ELS Messages for X.25 Network Interface Physical Layer (X251)
- Level:
- C-INFO
- Short Syntax:
- X251.001 Mdm sts chg: DSR/DCD/CTS DSR
/ DCD
/ CTS
nt network ID
- Long Syntax:
- X251.001 Modem status changed DSR = DSR
DCD = DCD
CTS = CTS
on network network ID
- Description:
- The (input) modem control signals have changed, the present state
of the input signals is as specified.
- Level:
- C-INFO
- Short Syntax:
- X251.002 Tx Abt nt network ID
- Long Syntax:
- X251.002 Transmit Abort command network network ID
- Description:
- The upper (frame) layer has requested that all outbound frames
queued for transmission be aborted.
- Level:
- C-INFO
- Short Syntax:
- X251.003 Srl prt up, nt network ID
- Long Syntax:
- X251.003 Serial port came up sucessfully, on network network ID
- Description:
- x25_s2 routine liked the results of the load and init.
- Level:
- UI-ERROR
- Short Syntax:
- X251.004 TxCmp Rsys Schd fll nt network ID
- Long Syntax:
- X251.004 Rsys ring full on Transmit complete: network network ID
- Description:
- An attempt to enqueue a transmit complete notification to the frame
layer of X.25 failed, due to a full internal scheduler ring. This will
result in the loss of buffers.
- Level:
- UI-ERROR
- Short Syntax:
- X251.005 RxCmp Rsys Schd fll nt network ID
- Long Syntax:
- X251.005 Rsys ring full on Receive complete: network network ID
- Description:
- An attempt to enqueue a receive complete notification to the frame
layer of X.25 failed, due to a full internal scheduler ring. This will
result in the loss of buffers.
- Level:
- CE_ERROR
- Short Syntax:
- X251.006 RxOvr nt network ID
- Long Syntax:
- X251.006 Receiver overrun: frame too long network network ID
- Description:
- A frame was received with a correct CRC, but which exceeded
the (configured) maximum length.
- Level:
- CE_ERROR
- Short Syntax:
- X251.007 RxErr st status
nt network ID
- Long Syntax:
- X251.007 Receiver error: Erroneous frame (driver status status
) received on network network ID
- Description:
- A frame was received in error (bad CRC, modem signals down, etc).
- Level:
- C-INFO
- Short Syntax:
- X251.008 Frm Rxd nt network ID
- Long Syntax:
- X251.008 Frame received from network network ID
- Description:
- A good frame was received from the network.
- Level:
- CE-ERROR
- Short Syntax:
- X251.009 Frm Tx Flsh nt network ID
- Long Syntax:
- X251.009 Outbound frame flushed on network network ID
- Description:
- A frame transmit was aborted due to protocol state or event.
- Level:
- CE-ERROR
- Short Syntax:
- X251.010 Frm Txd Fail st status
nt network ID
- Long Syntax:
- X251.010 Frame transmission failed, status status
, on network network ID
- Description:
- A frame transmission to the network failed; the driver returned the
specified status.
- Level:
- C-INFO
- Short Syntax:
- X251.011 Frm Txd nt network ID
- Long Syntax:
- X251.011 Frame sucessfully transmitted to network network ID
- Description:
- A frame was successfully transmitted to the network.
- Level:
- CI-ERROR
- Short Syntax:
- X251.012 Cfg err nt network ID
- Long Syntax:
- X251.012 Configuration error on network index network ID
- Description:
- The X.25 network handler cannot continue initialization due to
a missing datum or conflict in the network configuration.
Check the node address, Virtual Circuit ranges and PVC assignments
(if any).
- Level:
- CE-ERROR
- Short Syntax:
- X251.013 Tx flsh cmp network ID
- Long Syntax:
- X251.013 Outbound buffer flush completed by driver on network network ID
- Description:
- A protocol event has required that the frame layer flush all buffers
queued to the driver. It does so by issuing a flush command. The
driver marks the last such buffer, which yields this message.
- Level:
- UI-ERROR
- Short Syntax:
- X251.014 Bad tkn vcb vocab
cmd cmd
fm frm
ext ext
buf buf
net network ID
- Long Syntax:
- X251.014 An internal message (token) with an unrecognized class ( vocab
) was received. The Command, From, Argument and Ptr entries were cmd
, frm
, ext
, buf
(respectively) on network network ID
.
- Description:
- The physical layer software has received an internal message which it
does not recognize. This message was ignored. Please inform
customer service of this event.
- Level:
- UI-ERROR
- Short Syntax:
- X251.015 Bad tkn cmd cmd
vcb vocab
fm frm
ext ext
buf buf
net network ID
- Long Syntax:
- X251.015 Am internal message (token) GCOM token with an unrecognized command ( cmd
) was received. The Command, From, Argument and Ptr entries were (respectively): vocab
, frm
, ext
, buf
on network network ID
.
- Description:
- The physical layer software has received an internal message which it
does not recognize. This message was ignored. Please inform
customer service of this event.
- Level:
- U_TRACE
- Short Syntax:
- X251.016 X25 bd slot slot_num
PUD stat pud_stat
- Long Syntax:
- X251.016 X25 board slot slot_num
Power-On Diagnostics status pud_stat
- Description:
- X25 Board Power-On Diagnostics status completed with the code
shown. See Power-On Diagnostics manual for encoding.