Internet Packet Exchange (IPX) ELS Messages

ELS Messages for Internet Packet Exchange (IPX)

IPX.001

Level:: P-TRACE
Class:: FAKE
Short Syntax:: IPX.001 source_net / source_node -> dest_net / dest_node ign
Long Syntax:: IPX.001 Packet from source_net / source_node for dest_net / dest_node ignored
Description:: An IPX packet arrived on a network. The IPX forwarder is not in this router load. The packet is discarded.

IPX.002

Level:: UI-ERROR
Short Syntax:: IPX.002 q ovf source_net / source_node -> dest_net / dest_node nt network ID
Long Syntax:: IPX.002 Queue overflow, source_net / source_node -> dest_net / dest_node , net network ID
Description:: IPX forwarder input queue has overflowed.
Cause:: More packets are being received than the forwarder can forward.

IPX.003

Level:: UE-ERROR
Short Syntax:: IPX.003 bad hst chksm frm source_net / source_node
Long Syntax:: IPX.003 Bad host checksum from source_net / source_node
Description:: This message is generated when a packet arrives for this host with an incorrect checksum.

IPX.004

Level:: U-INFO
Short Syntax:: IPX.004 err pkt error_type frm source_net / source_node
Long Syntax:: IPX.004 Error packet, errno error_type , received from source_net / source_node
Description:: This message is generated when an error packet is received.

IPX.005

Level:: U-TRACE
Short Syntax:: IPX.005 no hndlr for skt destination_socket typ packet_type frm source_net / source_node
Long Syntax:: IPX.005 No handler for socket destination_socket type packet_type from source_net / source_node
Description:: A packet arrived for an unknown or unsupported socket or type. The packet was a broadcast packet.

IPX.006

Level:: UE-ERROR
Short Syntax:: IPX.006 no hndlr for skt destination_socket typ packet_type frm source_net / source_node
Long Syntax:: IPX.006 No handler for socket destination_socket type packet_type from source_net / source_node
Description:: A packet arrived for an unknown or unsupported socket or type. The packet was addressed to the router.

IPX.007

Level:: UI-ERROR
Short Syntax:: IPX.007 no hst addr set for nt network ID , not enabled
Long Syntax:: IPX.007 no host address set for net network ID , not enabled
Description:: The forwarder was bringing up IPX on the specified serial line interface, but no host address was set so the interface was not enabled.
Cause:: Serial line enabled without setting host address.
Action:: Set IPX host address.

IPX.008

Level:: UE-ERROR
Short Syntax:: IPX.008 SAP bad typ packet_type frm source_net / source_node
Long Syntax:: IPX.008 SAP bad type packet_type from source_net / source_node
Description:: This message is generated when a packet is received with a bad SAP type.

IPX.009

Level:: C-TRACE
Short Syntax:: IPX.009 SAP gen rply frm source_net / source_node
Long Syntax:: IPX.009 SAP general reply from source_net / source_node
Description:: SAP has received a General Reply packet from the specified host. The data in the packet will be used to update the SAP database.

IPX.010

Level:: UI-ERROR
Short Syntax:: IPX.010 SAP tbl ovrfl, dsc type service_type nm [ service_name ]
Long Syntax:: IPX.010 SAP table overflow, discarded type service_type name [ service_name ]
Description:: A new entry cannot be added to the SAP table because it is full. The new entry is discarded.
Cause:: SAP table is smaller than number of services on IPX internet.
Action:: Increase the size of the SAP table.

IPX.011

Level:: UE-ERROR
Short Syntax:: IPX.011 SAP srvc typ service_type nm [ service_name ] mvd to new_net / new_node
Long Syntax:: IPX.011 SAP service type service_type name [ service_name ] moved to new_net / new_node
Description:: A SAP General Reply was received with a different network/address pair than is presently in the SAP database.
Cause:: Duplicate name assigned for service.
Action:: Eliminate duplicated name.
Cause:: Service physically moved faster than SAP timeout.
Action:: Do not move services so fast.

IPX.012

Level:: U-INFO
Short Syntax:: IPX.012 SAP del typ service_type nm [ service_name ]
Long Syntax:: IPX.012 SAP deleted type service_type name [ service_name ]
Description:: A SAP table entry has been declared dead. It will be advertised as unreachable for another 60 seconds, and then removed from the SAP table.
Cause:: No SAP General Reply has been heard containing data on this service type/name pair in 240 seconds.
Action:: None, unless service should be up.

IPX.013

Level:: UE-ERROR
Short Syntax:: IPX.013 SAP bd nearest qry frm source_net / source_node ln length
Long Syntax:: IPX.013 SAP bad length Nearest Service Query from source_net / source_node , len length
Description:: A SAP Nearest Service Query was received with an illegal length.
Cause:: Programming error in remote node.

IPX.014

Level:: C-TRACE
Short Syntax:: IPX.014 SAP nearest qry frm source_net / source_node
Long Syntax:: IPX.014 SAP nearest query from source_net / source_node
Description:: A SAP Nearest Service Query was received from the specified node. It will be answered as appropriate.

IPX.015

Level:: C-TRACE
Short Syntax:: IPX.015 SAP gen qry frm source_net / source_node
Long Syntax:: IPX.015 SAP general query from source_net / source_node
Description:: A SAP General Service Query was received from the specified node. It will be answered as appropriate.

IPX.016

Level:: U-TRACE
Short Syntax:: IPX.016 SAP qry sent nt network ID
Long Syntax:: IPX.016 SAP General Service Query sent, net network ID
Description:: A SAP General Service Query was sent on the specified network. One is sent on a network when it comes up.

IPX.017

Level:: UI-ERROR
Class:: OOM
Short Syntax:: IPX.017 No mem fr SAP bcst nt network ID , count pkts snt
Long Syntax:: IPX.017 No memory for SAP General Service Query or Reply, net network ID , count packets sent
Description:: This message is generated when no buffer is available to send a SAP General Service Query or Reply packet. Since a General Service Reply can require multiple packets, the message notes how many packets were sent on this network before they ran out.

