ELS Messages for xtptrp.msg

XTP.001

Level:
P-TRACE
Class:
FAKE
Short Syntax:
XTP.001 discarded pkt, nt network ID no XTP forwarder
Long Syntax:
XTP.001 Discarded packet net network ID , no XTP forwarder
Description:
The fake XTP forwarder generates this message for each packet it receives.
Cause:
The router received a packet for XTP but the XTP forwarder is not installed.

XTP.002

Level:
U-INFO
Short Syntax:
XTP.002 q overflow, nt network ID
Long Syntax:
XTP.002 Queue overflow on packet from net network ID
Description:
There is an input queue overflow causing the forwarder to discard the packet.
Cause:
Input queue overflows happen when a packet is received from an interface that is short on buffers and the length of the XTP queue is greater than the fair share. The cause may be either a burst or steady state of traffic arriving faster than the XTP forwarder can forward it.
Action:
Reduce traffic bursts. Upgrade to a faster router.

XTP.003

Level:
UI-ERROR
Short Syntax:
XTP.003 invalid ckt id recvd
Long Syntax:
XTP.003 The circuit id received in the iob is NULL
Description:
The circuit id received in the iob is NULL .
Cause:
The XTP forwarder is not installed.

XTP.004

Level:
UI-ERROR
Short Syntax:
XTP.004 tcp xfer for data from x25 ckt failed
Long Syntax:
XTP.004 Data recevied on X.25 ckt could not be sent over TCP
Description:
Data received on the X.25 circuit could not be sent over TCP.

XTP.005

Level:
UI-ERROR
Short Syntax:
XTP.005 invalid tcp mesg type recvd
Long Syntax:
XTP.005 Undefined message received on TCP
Description:
The TCP message received is not among the ones defined.

XTP.006

Level:
U-INFO
Short Syntax:
XTP.006 called dte dteaddr, in call req from peer ipaddr not configured
Long Syntax:
XTP.006 Called DTE dteaddr, in CALL REQUEST from peer ipaddr is not configured on any interface.
Description:
The DTE to which a call needs to be made is not configured on any interface.

XTP.007

Level:
UI-ERROR
Short Syntax:
XTP.007 call req to dte dteaddr, from peer ipaddr failed
Long Syntax:
XTP.007 Call request to DTE dteaddr, from peer ipaddr failed
Description:
The call request made to the DTE failed.

XTP.008

Level:
U-INFO
Short Syntax:
XTP.008 tcp pkt or x25 pkt has invalid cktid
Long Syntax:
XTP.008 We received a tcp packet or an x.25 pkt with invalid circuit id in it.
Description:
It could be just a cleaning up phase and probably would not effect anything.

XTP.009

Level:
UI-ERROR
Short Syntax:
XTP.009 tcp pkt alloc failed
Long Syntax:
XTP.009 Memory allocation for XTP tcp packet failed
Description:
Allocation of an XTP TCP packet failed.

XTP.010

Level:
UI-ERROR
Short Syntax:
XTP.010 unkn x25 data type recvd in tcp pkt
Long Syntax:
XTP.010 X.25 data encapsulated in TCP packet is neither Q nor U data.
Description:
The X.25 data contained in the TCP message is invalid.

XTP.011

Level:
UI-ERROR
Short Syntax:
XTP.011 data xfer req from peer ipaddr on an inactive x25 ckt
Long Syntax:
XTP.011 TCP Request from peer ipaddr to send data on an inactive X.25 circuit is received.
Description:
Data cannot be sent over the X.25 circuit as it is not in the active state.

XTP.012

Level:
UI-ERROR
Short Syntax:
XTP.012 data xfer req from peer ipaddr, on nt network ID failed
Long Syntax:
XTP.012 Data from peer ipaddr, could not be sent on net network ID
Description:
Data could not be sent over the X.25 circuit.

XTP.013

Level:
UI-ERROR
Short Syntax:
XTP.013 mem alloc failed in function_name
Long Syntax:
XTP.013 Memory allocation failed in function function_name
Description:
The router could not allocate memory.

XTP.014

Level:
UI-ERROR
Short Syntax:
XTP.014 network ID
Long Syntax:
XTP.014 network ID
Description:
This is an XTP generic debug message.

XTP.015

Level:
UI-ERROR
Short Syntax:
XTP.015 call req from rmt dte dteaddr, on peer ipaddr, to local dte dteaddr failed
Long Syntax:
XTP.015 Call request from DTE dteaddr, configured on peer ipaddr, to local DTE dteaddr failed
Description:
The X.25 call request failed.

XTP.016

Level:
U-INFO
Short Syntax:
XTP.016 no pvcs from peer ipaddr to local dtes
Long Syntax:
XTP.016 TCP message having PVC info from ipaddr is empty
Description:
There are no PVCs configured between the DTEs attached to the two routers.

