ELS Messages for SDLC Relay (SRLY)
- Level:
- UI-ERROR
- Short Syntax:
- SRLY.001 invld cnfgrton ip addr cnfgd on nt networkID
- Long Syntax:
- SRLY.001 Invalid router configuration because an IP address has been configured on network networkID
- Description:
- IP addresses are not allowed to be configured on the SDLC relay
interfaces.
- Level:
- UI-ERROR
- Short Syntax:
- SRLY.002 unsptd intf nt networkID
- Long Syntax:
- SRLY.002 unsupported interface on network networkID
- Description:
- An unsupported network interface had been configured on the SDLC relay
group.
- Level:
- C-INFO
- Short Syntax:
- SRLY.003 SDLC relay intf init strt nt networkID
- Long Syntax:
- SRLY.003 SDLC relay initialization started on network networkID
- Description:
- The SDLC relay forwarder began initialization on the relay interface.
- Level:
- C-INFO
- Short Syntax:
- SRLY.004 SDLC relay intf init cmpl nt networkID
- Long Syntax:
- SRLY.004 SDLC relay initialization completed on network networkID
- Description:
- The SDLC Relay forwarder completed initialization on the relay
interface.
- Level:
- UI-ERROR
- Short Syntax:
- SRLY.005 disc scndry->prmry pkt addr SRLY_addr
H net congestd on nt networkID
- Long Syntax:
- SRLY.005 Discard SDLC frame with sdlc address SRLY_addr
H heading to primary station due to network congestion on network networkID
- Description:
- A SDLC frame had been discarded out a network interface due to
congestion.
- Cause:
- Bursty traffic may be causing outbound frame congestion or
internal software inconsistancies exists.
check bridge configuration.
- Level:
- C-TRACE
- Short Syntax:
- SRLY.006 added prmry->scndry pkt addr SRLY_address
H on nt networkID
to sdlc qu
- Long Syntax:
- SRLY.006 Added packet received on primary side with SDLC address SRLY_address
H on network networkID
onto the sdlc queue.
- Description:
- This message is generated whenever the forwarder receives a SDLC relay
frame from a primary port (port directly or indirectly attached to a
primary station) destined for a secondary port (port directly or
indirectly attached to a secondary station).
- Level:
- C-TRACE
- Short Syntax:
- SRLY.007 added scndry->prmry pkt addr SRLY_address
H on nt networkID
to sdlc qu
- Long Syntax:
- SRLY.007 Added packet received on secondary side with SDLC address SRLY_address
H on network networkID
onto the sdlc queue.
- Description:
- This message is generated whenever the forwarder receives a SDLC relay
frame from a secondary port (port directly or indirectly attached to
a secondary station) destined for a primary port (port directly or
indirectly attached to a primary station).
- Level:
- CE-ERROR
- Short Syntax:
- SRLY.008 frm disc grp group_num
not dfned nt networkID
- Long Syntax:
- SRLY.008 A SDLC relay frame discarded due to group group_num
defined in the frame received from the network networkID
not being defined in the router.
- Description:
- A SDLC relay frame has been discarded due to the group number of the
frame not being defined for that router.
- Level:
- CE-ERROR
- Short Syntax:
- SRLY.009 frm disc grp group_num
dsbld nt networkID
- Long Syntax:
- SRLY.009 A SDLC relay frame discarded due to group group_num
being disabled for frame coming in from the network networkID
.
- Description:
- A SDLC relay frame has been discarded due to the group not being
enabled.
- Level:
- CE-ERROR
- Short Syntax:
- SRLY.010 frm with sdlc addr SRLY_addr
H grp group_num
disc src prmry port dsbld
- Long Syntax:
- SRLY.010 A SDLC relay frame with sdlc address SRLY_addr
H discarded due to the source primary port of group group_num
being disabled.