IPX.018

Level:: C-TRACE
Short Syntax:: IPX.018 SAP gen rply sent nt network ID , count pkts
Long Syntax:: IPX.018 SAP General Service Reply sent, net network ID , count packets
Description:: A SAP General Service Reply has just been sent on the specified network. It took the specified number of packets to send the complete SAP database.

IPX.019

Level:: P-TRACE
Short Syntax:: IPX.019 NB brd source_net / source_node -> dest_net / dest_node , nt network ID , hop_count hops
Long Syntax:: IPX.019 NETBIOS broadcast source_net / source_node -> dest_net / dest_node , net network ID , hop_count hops
Description:: A NETBIOS emulation multi-network broadcast packet has been received for forwarding to other IPX networks. The IPX hop count indicates how many routers it has been through.

IPX.020

Level:: U-TRACE
Short Syntax:: IPX.020 NB too many hops frm source_net / source_node nt network ID , ign
Long Syntax:: IPX.020 NETBIOS too many hops from source_net / source_node net network ID , ignored
Description:: A NETBIOS emulation broadcast packet has been through more than 8 routers. It will be dropped.
Cause:: Normal looping due to multiple paths from source of broadcast packet.
Action:: None. This is a normal consequence of the protocol used.
Cause:: IPX NETBIOS traffic trying to go across more than 8 hops (networks) between source and destination.
Action:: Reconfigure network.

IPX.021

Level:: C-TRACE
Short Syntax:: IPX.021 NB frm source_net / source_node nt network ID , already on connected_network , ign
Long Syntax:: IPX.021 NETBIOS from source_net / source_node net network ID , already on connected_network , ignored
Description:: This IPX NETBIOS emulation broadcast packet has already been on one of the directly attached networks. It will not be forwarded, as that would generate a duplicate.
Cause:: This is a normal side effect of the protocol used.

IPX.022

Level:: UI-ERROR
Class:: OOM
Short Syntax:: IPX.022 NB frm source_net / source_node , no mem to cpy
Long Syntax:: IPX.022 NETBIOS from source_net / source_node , no memory to copy
Description:: No memory available to make working copy of this NETBIOS emulation packet to send it out multiple interfaces.

IPX.023

Level:: CI-ERROR
Short Syntax:: IPX.023 NB frm source_net / source_node , non-brd nt network ID unsupp
Long Syntax:: IPX.023 NETBIOS from source_net / source_node , non-broadcast net network ID unsupported
Description:: Attempting to send NETBIOS emulation packet on network that does not support broadcast. The packet will not be sent on that network.

IPX.024

Level:: UI-ERROR
Short Syntax:: IPX.024 NB frm source_net / source_node , un-numbrd nt network ID unsupp
Long Syntax:: IPX.024 NETBIOS from source_net / source_node , un-numbered net network ID unsupported
Description:: Attempting to send NETBIOS emulation packet on a network with no network number. The packet will not be sent on that network.
Cause:: Serial line network operating without a network number.
Action:: If you want to run NETBIOS emulation across a serial line network, it must have a network number.

IPX.025

Level:: UI-ERROR
Class:: OOM
Short Syntax:: IPX.025 NB frm source_net / source_node , no buf to cpy
Long Syntax:: IPX.025 NETBIOS from source_net / source_node , no buffer to copy
Description:: No packet buffer available to copy this NETBIOS emulation broadcast packet into in order to send it on a network.

IPX.026

Level:: UI-ERROR
Short Syntax:: IPX.026 NB snd dsc, nt network ID , rsn reason_code
Long Syntax:: IPX.026 NETBIOS send discarded, net network ID , reason reason_code
Description:: An outgoing NETBIOS emulation broadcast packet was not successfully transmitted for the reason indicated by the error code.
Cause:: Miscellaneous handler error. (Reason code 1.)
Action:: Check for error messages from the handler for network ID.
Cause:: Output queue overflow, or other flow control. (Reason code 2.)
Action:: Alleviate congestion.
Cause:: The network is down. (Reason code 3.)
Action:: See why the handler thinks the network is down.
Cause:: The handler dropped the packet to avoid looping, or bad broadcast. (Reason code 4.)
Action:: Check your configuration.
Cause:: The host is down. (Reason code 5.)
Action:: See why the handler thinks the host is down.

IPX.027

Level:: UE-ERROR
Short Syntax:: IPX.027 bad RIP typ RIP_opcode frm source_net / source_node
Long Syntax:: IPX.027 Bad RIP type RIP_opcode from source_net / source_node
Description:: RIP packet received which was not a request or response.
Cause:: Programming error on remote node.

IPX.028

Level:: C-TRACE
Short Syntax:: IPX.028 RIP resp frm source_net / source_node
Long Syntax:: IPX.028 RIP response from source_net / source_node
Description:: This message is generated when a RIP response packet is received. It will be parsed, and the data incorporated into the routing table.

IPX.029

Level:: UE-ERROR
Short Syntax:: IPX.029 bad net network in RIP frm source_net / source_node
Long Syntax:: IPX.029 Bad network network in RIP from source_net / source_node
Description:: A RIP response was received with an entry having a network number of 00000000 or FFFFFFFF. That entry will be ignored.
Cause:: Programming error on remote node.

IPX.030

Level:: UI-ERROR
Short Syntax:: IPX.030 net route table ovrfl, dscrd network
Long Syntax:: IPX.030 Network routing table overflow, discarding network
Description:: This message is generated when a new network cannot be added to the routing table because it is full. The entry is discarded.
Cause:: Routing table too small.
Action:: Reconfigure IPX protocol to make routing table larger.

IPX.031

Level:: C-INFO
Short Syntax:: IPX.031 RIP route to network now via router_net / router_node , hop_count hops
Long Syntax:: IPX.031 RIP route to network network now via router_net / router_node , hop_count hops
Description:: This message is generated when the route to a network changes. The specified router_net/router_node is now the best route to this network, with the noted number of hops.
Cause:: Newly reachable network (if preceeded by message IPX.055).
Cause:: Change in network topology causes best route to a network to change. This can happen when networks come up, or go down.
Action:: Determine what changes in network topology occurred.

IPX.032

Level:: U-INFO
Short Syntax:: IPX.032 RIP route to network aged away
Long Syntax:: IPX.032 RIP route to network aged away
Description:: This message is generated when a network is declared unreachable because no routing updates have been heard for it in 240 seconds. It will be advertised as unreachable for another 60 seconds, and then deleted from the routing table.
Cause:: Intervening router that was advertising this network crashed.