XTP.017

Level:
U-INFO
Short Syntax:
XTP.017 xtp init successful
Long Syntax:
XTP.017 XTP forwarder initialization on the router is successful
Description:
The XTP forwarder initialized successfully.

XTP.018

Level:
UI-ERROR
Short Syntax:
XTP.018 equip type not set in X.25 cnfg
Long Syntax:
XTP.018 The interface needs to be set as a DTE or DCE in X.25 configuration
Description:
The interface type of the router is not set.
Cause:
The interface type needs to be set in X.25 configuration.

XTP.019

Level:
UI-ERROR
Short Syntax:
XTP.019 multiple dtes configured on dce interface interface
Long Syntax:
XTP.019 More than one DTE has been configured on DCE interface interface
Description:
Multiple DTEs are configured on an interface of equipment type DCE.

XTP.020

Level:
UI-ERROR
Short Syntax:
XTP.020 internal ip addr not set
Long Syntax:
XTP.020 The internal IP address has not been set in IP config
Description:
The internal IP address of the router is not set.
Action:
Set the internal IP address at the IP config> prompt.

XTP.021

Level:
U-INFO
Short Syntax:
XTP.021 net dwn, nt network ID
Long Syntax:
XTP.021 net down for net network ID
Description:
This message is generated when the net goes down.

XTP.022

Level:
UI-ERROR
Short Syntax:
XTP.022 pvc req for unconfigured local dte dteaddr
Long Syntax:
XTP.022 A PVC is configured for a unconfigured local DTE dteaddr
Description:
Configure the local DTE.

XTP.023

Level:
UI-ERROR
Short Syntax:
XTP.023 excess pvcs configured
Long Syntax:
XTP.023 The number of PVCs configured exceeds the limit
Description:
More than the defined limit of PVCs are configured.

XTP.024

Level:
UI-ERROR
Short Syntax:
XTP.024 recv on null tcb
Long Syntax:
XTP.024 Receive posted on null tcb
Description:
The receive is posted on a null tcb.

XTP.025

Level:
UI-ERROR
Short Syntax:
XTP.025 null iob recvd on tcp
Long Syntax:
XTP.025 The iob received on TCP is null
Description:
A null iob was received over TCP.

XTP.026

Level:
UI-ERROR
Short Syntax:
XTP.026 tcp post rcv failed
Long Syntax:
XTP.026 The receive posted by TCP failed
Description:
XTP posted a read request to TCP in order to receive data. The read request completed abnormally. This is an indication that the TCP connection has failed.

XTP.027

Level:
UI-ERROR
Short Syntax:
XTP.027 xtp_tcp hdr rcvd from peer ipaddr, has invalid msg size msg_size
Long Syntax:
XTP.027 xtp_tcp header received from peer ipaddr, has an invalid message size msg_size .
Description:
The message size in the xtp_tcp header is invalid.

XTP.028

Level:
UI-ERROR
Short Syntax:
XTP.028 null apphnd in tcbp
Long Syntax:
XTP.028 The application handle is NULL in the tcbp
Description:
The application handle in the tcbp is null.

XTP.029

Level:
UI-ERROR
Short Syntax:
XTP.029 tcp sess to peer ipaddr is reset
Long Syntax:
XTP.029 The TCP session to peer ipaddr is being reset
Description:
The TCP session is reset.

XTP.030

Level:
UI-ERROR
Short Syntax:
XTP.030 tcp send to peer ipaddr failed
Long Syntax:
XTP.030 TCP send to peer ipaddr failed
Description:
The TCP call to send data failed.

XTP.031

Level:
UI-ERROR
Short Syntax:
XTP.031 x25 api reg failed on int interface
Long Syntax:
XTP.031 Registration with the X.25 service failed on interface interface
Description:
The X.25 API call to register with X.25 service failed.

XTP.032

Level:
U-INFO
Short Syntax:
XTP.032 xtp listening on tcp port port
Long Syntax:
XTP.032 TCP component of XTP did a passive open on tcp port port
Description:
The XTP TCP module successfully did a passive open.

XTP.033

Level:
UI-ERROR
Short Syntax:
XTP.033 xtp passive open failed on tcp port port
Long Syntax:
XTP.033 TCP component of XTP did a passive open on port port which failed
Description:
The XTP TCP module failed doing a passive open.

XTP.034

Level:
U-INFO
Short Syntax:
XTP.034 xtp active open from ipaddr
Long Syntax:
XTP.034 TCP component of XTP did a active open from ipaddr
Description:
The XTP TCP module successfully did an active open.

XTP.035

Level:
UI-ERROR
Short Syntax:
XTP.035 xtp tcp active open from ipaddr failed
Long Syntax:
XTP.035 TCP component of XTP did a failed active open from ipaddr
Description:
The XTP TCP module failed doing an active open.

XTP.036

Level:
U-INFO
Short Syntax:
XTP.036 tcp cnn from unconfigured peer ipaddr not accepted
Long Syntax:
XTP.036 TCP connection from unconfigured peer ipaddr not accepted
Description:
The router from which a connection request is received is not configured as a peer router.

