[Top] [Prev] [Next] [Bottom]

Using the IPX Protocol 15

Implementation of IPX
Broadcast and IPX WAN Circuits
IPX WAN
NLSP
Configuring IPX
Configuring NLSP
Performing Optional Configuration Tasks
IPX Filtering
IPX Commands
Add [C]
Access-controls [M]
Clear-config [C]
Clear-counters [M]
Delete [C] [M]
Disable [C] [M]
Dump [M]
Enable [C] [M]
Filter-lists [C] [M]
Frame [C]
Ipxwan [M]
Keepalive [M]
List [C] [M]
Move [C]
Nlsp [C]
Nlsp-list [M]
Ping [M]
Route [M]
SAP-filters [M]
Set [C]
Shutdown [M]
Slist [M]
NLSP Configuration Commands
Add [C]
Delete [C]
Disable [C]
Enable [C]
List [C]
Set [C]

Using IPX Circuit Filters 121

How Filters Work

 
Displaying the IPX Filtering Prompts
Configuring Filters
IPX Filter Commands
Attach [C]
Cache [M]
Clear [M]
Create [C]
Default [C]
Delete [C]
Detach [C]
Disable [C] [M]
Enable [C] [M]
List [C] [M]
Move [C]
Set-Cache [C]
Update [C]
Exit [C] [M]
Update Commands
Add [C]
Delete [C]
List [C]
Move [C]
Set-Action [C]
Exit [C]
 

Using the AppleTalk Protocol 143

 

AppleTalk Overview
The AppleTalk Protocol Stack
Features Supported
Configuration Procedures
AppleTalk Commands
Add [C]
Cache [M]
Clear-Counters [M]
Counters [M]
Delete [C]
Disable [C]
Dump [M]
Enable [C]
Exit [C] [M]
Interface [M]
List [C]
Set [C]

Using the ARP and Inverse ARP Protocols 173

ARP Overview
Inverse ARP Overview
ARP Commands
Add Entry [C]
Change Entry [C]
Clear [C]
Delete Entry [C]
Disable Auto-Refresh [C]
Dump [M]
Enable Auto-Refresh [C]
Exit [C] [M]
Hardware [M]
List [C]
Protocol [M]
Set [C]
Statistics [M]

Using the BGP4 Protocol 185

Border Group Protocol Overview
How BGP Works
Setting Up BGP
Sample Policy Definitions
BGP Commands
Add [C]
Change [C]
Delete [C]
Destinations [M]
Disable [C]
Enable [C]
Exit [C] [M]
List [C]
Move [C]
Neighbors [M]
Paths [M]
Sizes [M]

Using DHCP 221

DHCP Overview
Configuring DHCP Client
DHCP Client Commands
Clear [M]
Exit [M]
Interface [M]
Release [M]
Statistics [M]
Configuring DHCP Server
DHCP Server Commands
Add [C] [M]
Clear-All [C]
Delete [C] [M]
Disable [C] [M]
Enable [C] [M]
Exit [C] [M]
Free [C] [M]
List [C] [M]
Revert [M]
Save [M]
Set [C] [M]

Using DNS 241

DNS Overview
Displaying the DNS Client Prompts
Configuring DNS
DNS Commands
Disable [C] [M]
Enable [C] [M]
Exit [C] [M]
List [C] [M]
Revert [M]
Save [M]
Set [C] [M]

Using the DVMRP Protocol 247

 

Introduction
DVMRP/MOSPF Interaction
Running DVMRP over MOSPF
Tunnels to Internal MOSPF/OSPF Destinations
Supported and Unsupported DVMRP Features
Displaying the DVMRP Prompts
DVMRP Commands
Dump Routing Tables [C]
DVMRP [C]
Exit [C] [M]
IGMP [C] [M]
Interface Summary [M]
List [M]
Mcache [M]
MOSPF [C]
Mstat [M]
Phyint [C]
Tunnel [C]

Using IGMP 263

 