IPX.033

Level:: C-TRACE
Short Syntax:: IPX.033 Rspnd to RIP rqst frm source_net / source_node
Long Syntax:: IPX.033 Responding to RIP Request from source_net / source_node
Description:: This message is generated when a RIP Request packet is being parsed for a Reply.

IPX.034

Level:: UE-ERROR
Short Syntax:: IPX.034 RIP rqst frm source_net / source_node shrt, ln packet_length
Long Syntax:: IPX.034 RIP Request from source_net / source_node too short, len packet_length
Description:: A RIP request packet was received which is too short to contain one RIP entry. The packet is discarded.

IPX.035

Level:: U-TRACE
Short Syntax:: IPX.035 RIP qry sent nt network ID
Long Syntax:: IPX.035 RIP Query sent, net network ID
Description:: A RIP Query has been sent on the specified interface. A Query is sent on each interface when it comes up.

IPX.036

Level:: UI-ERROR
Class:: OOM
Short Syntax:: IPX.036 No mem for RIP pkt nt network ID , packet_count pkts snt
Long Syntax:: IPX.036 No memory for RIP packet, net network ID , packet_count packets sent
Description:: This message is generated when no buffer is available to send a RIP Query or Response packet.

IPX.037

Level:: C-TRACE
Short Syntax:: IPX.037 RIP resp sent nt network ID , packet_count pkts
Long Syntax:: IPX.037 RIP Response sent net network ID , packet_count packets
Description:: This message is generated when a RIP Response is sent. The response was sent in the specified number of packets.

IPX.038

Level:: U-TRACE
Short Syntax:: IPX.038 source_net / source_node -> dest_net / dest_node ign
Long Syntax:: IPX.038 Packet from source_net / source_node for dest_net / dest_node ignored
Description:: This message is generated when an IPX packet arrives on a network and the IPX forwarder is not active on that network.

IPX.039

Level:: C-TRACE
Short Syntax:: IPX.039 RIP delta resp sent nt network ID , packet_count pkts
Long Syntax:: IPX.039 RIP delta Response sent net network ID , packet_count packets
Description:: This message is generated when a RIP delta Response is sent. This response only includes those networks whose data changed in the last update period. The response was sent in the specified number of packets.

IPX.040

Level:: UI-ERROR
Short Syntax:: IPX.040 RIP resp snd dsc, nt network ID , rsn reason_code
Long Syntax:: IPX.040 RIP Response send discarded, net network ID , reason reason_code
Description:: An outgoing RIP response packet was not successfully transmitted for the reason indicated by the error code.
Cause:: Miscellaneous handler error. (Reason code 1.)
Action:: Check for error messages from the handler for network ID.
Cause:: Output queue overflow, or other flow control. (Reason code 2.)
Action:: Alleviate congestion.
Cause:: The network is down. (Reason code 3.)
Action:: See why the handler thinks the network is down.
Cause:: The handler dropped the packet to avoid looping, or bad broadcast. (Reason code 4.)
Action:: Check your configuration.
Cause:: The host is down. (Reason code 5.)
Action:: See why the handler thinks the host is down.

IPX.041

Level:: UI-ERROR
Short Syntax:: IPX.041 RIP query snd dsc, nt network ID , rsn reason_code
Long Syntax:: IPX.041 RIP Query send discarded, net network ID , reason reason_code
Description:: An outgoing RIP query packet was not successfully transmitted for the reason indicated by the error code.
Cause:: Miscellaneous handler error. (Reason code 1.)
Action:: Check for error messages from the handler for network ID.
Cause:: Output queue overflow, or other flow control. (Reason code 2.)
Action:: Alleviate congestion.
Cause:: The network is down. (Reason code 3.)
Action:: See why the handler thinks the network is down.
Cause:: The handler dropped the packet to avoid looping, or bad broadcast. (Reason code 4.)
Action:: Check your configuration.
Cause:: The host is down. (Reason code 5.)
Action:: See why the handler thinks the host is down.

IPX.042

Level:: C-TRACE
Short Syntax:: IPX.042 SAP gives near reply typ service_type nm [ service_name ] to source_net / source_node , nt network ID
Long Syntax:: IPX.042 SAP giving Nearest Server Reply of type service_type name [ service_name ] to source_net / source_node , net network ID
Description:: A SAP Nearest Service Reply will be sent to the specified node. The service_type is the type of service, and the service_name is the name of the service.
Cause:: Node sent Nearest Server Request, and the nearest server of that type is reachable through this router.

IPX.043

Level:: C-TRACE
Short Syntax:: IPX.043 SAP nearest qry for typ service_type frm source_net / source_node nt network ID
Long Syntax:: IPX.043 SAP Nearest Query for service type service_type from source_net / source_node , net network ID
Description:: A SAP Nearest Service Query was received from the specified node via the specified interface. If this router is the best route to the closest server of the specified service_type, this router will answer.
Cause:: New IPX node booting on an attached LAN, looking for a first file server (service_type of 4).
Cause:: Node attempting to locate a particular server by service type, such as a communications server or database server.

IPX.044

Level:: C-TRACE
Short Syntax:: IPX.044 SAP delta gen rply nt network ID , count pkts
Long Syntax:: IPX.044 SAP delta General Service Reply sent, net network ID , count packets
Description:: A SAP delta General Service Reply has just been sent on the specified network. This Reply only includes those services whose data changed in the last update period. It took the specified number of packets to send the changes in SAP database.

IPX.045

Level:: U-INFO
Short Syntax:: IPX.045 SAP new serv typ service_type nm [ service_name ] via via_net / via_node , hop_count hops, nt network ID
Long Syntax:: IPX.045 SAP new service route to service type service_type name [ service_name ] via via_net / via_node , hop_count hops, net network ID
Description:: This message is generated when a new service is added to the SAP table The specified via_net/via_node is the route to this service, with the noted number of hops.
Cause:: New service started on IPX internetwork.
Cause:: Existing service becomes reachable, due to change in network connectivity.