- Description:
- A SDLC relay frame has been discarded due to the source port(where
the frame was coming from) being disabled.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.011 disc rcved frm from prmry but prt dclrd as sndry for grp group_num
- Long Syntax:
- SRLY.011 A SDLC relay frame discarded due to the port being misconfigured in the group group_num
.
- Description:
- A SDLC relay frame has been discarded due to the SDLC relay ports
being inconsistently configured. The router on one side has the port
configured as a primary, while the router on the other side has the
same port configured as a secondary.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.012 frm disc src prt sdlc addr SRLY_addr
H not found in grp group_num
- Long Syntax:
- SRLY.012 A SDLC relay frame discarded due to the src port with sdlc address SRLY_addr
H specified in the frame not being found in group group_num
.
- Description:
- A SDLC relay frame has been discarded due to the src port with the
sdlc address specified in the frame not being found in the group
specified. This is a result of user misconfiguration of the group.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.013 frm with sdlc addr SRLY_addr
H grp group_num
disc dst prmry port dsbld
- Long Syntax:
- SRLY.013 A SDLC relay frame with sdlc address SRLY_addr
H discarded due to the destination primary port of group group_num
being disabled.
- Description:
- A SDLC relay frame has been discarded due to the destination port
(where the frame was heading to) being disabled.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.014 frm disc prt dst sdlc addr SRLY_addr
H not fnd in grp group_num
- Long Syntax:
- SRLY.014 A SDLC relay frame discarded due to the destination port sdlc address SRLY_addr
H specified in the packet not being found in group group_num
.
- Description:
- A SDLC relay frame has been discarded due to the destination port with
the sdlc address specified in the frame not being found in the group
specified. This is a result of user misconfiguration of the group.
The specific port with sdlc address %d was not added to the group.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.015 frm with dst sdlc addr SRLY_addr
H disc rly dwn or rly dsbld nt networkID
- Long Syntax:
- SRLY.015 SDLC frame with dst sdlc addr SRLY_addr
H discarded due to relay down condition on network networkID
- Description:
- A SDLC frame had been discarded due to the SDLC relay failing to
forward out a network interface which had been in a down state.
This message will be printed if the network is down or if IP is not
not currently enabled; if IP is not enabled, no SDLC relay can take
place, so the frame is simply discarded.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.016 dsc scndry->prmry frm sdlc addr SRLY_addr
H rjd rsn = reason
on nt networkID
- Long Syntax:
- SRLY.016 discard net rejected sdlc frame address SRLY_addr
H heading for primary station with reject reason = reason
on network networkID
- Description:
- A SDLC relay frame has rejected by the network interface and
discarded.
- Level:
- P-TRACE
- Short Syntax:
- SRLY.017 disc frm src_SRLY_addr
H -> dst_SRLY_addr
H nt networkID
- Long Syntax:
- SRLY.017 discarded frame with source addr src_SRLY_addr
H and destination addr dst_SRLY_addr
H on network networkID
- Description:
- A frame had been discarded due to SDLC relay not configured on
interface noted.
- Cause:
- The null or fake forwarder is configured on the interface, all
received SDLC relay frames are discarded.
- Level:
- C-INFO
- Short Syntax:
- SRLY.018 frwrd SRLY frm scndry->prmry sdlc addr SRLY_addr
H nt networkID
- Long Syntax:
- SRLY.018 forwarded SDLC Relay frame from secondary station destined for primary station with frame sdlc address SRLY_addr
H on network networkID
- Description:
- A frame travelling in the direction of secondary->primary station has
been forwarded out onto the interface noted.
- Level:
- C-INFO
- Short Syntax:
- SRLY.019 frwrd SRLY frm prmry->scndry sdlc addr SRLY_addr
H nt networkID
- Long Syntax:
- SRLY.019 forwarded SDLC Relay frame from primary station destined for secondary station with frame sdlc address SRLY_addr
H on network networkID
- Description:
- A frame travelling in the direction of primary->secondary station has
been forwarded out onto the interface noted.
