ELS Messages for ProNet-10/80 (PN)
- Level:
- UE-ERROR
- Short Syntax:
- PN.001 test_phase
tst rcvd packets_received
of packets_sent
nt network
- Long Syntax:
- PN.001 test_phase
test received packets_received
packets of packets_sent
sent network network
- Description:
- The indicated phase of the Pronet-10/80 self-test did not receive
enough packets to operate reliably. Therefore, the self-test has been terminated
and the interface marked down.
- Level:
- UI-ERROR
- Short Syntax:
- PN.002 bd IP addr IP_host_address
nd node_address
nt network
- Long Syntax:
- PN.002 IP address IP_host_address
does not match node address node_address
network network
- Description:
- The low order part of the interface's IP address does not match the
node address set in the hardware switches. The network is marked down.
- Level:
- UI-ERROR
- Short Syntax:
- PN.003 bd CH addr CHAOS_host_address
nd node_address
nt network
- Long Syntax:
- PN.003 CH address CHAOS_host_address
does not match node address node_address
network network
- Description:
- The low order part of the interface's CHAOS address does not match the
node address set in the hardware switches. The network is marked down.
- Level:
- UI-ERROR
- Short Syntax:
- PN.004 ill nd node_address
for IPX nt network
- Long Syntax:
- PN.004 illegal node address node_address
for IPX network network
- Description:
- The appropriate part of the interface's IPX address does not match the
node address set in the hardware switches. The network is marked down.
- Level:
- UI-ERROR
- Short Syntax:
- PN.005 bd apl nd AppleTalk_address
cnflcts wth nd node_address
nt network
- Long Syntax:
- PN.005 bad Appletalk node AppleTalk_address
conflicts with hardware node node_address
network network
- Description:
- The interface's AppleTalk address does not match the
node address set in the hardware switches. The network is marked down.
- Level:
- CE-ERROR
- Short Syntax:
- PN.006 IPX pkt bd cks calc calculated_checksum
rec received_checksum
nd source_node
nt network
dsc
- Long Syntax:
- PN.006 IPX packet has bad checksum calculated calculated_checksum
received received_checksum
from node source_node
network network
, discarded
- Description:
- The IPX packet received did not have a checksum that matched the one
calculated from the packet. The packet was discarded.
- Level:
- CE-ERROR
- Short Syntax:
- PN.007 DN pkt bd cks calc calculated_checksum
rec received_checksum
nd source_node
nt network
dsc
- Long Syntax:
- PN.007 DECnet packet has bad checksum calculated calculated_checksum
received received_checksum
from node source_node
network network
, discarded
- Description:
- The DECnet packet received did not have a checksum that matched the one
calculated from the packet. The packet was discarded.
- Level:
- U-INFO
- Short Syntax:
- PN.008 DN bd len act actual_length
clm claimed_length
source_node
-> destination_node
nt network
- Long Syntax:
- PN.008 DECNet bad length actual actual_length
claimed claimed_length
from source_node
to destination_node
network network
- Description:
- The DECNet packet received did not have a length that matched the one
calculated from the packet. The packet was discarded.
- Level:
- P-TRACE
- Short Syntax:
- PN.009 old IPX drv (hdr MPW_version
MPW_protocol
) brd nd source_node
nt network
- Long Syntax:
- PN.009 old IPX driver (header MPW_version
MPW_protocol
) broadcast packet from node source_node
network network
- Description:
- A broadcast IPX packet using the old format was seen on the network.
- Level:
- U-INFO
- Short Syntax:
- PN.010 old IPX drv (hdr MPW_version
MPW_protocol
) nd source_node
nt network
- Long Syntax:
- PN.010 old IPX driver (header MPW_version
MPW_protocol
) from node source_node
network network
- Description:
- An IPX packet was sent directly to the router using the old
format.
- Level:
- UE-ERROR
- Short Syntax:
- PN.011 bd mnt pkt hdr MPW_version
MPW_protocol
frm source_node
nt network
dsc
- Long Syntax:
- PN.011 bad maintenence packet header MPW_version
MPW_protocol
from node source_node
network network
, discarded
- Description:
- A Pronet-10/80 maintenance packet was received with a node number
which did not match that of the interface receiving it. Since these
messages are only sent to the orignating node and never broadcast,
this interface should not have received it.
- Level:
- C-TRACE
- Short Syntax:
- PN.012 bd MW pkt hdr MPW_version
MPW_protocol
brd frm source_node
nt network
dsc
- Long Syntax:
- PN.012 bad MPW protocol value packet header MPW_version
MPW_protocol
broadcast from node source_node
network network
, discarded
- Description:
- The MPW header on the PN-10/80 packet contained a protocol type which
the router did not recognize.
- Level:
- C-TRACE
- Short Syntax:
- PN.013 bd MW pkt hdr MPW_version
MPW_protocol
frm source_node
nt network
dsc
- Long Syntax:
- PN.013 bad MPW protocol value packet header MPW_version
MPW_protocol
from node source_node
network network
, discarded
- Description:
- The MPW header on the PN-10/80 packet contained a protocol type which
the router did not recognize.
- Level:
- C-TRACE
- Short Syntax:
- PN.014 bd MV pkt hdr MPW_version
MPW_protocol
brd frm source_node
nt network
dsc
- Long Syntax:
- PN.014 bad MPW version number packet header MPW_version
MPW_protocol
broadcast from node source_node
network network
, discarded
- Description:
- The MPW header on the PN-10/80 packet contained a version number which
is not the current version.
- Level:
- C-TRACE
- Short Syntax:
- PN.015 bd MV pkt hdr MPW_version
MPW_protocol
frm source_node
nt network
dsc
- Long Syntax:
- PN.015 bad MPW version number packet header MPW_version
MPW_protocol
from node source_node
network network
, discarded
- Description:
- The MPW header on the PN-10/80 packet contained a version number which
is not the current version.