IPX.046

Level:: U-TRACE
Short Syntax:: IPX.046 SAP nearest qry frm source_net / source_node ignored, nt network ID
Long Syntax:: IPX.046 SAP Nearest Query from source_net / source_node ignored, net network ID
Description:: A SAP Nearest Service Query was received from the specified node via the specified interface, but processing of these packets has been administratively disabled on this interface. The query will be ignored.
Cause:: User has used IPX Config command DISABLE REPLY-TO-GET-NEAREST-SERVER.
Action:: If this is the desired action, none. To enable response (the default), use the IPX Config command ENABLE REPLY-TO-GET-NEAREST-SERVER.

IPX.047

Level:: UI-ERROR
Short Syntax:: IPX.047 SAP query snd dsc, nt network ID , rsn reason_code
Long Syntax:: IPX.047 SAP Query send discarded, net network ID , reason reason_code
Description:: An outgoing SAP query packet was not successfully transmitted for the reason indicated by the error code.
Cause:: Miscellaneous handler error. (Reason code 1.)
Action:: Check for error messages from the handler for network ID.
Cause:: Output queue overflow, or other flow control. (Reason code 2.)
Action:: Alleviate congestion.
Cause:: The network is down. (Reason code 3.)
Action:: See why the handler thinks the network is down.
Cause:: The handler dropped the packet to avoid looping, or bad broadcast. (Reason code 4.)
Action:: Check your configuration.
Cause:: The host is down. (Reason code 5.)
Action:: See why the handler thinks the host is down.

IPX.048

Level:: UI-ERROR
Short Syntax:: IPX.048 SAP resp snd dsc, nt network ID , rsn reason_code
Long Syntax:: IPX.048 SAP Response send discarded, net network ID , reason reason_code
Description:: An outgoing SAP response packet was not successfully transmitted for the reason indicated by the error code.
Cause:: Miscellaneous handler error. (Reason code 1.)
Action:: Check for error messages from the handler for network ID.
Cause:: Output queue overflow, or other flow control. (Reason code 2.)
Action:: Alleviate congestion.
Cause:: The network is down. (Reason code 3.)
Action:: See why the handler thinks the network is down.
Cause:: The handler dropped the packet to avoid looping, or bad broadcast. (Reason code 4.)
Action:: Check your configuration.
Cause:: The host is down. (Reason code 5.)
Action:: See why the handler thinks the host is down.

IPX.049

Level:: U-TRACE
Short Syntax:: IPX.049 SAP no serv typ service_type for source_net / source_node , nt network ID
Long Syntax:: IPX.049 SAP no server of type service_type for Query from source_net / source_node , net network ID
Description:: A SAP Nearest Service Query was received from source_net/source_node, but the SAP database has no service registered of the desired service_type. No response will be sent.
Cause:: Service of desired service_type is down or unreachable.
Action:: Find out why serveice is down or unreachable.
Cause:: Workstation looking for non-existent service_type.
Action:: Correct query on workstation.

IPX.050

Level:: U-INFO
Short Syntax:: IPX.050 SAP dead serv typ service_type nm [ service_name ] from via_net / via_node , nt network ID
Long Syntax:: IPX.050 SAP dead service route to service type service_type name [ service_name ] reported by via_net / via_node has become unreachable, net network ID
Description:: This message is generated when a previously reachable service becomes unreachable, and is marked as Dead in the SAP table. The specified via_net/via_node is the server or router that announced the service as being unreachable.
Cause:: Server administratively disabled, as with :DOWN command.
Action:: None.
Cause:: Server crashed.
Action:: Find out why server crashed.
Cause:: Network on which service is provided has become unreachable.
Action:: Use IPX console DUMP command to see if network is reachable.

IPX.051

Level:: U-INFO
Short Syntax:: IPX.051 RIP route died to network from router_net / router_node
Long Syntax:: IPX.051 RIP route died to network network from router router_net / router_node
Description:: This message is generated when a previously reachable network becomes unreachable, and is marked as Dead in the RIP table. The specified router_net/router_node is the router that announced the network as being unreachable.
Cause:: Remote network, or intervening network, went down.
Action:: Find out why remote network went down.
Cause:: Network is on router that went down.
Action:: Find out why remote router went down.
Cause:: Network is connected via File Server that was administratively taken down.

IPX.052

Level:: UE-ERROR
Short Syntax:: IPX.052 RIP resp frm wrong net source_net / source_node not local_net , nt network ID
Long Syntax:: IPX.052 RIP response from wrong network source_net / source_node not local network local_net , nt network ID
Description:: This message is generated when a RIP response packet is received with a source network number that is not the same as the network number of this interface. The packet will be ignored.
Cause:: Misconfiguration of router on this network.
Action:: Correct configuration.

IPX.053

Level:: UE-ERROR
Short Syntax:: IPX.053 SAP resp frm wrong net source_net / source_node not local_net , nt network ID
Long Syntax:: IPX.053 SAP response from wrong network source_net / source_node not local network local_net , nt network ID
Description:: This message is generated when a SAP response packet is received with a source network number that is not the same as the network number of this interface. The packet will be ignored.
Cause:: Misconfiguration of router on this network.
Action:: Correct configuration.

IPX.054

Level:: C-INFO
Short Syntax:: IPX.054 SAP serv typ service_type nm [ service_name ] now via via_net / via_node , hop_count hops, nt network ID
Long Syntax:: IPX.054 SAP service route to service type service_type name [ service_name ] is now via via_net / via_node , hop_count hops, net network ID
Description:: This message is generated when the route to a service in the SAP table changes. The specified via_net/via_node is the new route to this service, with the noted number of hops.
Cause:: Newly reachable service (if proceeded by IPX.045).
Cause:: Change in network topology causes best route to a service to change. This can happen when new networks come up, or go down.
Action:: Determine what changes in network topology occurred.

IPX.055

Level:: U-INFO
Short Syntax:: IPX.055 new RIP net network via router_net / router_node , hop_count hops
Long Syntax:: IPX.055 New RIP network number network via router_net / router_node , hop_count hops
Description:: A new route had been added to the routing table routing table. The new network was advertised by router_net/router_node, which is now the route to this network, with the noted number of hops.

