ELS Messages for VoIP Subsystem


VOIP.001

Level:
CE-ERROR
Short Syntax:
VOIP.001 Disc blocked_protocol pkt from source_ip_address to dest_ip_addr : nt Network ID
Long Syntax:
VOIP.001 Discarded blocked_protocol pkt from source_ip_address to dest_ip_addr : net Network ID
Description:
A telnet, HTTP, or SNMP packet was sent to the VoIP board from the specified source address, but has been blocked and discarded.
Cause:
An entity is trying to exchange telnet, web, or SNMP traffic directly with the VoIP board. To interact with the VoIP board, telnet, web, and SNMP traffic must be directed to one of the router's IP interface addresses -- not the VOIP board's IP address.
Action:
None. Direct access is blocked by the router.

VOIP.002

Level:
P-TRACE
Short Syntax:
VOIP.002 Passing pkt from source_ip_address to VoIP dev at destination_ip_address
Long Syntax:
VOIP.002 Passing packet from source_ip_address for VoIP device at destination_ip_address
Description:
This message is generated for each packet destined for the VoIP board which has not been discarded for being telnet, web, SNMP, and not discarded by NAT and IPDF.

VOIP.003

Level:
P-TRACE
Short Syntax:
VOIP.003 Sending magic ping to VoIP, src source_ip_address , dst destination_ip_address
Long Syntax:
VOIP.003 Sending magic ping to VoIP, src source_ip_address , dst destination_ip_address
Description:
Generated for each "magic ping" sent to the VoIP board. Magic pings are used to convey router and VoIP board IP addresses to the VoIP board.

VOIP.004

Level:
CE-ERROR
Short Syntax:
VOIP.004 Disc pkt due to failed n_send() to VoIP device
Long Syntax:
VOIP.004 Disc pkt due to failed n_send() to VoIP device
Description:
Generated when the VoIP "short-circuit" routing path receives a failure indication from the VoIP device's n_send function.

VOIP.005

Level:
P-TRACE
Short Syntax:
VOIP.005 Mbx msg rcvd from source_processor - message_type message_subtype
Long Syntax:
VOIP.005 Mailbox message received from source_processor - message_type message_subtype
Description:
A mailbox message was received from the specified processor.

VOIP.006

Level:
P-TRACE
Short Syntax:
VOIP.006 Mbx msg sent to destination_processor - message_type message_subtype
Long Syntax:
VOIP.006 Mailbox message sent to destination_processor - message_type message_subtype
Description:
A mailbox message was sent to the specified processor.

VOIP.007

Level:
P-TRACE
Short Syntax:
VOIP.007 Unknown mbx msg rcvd from destination_processor - message_hdr
Long Syntax:
VOIP.007 Unknown mailbox message received from destination_processor - message_hdr
Description:
An unknown mailbox message was received from the specified processor.

VOIP.008

Level:
P-TRACE
Short Syntax:
VOIP.008 Sending MAC Address: mac_addr1 mac_addr2 mac_addr3 mac_addr4 mac_addr5 mac_addr6
Long Syntax:
VOIP.008 Sending MAC Address: mac_addr1 mac_addr2 mac_addr3 mac_addr4 mac_addr5 mac_addr6
Description:
A MAC Address has been sent to the voice board with the specified value.

VOIP.009

Level:
P-TRACE
Short Syntax:
VOIP.009 Sending IP Address: ip_addr Mask: ip_mask
Long Syntax:
VOIP.009 Sending IP Address: ip_addr Mask: ip_mask
Description:
An IP Address has been sent to the voice board with the specified value.

VOIP.010

Level:
P-TRACE
Short Syntax:
VOIP.010 Sending Gateway Address: gw_addr
Long Syntax:
VOIP.010 Sending Gateway Address: gw_addr
Description:
A Gateway Address has been sent to the voice board with the specified value.

VOIP.011

Level:
C-INFO
Short Syntax:
VOIP.011 Info msg - log_msg
Long Syntax:
VOIP.011 Information message - log_msg
Description:
The voice board wants the router to log an information message.

VOIP.012

Level:
CE-ERROR
Short Syntax:
VOIP.012 Err msg - log_msg
Long Syntax:
VOIP.012 Error message - log_msg
Description:
The voice board wants the router to log an error message.

VOIP.013

Level:
P-TRACE
Short Syntax:
VOIP.013 Sending Time Server Address: timesvr_addr and offset offset
Long Syntax:
VOIP.013 Sending Time Server Address: timesvr_addr and offset offset
Description:
The IP address of the time server to be used by the voice board along with the time zone offset in minutes.

VOIP.014

Level:
CE-ERROR
Short Syntax:
VOIP.014 No heartbeat msg rcvd from source_processor - resetting voice card
Long Syntax:
VOIP.014 No heartbeat message received from source_processor - resetting voice card
Description:
No heartbeat message was received from the specified processor for the given period of time. This indicates that the voice card is no longer functioning and must be reset.

VOIP.015

Level:
C-INFO
Short Syntax:
VOIP.015 Voice card reset to run appname (TSEL= tsel )
Long Syntax:
VOIP.015 Voice card reset to run appname (TSEL= tsel )
Description:
The voice card is being reset, either due to a watchdog timeout or operator request.

VOIP.016

Level:
CE-ERROR
Short Syntax:
VOIP.016 Timeout during shutdown, processor_id failed to respond
Long Syntax:
VOIP.016 Timeout during shutdown, processor_id failed to respond
Description:
The voice card is given 10 seconds to acknowlege a shutdown warning message. If no reply is received, the voice card is reset without further warnings.