Introducing IGMP
Displaying the IGMP Prompts
Configuring IGMP
IGMP Commands
Clear-Config [C]
Clear-Counters [M]
Disable IGMP [C] [M]
Disable Standalone-IGMP [C] [M]
Enable IGMP [C] [M]
Enable Standalone-IGMP [C] [M]
Join Interface [C] [M]
Join Router-Internal [C] [M]
Leave Interface [C] [M]
Leave Router-Internal [C] [M]
List [C] [M]
Mgroups [M]
Restore [M]
Save [M]
Set [C] [M]

Using IP Filters 283
 
Introducing IP Filters
Entering IP Filtering Commands
Configuring IP Filters
IP Filter Commands
Add Filter [C] [M]
Add Profile [C] [M]
Delete Filter [C] [M]
Delete Profile [C] [M]
List Attached [C] [M]
List Filter [C] [M]
List Interface [C] [M]
List Profile [C] [M]
Rename Filter [C] [M]
Rename Profile [C] [M]
Revert [M]
Save [M]
Scope [C] [M]
Set Filter [C] [M]
Set Interface [C] [M]
Unscope [C] [M]
Exit [C] [M]

Using IP 309
Internet Protocol Overview
Configuring IP
Other Configuration Tasks
IP Commands
Add [C]
Cache [M]
Change [C]
Counters [C]
Delete [C]
DHC [M]
DHS [C] [M]
Disable [C]
DNS [C] [M]
Dump Routing Tables [M]
Enable [C]
Exit [C] [M]
Filters [C] [M]
Ftp [C] [M]
Hostnames [M]
IGMP [C]
IPSec [C]
List [C]
NAT [C] [M]
Ping [M]
PolicyRt [C] [M]
RIP [C] [M]
Route [M]
Set [C]
Sizes [M]
Static Routes [M]
Traceroute [M]
UDP-Forward [M]

Using IP Network Address Translation (NAT) 379

 

NAT Overview
How NAT Works
Sample NAT Configuration
Using Fixed IP Address Mappings
Translating Port Numbers
Displaying NAT Prompts
Configuring NAT
NAT Commands
Add [C] [M]
Clear [C] [M]
Delete [C] [M]
Disable NAT [C] [M]
Enable NAT [C] [M]
Exit [C] [M]
List [C] [M]
Restore [M]
Save [M]
Set [C] [M]
Zero [M]

Using the OSPF Protocol 415

 

Introducing OSPF
Configuring OSPF
OSPF Commands
Add [C]
Advertisement [M]
Area [M]
AS-external [M]
Database [M]
Delete [C]
Disable [C]
Dump [M]
Enable [C]
Exit [C] [M]
IGMP [C] [M]
Interface [M]
List [C]
Mcache [M]
Mstats [M]
Neighbor [M]
Ping [M]
Routers [M]
Set [C]
Size [M]
Statistics [M]
Traceroute [M]
Weight [M]

Using Policy Routing 479
Policy Routing Overview
Policy Routing Strategies and Applications
Configuring Policy Routing
Testing Policy Routing Configuration
Removing All Policy Routing Configuration
Entering Policy Routing Commands
Policy Routing Commands
Add Policy [C] [M]
Add Profile [C] [M]
Delete [C] [M]
Exit [C] [M]
List [C] [M]
Set Interface [C] [M]
Set Policy [C] [M]
Set Profile [C] [M]
Show [M]

Using RIPv1, RIPv2, and Triggered RIP 499

 

Interior Gateway Protocols
The Routing Information Protocol (RIP)
Triggered RIP
Displaying RIP Prompts
Configuring RIP
RIP Commands
Add [C]
Clear [C] [M]
Delete [C]
Disable [C]
Dump [M]
Enable [C]
Interface [M]
List [C]
Neighbor [M]
Ping [M]
Route [M]
Set [C]
Statistics [M]
Traceroute [M]

Using the SNMP Protocol 533

 

SNMP Overview
Displaying the SNMP Prompts
SNMP Commands
Add [C]
Delete [C]
Disable [C]
Enable [C]
Exit [C] [M]
List [C] [M]
Set [C]
Statistics [M]

[Top] [Prev] [Next] [Bottom]

Copyright © 2001, Nx Networks, Inc. All rights reserved.