IPX.056

Level:: U-TRACE
Short Syntax:: IPX.056 RIP route to network garbage coll
Long Syntax:: IPX.056 RIP route to network garbage collected
Description:: This message is generated when a network is removed from the RIP routing table because no routing updates have been heard for it in 300 seconds. This normally happens 60 seconds after an IPX.012 message on the same service.
Cause:: Intervening router that was advertising this network went down.

IPX.057

Level:: U-INFO
Short Syntax:: IPX.057 SAP del typ service_type nm [ service_name ], nt network ID down
Long Syntax:: IPX.057 SAP deleted type service_type name [ service_name ], network network ID down
Description:: The specified network interface has gone down, and this SAP service having a first hop on that network will be placed in the dead state. It will be advertised as unreachable for another 60 seconds, and then removed from the SAP table. However, if there are alternate routes to the same service, they will be learned about within 60 seconds.
Cause:: The network via which we reached this service went down.
Action:: Bring up network.

IPX.058

Level:: U-TRACE
Short Syntax:: IPX.058 SAP typ service_type nm [ service_name ] garbage coll
Long Syntax:: IPX.058 SAP type service_type name [ service_name ] garbage collected
Description:: This message is generated when a network is removed from the SAP routing table because no SAP responses have been heard for it in 300 seconds.
Cause:: Intervening router that was advertising this service went down.

IPX.059

Level:: CE-ERROR
Short Syntax:: IPX.059 SAP unreach serv typ service_type nm [ service_name ] at service_net / service_node from via_net / via_node , nt network ID
Long Syntax:: IPX.059 SAP unreachable service type service_type name [ service_name ] at service_net / service_node from via_net / via_node , net network ID
Description:: This message is generated when an advertisement for a service is received, but that service in on an IPX network (service_net) that this router has no route to. This advertisement will be ignored.
Cause:: Configuration error on node service_net/service_node.
Action:: Correct configuration error.
Cause:: Service information for some new service has propogated faster than the associated routing information.
Action:: None needed if service_net becomes reachable shortly, and this message does not repeat.

IPX.060

Level:: C-TRACE
Short Syntax:: IPX.060 SAP periodic GSR starting
Long Syntax:: IPX.060 SAP periodic General Service Response starting
Description:: The SAP protocol is beginning the transmission of SAP General Service Response packets on all IPX interfaces. This happens approximately every 60 seconds. It will generally be followed by IPX.064 messages (if there are any services), followed by an IPX.061 message.

IPX.061

Level:: C-TRACE
Short Syntax:: IPX.061 SAP periodic GSR completed, packet_count pkts
Long Syntax:: IPX.061 SAP periodic General Service Response completed, packet_count packet
Description:: The SAP protocol has completed the transmission of the periodic SAP General Service Response packets on all IPX interfaces. In doing this, it attempted to send packet_count packets in total.

IPX.062

Level:: UI-ERROR
Class:: OOM
Short Syntax:: IPX.062 No mem for SAP periodic GSR pkt packet_number , delaying, nt network ID
Long Syntax:: IPX.062 No memory for SAP periodic General Service Response packet packet_number , delaying, network network ID
Description:: There was no packet buffer available to send one packet of the periodic SAP General Service Response. The response will stall for half a second, waiting for a buffer to become available. The packet_number is the count of this packet within the complete response, starting at 0.
Cause:: Temporary packet buffer shortage due to traffic peak.
Action:: See if message recurs after half a second.
Cause:: Parmanent buffer shortage.
Action:: Take dump of router and contact customer service.

IPX.063

Level:: UI-ERROR
Short Syntax:: IPX.063 SAP periodic GSR snd dsc, nt network ID , rsn reason_code
Long Syntax:: IPX.063 SAP periodic General Service Response send discarded, net network ID , reason reason_code
Description:: An outgoing SAP periodic General Service Response packet was not successfully transmitted for the reason indicated by the error code. General Service Response for the reason the error code indicates.
Cause:: Miscellaneous handler error. (Reason code 1.)
Action:: Check for error messages from the handler for network ID.
Cause:: Output queue overflow, or other flow control. (Reason code 2.)
Action:: Alleviate congestion.
Cause:: The network is down. (Reason code 3.)
Action:: See why the handler thinks the network is down.
Cause:: The handler dropped the packet to avoid looping, or bad broadcast. (Reason code 4.)
Action:: Check your configuration.
Cause:: The host is down. (Reason code 5.)
Action:: See why the handler thinks the host is down.

IPX.064

Level:: P-TRACE
Short Syntax:: IPX.064 SAP periodic GSR sent, entry_count entries, nt network ID
Long Syntax:: IPX.064 SAP periodic General Service Reply sent, entry_count entries, net network ID
Description:: A SAP periodic General Service Reply packet has just been sent on the specified network. There were entry_count services in this packet.

IPX.065

Level:: U-INFO
Short Syntax:: IPX.065 routing cache cleared
Long Syntax:: IPX.065 routing cache cleared
Description:: The IPX routing cache has been cleared, probably as the result of a routing table change.

IPX.066

Level:: U-INFO
Short Syntax:: IPX.066 routing cache garbage collecting...
Long Syntax:: IPX.066 routing cache garbage collecting...
Description:: The IPX routing cache is collecting nonsense data. This takes several passes, and is only done when the cache starts overflowing.

IPX.067

Level:: U-INFO
Short Syntax:: IPX.067 cache entry dest_net / dest_node cleared
Long Syntax:: IPX.067 routing cache entry for destination dest_net / dest_node cleared
Description:: The IPX routing cache entry for the listed destination has been cleared.

IPX.068

Level:: UI-ERROR
Short Syntax:: IPX.068 no memory left for IPX local network/node cache entries
Long Syntax:: IPX.068 no memory left for IPX local network/node cache entries
Description:: The IPX routing local network/node cache needs memory before it can add a new local network and its table into the IPX cache.

IPX.069

Level:: UI-ERROR
Short Syntax:: IPX.069 protocol tbl ovrfl, dst destination_net
Long Syntax:: IPX.069 protocol Table overflow, destination destination_net
Description:: This message is generated when a new alternate entry cannot be made to routing table because alternate entry space is already full.
Cause:: Alternate entry routing table too small.
Action:: Increase alternate routing entries for this protocol.

