syntax:
IW.067 ipxCircuitName : Call Request failed, will try again
Long Syntax:
IW.067 ipxCircuitName : Call Request failed, will try again
Description:
Call request for the specified IPXWAN circuit has failed. The remote router has cleared our request. Try sending another call request.

IW.068

Level:
U-TRACE
Short Syntax:
IW.068 ipxCircuitName : Clear Indication rcvd on ACTIVE circuit
Long Syntax:
IW.068 ipxCircuitName : Clear Indication received on ACTIVE circuit
Description:
Clear Indication has been received on an ACTIVE circuit. The remote router has terminated the connection on the circuit. Locally the router will cleanup the circuit and either attempt to reestablish the connection if the circuit is configured as an OUT-SVC or wait for the incoming call request if it is configured as an IN-SVC.

IW.069

Level:
U-TRACE
Short Syntax:
IW.069 ipxCircuitName, : Clear Indication rcvd. unexp ckt state = cirState
Long Syntax:
IW.069 ipxCircuitName, : Clear Indication received. Unexp circuit state= cirState
Description:
Clear Indication received for an IPXWAN circuit that is in an unexpected state.

IW.070

Level:
U-TRACE
Short Syntax:
IW.070 ipxCircuitName : x.25 call complete indctin rcvd
Long Syntax:
IW.070 ipxCircuitName : x.25 call complete indicator received
Description:
X.25 call complete notification received for specified IPXWAN circuit.

IW.071

Level:
U-TRACE
Short Syntax:
IW.071 ipxCircuitName : PVC up indctin rcvd
Long Syntax:
IW.071 ipxCircuitName : PVC up indicator received
Description:
X.25 PVC up indicator received for specified IPXWAN circuit.