ELS Messages for End System Intermediate-System Protocol (ESIS)
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.001 ESIS input que ovflw
- Long Syntax:
- ESIS.001 ESIS input queue overflow
- Description:
- The ESIS task input queue has overflowed, packet is dropped.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.002 rcvd incmplt pkt
- Long Syntax:
- ESIS.002 received incomplete packet
- Description:
- A packet fragment recognized as an ESIS packet was received.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.003 rcvd pkt bad chksm= pkt_chksum
- Long Syntax:
- ESIS.003 received packet with a bad checksum = pkt_chksum
- Description:
- An ESIS packet was received but had a bad checksum.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.004 rcvd pkt bad vers # = version_number
- Long Syntax:
- ESIS.004 received packet with a bad version number (vers = version_number
)
- Description:
- An ESIS packet was received but had a bad or unsupported
version number.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.005 rcvd pkt bad typ # = type_field
- Long Syntax:
- ESIS.005 received packet with a bad type field (vers = type_field
)
- Description:
- An ESIS packet was received but had a bad or unsupported
type field.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.006 no iob avail to snd hello
- Long Syntax:
- ESIS.006 no i/o buffer available to send hello
- Description:
- An attempt to send an ESIS hello failed because of a lack
of system i/o buffers.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.007 cnnt snt hello pkt hndlr err
- Long Syntax:
- ESIS.007 cannot send a hello packet, handler error
- Description:
- An ESIS hello packet coundn't be sent because of a
handler error.
- Level:
- P-TRACE
- Short Syntax:
- ESIS.008 sent hello source_NSAP
on int interface_#
- Long Syntax:
- ESIS.008 sent hello packet with source nsap source_NSAP
on int interface_#
- Description:
- An ESIS hello packet was sent out on an interface.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.009 rcvd hello packet with a bad header
- Long Syntax:
- ESIS.009 rcvd hello packet with a bad header
- Description:
- Received hello packet with a holding time or reserved field.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.010 rcvd hello bad nsap source_NSAP
- Long Syntax:
- ESIS.010 received hello with bad nsap source_NSAP
- Description:
- An ESIS hello packet was received with a bad nsap or one that overran
the packet.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.011 rcvd hello pkt bad opt
- Long Syntax:
- ESIS.011 received packet with a bad optional parameter
- Description:
- An ESIS CLNP data packet was received with bad option parameter(s).
- Level:
- P-TRACE
- Short Syntax:
- ESIS.012 rcvd hello from source_NSAP
int interface
net network_name
- Long Syntax:
- ESIS.012 rcvd hello packet with source nsap source_NSAP
on int interface
, net network_name
- Description:
- An ESIS hello packet was received on the specified interface.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.013 rcvd hello unsp dom src source_NSAP
- Long Syntax:
- ESIS.013 rcvd hello packet unsupported domain source_NSAP
- Description:
- An ESIS hello packet was received with an unrecognized IDI.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.014 no rsrc to instl rt
- Long Syntax:
- ESIS.014 no resources to install route
- Description:
- An ESIS hello packet was received but there were no resources available
to install the route.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.015 rcvd hello ng cnfltng rt source_NSAP
- Long Syntax:
- ESIS.015 received hello no good conflicting route source_NSAP
- Description:
- An ESIS hello packet was received but could not be entered into the
database since there was a static or dynamic route already defined
that conflicted with the route in the hello.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.016 tmd out rte reac source_NSAP
- Long Syntax:
- ESIS.016 timed out route reactivated source_NSAP
- Description:
- An ESIS hello packet was received with a route that had been previously
timed out.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.017 no rsrc to snd rdrct
- Long Syntax:
- ESIS.017 no resources to send redirect
- Description:
- An ESIS redirect packet could not be sent due to a lack of resources.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.018 rdrct nt snt hndlr err
- Long Syntax:
- ESIS.018 redirect not sent, handler error
- Description:
- An ESIS redirect packet could not be sent due to a handler error.
- Level:
- P-TRACE
- Short Syntax:
- ESIS.019 sent rdrct to: dest_NSAP
- Long Syntax:
- ESIS.019 sent redirect packet to: dest_NSAP
- Description:
- An ESIS redirect packet was sent out on an interface.
- Level:
- UE-ERROR
- Short Syntax:
- ESIS.020 tmd out rte source_NSAP
- Long Syntax:
- ESIS.020 timed out route source_NSAP
- Description:
- An ESIS hello route has been timed out.
- Level:
- UI_ERROR
- Short Syntax:
- ESIS.021 Unable to allocate resources for a new ES adjacency
- Long Syntax:
- ESIS.021 Unable to allocate resources for a new ES adjacency
- Description:
- We were unable to get an adjacency structure for a new end system
adjacency.
- Level:
- UE_ERROR
- Short Syntax:
- ESIS.022 hello PDU dropped, rcvd over p-to-p cir cct_num
- Long Syntax:
- ESIS.022 hello PDU dropped, received over point-to-point circ cct_num
- Description:
- An ESIS hello PDU was received over a point-to-point circuit - the packet was dropped because ESIS does not run over point-to-point circuits.
- Level:
- UE_ERROR
- Short Syntax:
- ESIS.023 hello PDU dropped, no matching area address
- Long Syntax:
- ESIS.023 ESIS hello PDU dropped, no matching area address
- Description:
- An ESIS hello PDU was dropped because the area address portion of its source NSAP didn't match one of the router's manual area addresses.
- Level:
- P-TRACE
- Short Syntax:
- ESIS.024 dropped hello from source_NSAP
int interface
net network_name
manual ES adjacency exists
- Long Syntax:
- ESIS.024 dropped hello packet with source nsap source_NSAP
on int interface
, net network_name
- manual ES adjacency exists
- Description:
- An ESIS hello packet was dropped on the specified interface because a manual adjacency exists for the ES.