IPX.070

Level:: UI-ERROR
Short Syntax:: IPX.070 rte ovrfl, dst destination_net
Long Syntax:: IPX.070 route overflow, destination destination_net
Description:: This message is generated when a new alternate entry cannot be made to routing table because alternate entry space for a given route is already full.
Cause:: Maximum routes per destination network is too small.
Action:: Increase maximum routing entries per destination network for this protocol.

IPX.071

Level:: U-INFO
Short Syntax:: IPX.071 drop pkt w/ encap_seen using encap_used int intnum
Long Syntax:: IPX.071 dropped pkt with encaps encap_seen using encap_used on interface intnum
Description:: This message is generated when an IPX packet is received with an encapsulation other than that which has been selected for this interface.
Cause:: Normal for networks using multiple encapsulations on a single wire.
Action:: None needed.

IPX.072

Level:: UI-ERROR
Short Syntax:: IPX.072 Error building IPXWAN iw_pkttype on net network ID
Long Syntax:: IPX.072 Error building IPXWAN iw_pkttype on network network ID
Description:: An IPXWAN Response is built from a Request. An attempt has been made to build the response without a request.

IPX.073

Level:: UI-ERROR
Short Syntax:: IPX.073 Name and Node ID must be config'd before IPXWAN can operate
Long Syntax:: IPX.073 Router name and Node ID must be configured before IPXWAN can operate
Description:: The IPX configuration parameters Name and Node ID must be configured before IPXWAN can operate on any network.

IPX.074

Level:: UI-ERROR
Short Syntax:: IPX.074 IPXWAN can't operate on net network ID - unsupported type
Long Syntax:: IPX.074 IPXWAN can't operate on network network ID because it's an unsupported type
Description:: IPXWAN has been configured to run on an unsupported interface type.

IPX.075

Level:: U-INFO
Short Syntax:: IPX.075 IPXWAN is configured but not enabled on net network ID
Long Syntax:: IPX.075 IPXWAN is configured but not enabled to run on network network ID
Description:: IPXWAN has been configured to run on the interface, but it has been disabled by the user.

IPX.076

Level:: UE-ERROR
Short Syntax:: IPX.076 IPXWAN iw_pkttype pkt dropped, rcv'd on net network ID , unsupported int type
Long Syntax:: IPX.076 IPXWAN iw_pkttype packet dropeed because it was received on an unsupported interface type, network network ID
Description:: An IPXWAN packet was dropped because it was received on an unsupported interface type.

IPX.077

Level:: UI-ERROR
Short Syntax:: IPX.077 IPXWAN iw_pkttype pkt dropped, rcv'd on disabled net network ID
Long Syntax:: IPX.077 IPXWAN iw_pkttype packet dropped - it was received on network network ID which is disabled for IPXWAN traffic
Description:: An IPXWAN packet was dropped because it was received on an interface which is configured to be disabled for IPXWAN traffic.

IPX.078

Level:: UE-ERROR
Short Syntax:: IPX.078 IPXWAN iw_pkttype pkt rejected on net network ID , confidence id check failed
Long Syntax:: IPX.078 IPXWAN iw_pkttype packet received on network network ID was rejected due to the confidence ID check failing
Description:: An IPXWAN packet was rejected because the confidence ID check failed.

IPX.079

Level:: UI-ERROR
Short Syntax:: IPX.079 IPXWAN iw_pkttype pkt rejected on net network ID , non-unique node id
Long Syntax:: IPX.079 IPXWAN iw_pkttype packet received on network network ID was rejected because its node id is identical to the local node id
Description:: An IPXWAN packet was rejected because the node id reported in it was identical to the local node id.
Action:: Reconfigure the local IPX node id with a unique value.

IPX.080

Level:: UI-ERROR
Short Syntax:: IPX.080 No memory to build IPXWAN packet
Long Syntax:: IPX.080 Not able to get a buffer to build an IPXWAN packet
Description:: An attempt to get a buffer to build an IPXWAN packet failed.

IPX.081

Level:: UI-ERROR
Short Syntax:: IPX.081 Failed to send an IPXWAN iw_pkttype pkt on net network ID
Long Syntax:: IPX.081 An attempt to send an IPXWAN iw_pkttype packet on network network ID failed
Description:: An attempt to send an IPXWAN packet failed.

IPX.082

Level:: UI-ERROR
Short Syntax:: IPX.082 IPXWAN iw_pkttype, pkt rejected on net network ID , seq num mismatch
Long Syntax:: IPX.082 IPXWAN iw_pkttype, packet received on network network ID was rejected due to a sequence number mismatch
Description:: An IPXWAN packet was dropped due to a sequence number mismatch.

IPX.083

Level:: UE-ERROR
Short Syntax:: IPX.083 IPXWAN iw_pkttype rejected on net network ID - opt_type opt not accepted
Long Syntax:: IPX.083 IPXWNA iw_pkttype rejected on network network ID - opt_type option not accepted
Description:: An IPXWAN packet was rejected because an option was not accepted by the other side of the link.

IPX.084

Level:: U-INFO
Short Syntax:: IPX.084 IPXWAN connection to be retried on net network ID
Long Syntax:: IPX.084 IPXWAN connection to be retried on network network ID
Description:: A previously timed-out IPXWAN connection is to be retried.

IPX.085

Level:: U-INFO
Short Syntax:: IPX.085 IPXWAN connection on net network ID timed-out
Long Syntax:: IPX.085 IPXWAN connection on network network ID timed-out
Description:: An IPXWAN connection attempt timed-out.

IPX.086

Level:: C-INFO
Short Syntax:: IPX.086 IPXWAN iw_pkttype pkt rcvd on net network ID
Long Syntax:: IPX.086 IPXWAN iw_pkttype packet received on network network ID
Description:: An IPXWAN packet was successfully received, accepted, and processed.

IPX.087

Level:: C-INFO
Short Syntax:: IPX.087 IPXWAN iw_pkttype pkt sent on net network ID
Long Syntax:: IPX.087 IPXWAN iw_pkttype packet sent on network network ID
Description:: An IPXWAN packet was successfully sent on the network.