XTP.037

Level:
UI-ERROR
Short Syntax:
XTP.037 rtr with greater IP addr ipaddr - an error
Long Syntax:
XTP.037 Some how an router with greater IP address does an active open, against the design. src ipaddr
Description:
An active open from a greater ipaddr was received at a lower ipaddr. This is an error.

XTP.038

Level:
U-INFO
Short Syntax:
XTP.038 closing prev tcp cnn to peer ipaddr
Long Syntax:
XTP.038 Closing previously opened TCP connection to ipaddr
Description:
A previously opened TCP connection is closed.

XTP.039

Level:
U-INFO
Short Syntax:
XTP.039 tcp cnn estab from ipaddr
Long Syntax:
XTP.039 TCP connection established between ipaddr
Description:
The TCP connection is established between peer routers.

XTP.040

Level:
UI-ERROR
Short Syntax:
XTP.040 fatal err in xtpcopyunsl()
Long Syntax:
XTP.040 Fatal error in xtpcopyunsl()
Description:
There is a fatal error in xtpcopyunsl().

XTP.041

Level:
U-INFO
Short Syntax:
XTP.041 tcp msg msg_type, sent to router ipaddr
Long Syntax:
XTP.041 TCP packet containing message msg_type, is sent to router ipaddr
Description:
The router sends a TCP message that could mean one of the following: TCP_CLEAR_REQ, TCP_CLEAR_REQ, TCP_RNR_REQ, TCP_RR_REQ, TCP_KEEP_ALIVE, TCP_PVC_INFO, TCP_CLEAR_REQ, TCP_PVC_DOWN, TCP_CALL_REQ, TCP_CLEAR_REQ, TCP_CALL_ACC, TCP_RESET_REQ.

XTP.042

Level:
U-INFO
Short Syntax:
XTP.042 tcp msg Network ID
Long Syntax:
XTP.042 TCP packet containing message Network ID
Description:
The router received a TCP message that could mean one of the following: TCP_UDATA, TCP_QDATA, TCP_IDATA, TCP_CALL_REQ, TCP_CALL_ACC, TCP_CLEAR_REQ, TCP_RESET_REQ, TCP_RR_REQ, TCP_RNR_REQ, TCP_PVC_INFO, TCP_PVC_DOWN, TCP_KEEP_ALIVE, Invalid TCP type.

XTP.043

Level:
UI-ERROR
Short Syntax:
XTP.043 tcp cnn to Network ID
Long Syntax:
XTP.043 TCP connection to Network ID has reached limit.
Description:
As one TCP connection carries multiple SVCs and if data comes too fast on SVCs, TCP cnn is unable to handle so much traffic.

XTP.044

Level:
U-INFO
Short Syntax:
XTP.044 peer ipaddr closed tcp cnn
Long Syntax:
XTP.044 Remote host ipaddr has closed the TCP connection.
Description:
Connection has been closed, do the clean up.

XTP.045

Level:
U-INFO
Short Syntax:
XTP.045 appln handle in tcbp retn from tcp NULL
Long Syntax:
XTP.045 In a TCP upcall we found that application handle for a TCP connection is NULL
Description:
This may not be a terrible error.

XTP.046

Level:
UI-ERROR
Short Syntax:
XTP.046 invalid message size msg_size requested for transport on TCP
Long Syntax:
XTP.046 The message size msg_size requested by X.25 for transport on TCP is invalid.
Description:
Check the message sizes in X.25.

XTP.047

Level:
UI-ERROR
Short Syntax:
XTP.047 request to send on a non-established TCP connection
Long Syntax:
XTP.047 You got a request to forward either x25 call req, x25 data on a non-established TCP connection.
Description:
There is a possible misconfiguration in XTP or X.25.

XTP.048

Level:
UI-ERROR
Short Syntax:
XTP.048 invalid tcp cnn, src and dst same - ipaddr
Long Syntax:
XTP.048 Peer IP address same as the local IP address - ipaddr .
Description:
Check the configuration of the IP address under XTP.

XTP.049

Level:
UI-ERROR
Short Syntax:
XTP.049 called x.25 address dteaddr not configured as rmt dte
Long Syntax:
XTP.049 Called X.25 DTE address dteaddr in the call request packet is not configured in XTP.
Description:
Check the configuration of the remote DTE addresses under XTP.

XTP.050

Level:
UI-ERROR
Short Syntax:
XTP.050 pvc with lcn lcn not configured in x25
Long Syntax:
XTP.050 PVC with LCN lcn is configured in XTP but not in X.25
Description:
Configure the PVC in X.25 also.

XTP.051

Level:
UI-ERROR
Short Syntax:
XTP.051 xtp init not successful on nt network ID
Long Syntax:
XTP.051 XTP is not successfully initialized on net network ID
Description:
The interface in question can be down or not of X25 type or XTP was not configured on the interface.