- Level:
- UI-ERROR
- Short Syntax:
- SRLY.020 dsc frm from nt networkID
IP not enbled
- Long Syntax:
- SRLY.020 discard sdlc frame from network networkID
because IP is not enabled on router
- Description:
- A SDLC relay frame has discarded because in order for SDLC relay to
work, IP has to be enabled on the router. The user must add at least
one IP address to at least one of its non-SDLC relay interfaces.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.021 frm not fwrd dst ip addr ip_address
mscnfgrd grp group_num
- Long Syntax:
- SRLY.021 Frame not forwarded because the destination ip addresses ip_address
for group group_num
is one of the ip addresses configured on the source router.
- Description:
- This message is generated when the forwarder must discard a
packet because the destination ip address configured for the group
is one of the ip addresses configured on the source router.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.022 disc frm grp group_num
cnfg bad
- Long Syntax:
- SRLY.022 Frame discarded because group group_num
configuration is bad.
- Description:
- This message is generated when the forwarder must discard a
packet because the group configuration among the routers participating
in SDLC relay are inconsistent with each other. Check to make sure
the primary and secondary attributes of the ports in groups are
consistent.
- Level:
- C-INFO
- Short Syntax:
- SRLY.023 IP dest ip_address
unrchble
- Long Syntax:
- SRLY.023 The IP destination ip_address
is unreachable.
- Description:
- This message is generated when the encapsulated SDLC frame is lost
due to the IP destination address specified in the frame being
unreachable. The software will try to use the next IP address
configured to resend the frame. If there are no more addresses, the
software will drop the packet. The user should try to delete the
IP address from the IP address list using the command DELETE IP-ADDRESS
command.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.024 disc prmry->scndry pkt addr SRLY_addr
H net congestd on nt networkID
- Long Syntax:
- SRLY.024 Discard SDLC frame with sdlc address SRLY_addr
H heading to secondary station due to network congestion on network networkID
- Description:
- A SDLC frame had been discarded out a network interface due to
congestion.
- Cause:
- Bursty traffic maybe causing outbound frame congestion or
internal software inconsistancies exists.
check bridge configuration.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.025 frm with sdlc addr SRLY_addr
H grp group_num
disc src scndry port dsbld
- Long Syntax:
- SRLY.025 A SDLC relay frame with sdlc address SRLY_addr
H discarded due to the source secondary port of group group_num
being disabled.
- Description:
- A SDLC relay frame has been discarded due to the source port(where
the frame was coming from) being disabled.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.026 frm with sdlc addr SRLY_addr
H grp group_num
disc dst scndry port dsbld
- Long Syntax:
- SRLY.026 A SDLC relay frame with sdlc address SRLY_addr
H discarded due to the destination secondary port of group group_num
being disabled.
- Description:
- A SDLC relay frame has been discarded due to the destination port
(where the frame was heading to) being disabled.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.027 dsc prmry->scndry frm sdlc addr SRLY_addr
H rjd rsn = reason
on nt networkID
- Long Syntax:
- SRLY.027 discard net rejected sdlc frame address SRLY_addr
H heading for secondary station with reject reason = reason
on network networkID
- Description:
- A SDLC relay frame has rejected by the network interface and
discarded.
- Level:
- CI-ERROR
- Short Syntax:
- SRLY.028 dsc frm grp group_addr
no ip addr cnfgrd
- Long Syntax:
- SRLY.028 discard frame no ip address configured for group group_addr
- Description:
- A SDLC relay frame destined for a far router has been discarded
because no IP address has been configured for the remote port.
- Panic
- SRLYimem
- Short Syntax:
- SRLY mem alloc fld
- Description:
- The SRLY forwarder failed to allocate sufficient memory to complete
initialization.
- Action:
- Contact customer service.
- Panic
- sdlcudperr
- Short Syntax:
- sdlc udp port not avail
- Description:
- Another application registered previously with srly's UDP port.
- Action:
- Contact customer service.