IPX.088

Level:: C-INFO
Short Syntax:: IPX.088 IPXWAN connection up on net network ID
Long Syntax:: IPX.088 IPXWAN connection has come up on network network ID
Description:: An IPXWAN connection is up on the given network.

IPX.089

Level:: U-INFO
Short Syntax:: IPX.089 IPXWAN connection down on net network ID
Long Syntax:: IPX.089 IPXWAN connection has gone down on network network ID
Description:: An IPXWAN connection has gone down the given network. This can happen if the link goes down, if the protocol goes down on the link (IPXCP goes down) or if a Timer Request packet is received.

IPX.090

Level:: U-TRACE
Short Syntax:: IPX.090 SAP no server reply required for typ service_type for source_net / source_node , nt network ID
Long Syntax:: IPX.090 SAP no server reply required for type service_type for Query from source_net / source_node , net network ID
Description:: The router received a SAP Nearest Service Query from source_net/source_node. The SAP database indicates that a server exists on the same network as the client. The server will be allowed to respond for itself.
Cause:: There is an eligible server on the client's network that is capable of replying for itself.
Action:: No action is required.

IPX.091

Level:: UI-ERROR
Short Syntax:: IPX.091 short NB frm source_net / source_node nt network ID , ign
Long Syntax:: IPX.091 short NETBIOS frame from source_net / source_node net network ID , ignored
Description:: A NETBIOS type 20 packet must be at least 62 bytes in length. It will be dropped.
Cause:: Unknown.
Action:: None. Fix Novell application sending the packet.

IPX.092

Level:: U-INFO
Short Syntax:: IPX.092 Add kpalv proxy source_net / source_node . source_socket <-> dest_net / dest_node . dest_socket
Long Syntax:: IPX.092 Add KeepAlive proxy connection source_net / source_node . source_socket <-> dest_net / dest_node . dest_socket
Description:: A new pair of stations has been added to the proxy keepalive table.

IPX.093

Level:: U-INFO
Short Syntax:: IPX.093 Del kpalv proxy source_net / source_node . source_socket <-> dest_net / dest_node . dest_socket
Long Syntax:: IPX.093 Delete KeepAlive proxy connection source_net / source_node . source_socket <-> dest_net / dest_node . dest_socket
Description:: A pair of stations has been removed from the proxy keepalive table.

IPX.094

Level:: UI-ERROR
Short Syntax:: IPX.094 no memory for IPX kpalv proxy tbl
Long Syntax:: IPX.094 no memory for IPX KeepAlive Proxy connection table
Description:: The IPX Keepalive Proxy initialization routine was unable to allocate memory for its connection table. (IPX KeepAlive Proxy feature will not be enabled.)

IPX.095

Level:: U-INFO
Short Syntax:: IPX.095 Serial pkt dropped source_net / source_node -> dest_net / dest_node , nt network ID
Long Syntax:: IPX.095 Serial packet dropped source_net / source_node -> dest_net / dest_node , net network ID
Description:: The router dropped a Serialization packet because the output network interface has IPX KeepAlive filtering enabled.

IPX.096

Level:: UI-ERROR
Class:: OOM
Short Syntax:: IPX.096 No mem fr prxy kpalv req/rsp
Long Syntax:: IPX.096 No memory for proxy keepalive request or response
Description:: No buffer is available to send an IPX keepalive message.

IPX.097

Level:: U-INFO
Short Syntax:: IPX.097 Proxy kpalv type source_net / source_node . source_socket -> dest_net / dest_node . dest_socket
Long Syntax:: IPX.097 Sent proxy keepalive type source_net / source_node . source_socket -> dest_net / dest_node . dest_socket
Description:: The router sent a proxy keepalive packet.

IPX.098

Level:: P-TRACE
Short Syntax:: IPX.098 RIP RTR flt PASS pkt frm source_net / source_node , nt network ID
Long Syntax:: IPX.098 RIP Router filter PASS packet from source_net / source_node , net network ID
Description:: A RIP packet has successfully PASSED through the RIP router filter on the given interface. The RIP router filter is based upon the source_node in the IPX packet header, which is displayed by the message.

IPX.099

Level:: P-TRACE
Short Syntax:: IPX.099 RIP RTR flt DROP pkt frm source_net / source_node , nt network ID
Long Syntax:: IPX.099 RIP Router filter DROP packet from source_net / source_node , net network ID
Description:: A RIP packet has been DROPPED by the RIP router filter on the given interface. The RIP router filter is based upon the source_node in the IPX packet header, which is displayed by the message.

IPX.100

Level:: P-TRACE
Short Syntax:: IPX.100 RIP iodir flt PASS IPX net ipx_network , nt network ID
Long Syntax:: IPX.100 RIP iodir filter PASS IPX network number ipx_network , net network ID
Description:: A RIP routing information entry for the given IPX network number has successfully PASSED through the RIP filter on the given interface in the stated filtering direction, which is either inbound or outbound.

IPX.101

Level:: P-TRACE
Short Syntax:: IPX.101 RIP iodir flt DROP net ipx_network , nt network ID
Long Syntax:: IPX.101 RIP iodir filter DROP network ipx_network , net network ID
Description:: A RIP routing information entry for the given IPX network number has been DROPPED by the RIP filter on the given interface in the stated filtering direction, which is either inbound or outbound.

IPX.102

Level:: P-TRACE
Short Syntax:: IPX.102 SAP iodir flt PASS typ service_type nm [ service_name ], service_hops hops, nt network ID
Long Syntax:: IPX.102 SAP iodir filter PASS type service_type name [ service_name ], hops service_hops , net network ID
Description:: A SAP routing information entry for the given IPX network number has successfully PASSED through the SAP filter on the given interface in the stated filtering direction, which is either inbound or outbound.

IPX.103

Level:: P-TRACE
Short Syntax:: IPX.103 SAP iodir flt DROP typ service_type nm [ service_name ], service_hops hops, nt network ID
Long Syntax:: IPX.103 SAP iodir filter DROP type service_type name [ service_name ], hops service_hops , net network ID
Description:: A SAP routing information entry for the given IPX network number has been DROPPED by the SAP filter on the given interface in the stated filtering direction, which is either inbound or outbound.

IPX.104

Level:: P-TRACE
Short Syntax:: IPX.104 IPX iodir flt PASS typ packet_type source_net / source_node . source_socket -> dest_net / dest_node . dest_socket , service_hops hops, nt network ID
Long Syntax:: IPX.104 IPX iodir filter PASS type packet_type , source_net / source_node . source_socket -> dest_net / dest_node . dest_socket , hops service_hops , net network ID
Description:: An IPX packet has PASSED through the IPX filter on the given interface in the stated filtering direction, which is either inbound or outbound.

IPX.105

Level:: P-TRACE
Short Syntax:: IPX.105 IPX iodir flt DROP typ packet_type source_net / source_node . source_socket -> dest_net / dest_node . dest_socket , service_hops hops, nt network ID
Long Syntax:: IPX.105 IPX iodir filter DROP type packet_type , source_net / source_node . source_socket -> dest_net / dest_node . dest_socket , hops service_hops , net network ID
Description:: An IPX packet has been DROPPED by the IPX filter on the given interface in the stated filtering direction, which is either inbound or outbound.

IPX.106

Level:: UI-ERROR
Short Syntax:: IPX.106 reserved for possible growth by releases before 16.2
Long Syntax:: IPX.106 reserved for possible growth by releases before 16.2
Description:: this message is not defunct, room is being left for message growth

IPX.107

Level:: UI-ERROR
Short Syntax:: IPX.107 reserved for possible growth by releases before 16.2
Long Syntax:: IPX.107 reserved for possible growth by releases before 16.2
Description:: this message is not defunct, room is being left for message growth

IPX.108

Level:: UI-ERROR
Short Syntax:: IPX.108 SAP query snd fld, rsn= reason_code , IPX circuit ID AP query send failed, reason=%d, %S
Long Syntax:: IPX.108 SAP query send failed, reason= reason_code , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A request to send a SAP query packet was rejected and failed due to the indicated reason.
Cause:: Miscellaneous handler error. (Reason code 1.)
Action:: Check for error messages from handler for network_name.
Cause:: Output queue overflow, or other flow control. (Reason code 2.)
Action:: Alleviate congestion.
Cause:: Network down. (Reason code 3.)
Action:: See why handler thinks network is down.
Cause:: Dropped by handler to avoid looping, or bad broadcast. (Reason code 4.)
Action:: Check configuration.
Cause:: Host down. (Reason code 5.)
Action:: See why handler thinks host is down.

IPX.109

Level:: C-INFO
Short Syntax:: IPX.109 Periodic SAP done: sap_count entries in packet_count pkts, IPX circuit ID eriodic SAP done: %d entries in %d pkts, %S
Long Syntax:: IPX.109 Periodic SAP done: sap_count entries in packet_count pkts, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: The periodic SAP broadcast for this circuit has just completed. The number of SAP entries advertised and packets sent is given.

IPX.110

Level:: C-INFO
Short Syntax:: IPX.110 Delta SAP done: sap_count entries in packet_count pkts, IPX circuit ID elta SAP done: %d entries in %d pkts, %S
Long Syntax:: IPX.110 Delta SAP done: sap_count entries in packet_count pkts, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A delta SAP broadcast for this circuit has just completed. The number of SAP entries advertised and packets sent is given.

IPX.111

Level:: C-INFO
Short Syntax:: IPX.111 Gen Req SAP done: sap_count entries in packet_count pkts, IPX circuit ID eneral Request SAP done: %d entries in %d pkts, %S
Long Syntax:: IPX.111 General Request SAP done: sap_count entries in packet_count pkts, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP response to a general request on this circuit has just completed. The number of SAP entries and packets sent is given.

IPX.112

Level:: U-INFO
Short Syntax:: IPX.112 SAP aged out: typ service_type nm [ service_name ], path router_node on IPX circuit ID AP aged out: type %x name [%.48S], path %E on %S
Long Syntax:: IPX.112 SAP aged out: type service_type name [ service_name ], path router_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A path for a SAP table entry has aged out. The path was from the given router node on the given circuit. The age out time on the circuit is the SAP update interval time multiplied by the SAP multiplier.
Cause:: No SAP response packet from the router_node on the circuit has refreshed the SAP table entry for the age out time.
Action:: None, if the SAP is really unreachable from this router. If the SAP is really reachable, then an network analysis has to be done to determine why the SAP response packets are not getting through to refresh the SAP entry. SAP update intervals and SAP multipliers are adjustable if the situation is only a matter of allowing more retries.

IPX.113

Level:: U-INFO
Short Syntax:: IPX.113 SAP down: typ service_type nm [ service_name ], from router_node on IPX circuit ID AP down: type %x name [%.48S], from %E on %S
Long Syntax:: IPX.113 SAP down: type service_type name [ service_name ], from router_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP has been reported as unreachable by the given next-hop router on the circuit.
Cause:: A Server went down.
Action:: None.
Cause:: The network upon which the server resides may no longer be reachable.
Action:: Determine why the network is unreachable.

IPX.114

Level:: C-TRACE
Short Syntax:: IPX.114 circ down: typ service_type nm [ service_name ], path router_node on IPX circuit ID irc down: type %x name [%.48S], path %E on %S
Long Syntax:: IPX.114 circ down: type service_type name [ service_name ], path router_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP table entry, for the given SAP type and name, is no longer reachable because the underlying circuit of the the next hop router supplying the SAP information has gone down. The next hop router's IPX node and circuit are displayed.

IPX.115

Level:: C-TRACE
Short Syntax:: IPX.115 SAP unreach, SAP's net ipx_network unreach service_type nm [ service_name ]
Long Syntax:: IPX.115 SAP unreach, SAP's network ipx_network unreachable, type service_type name [ service_name ]
Description:: This SAP is considered unreachable because the Novell network location of this SAP is no longer reachable from this router.
Cause:: The Novell network, upon which the SAP resides, is no longer reachable.
Action:: Determine why the network became unreachable.

IPX.116

Level:: UE-ERROR
Short Syntax:: IPX.116 bad SAP opc SAP_opcode from src_ipx_node , IPX circuit ID ad SAP opcode %x from %E, %S
Long Syntax:: IPX.116 bad SAP opcode SAP_opcode from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP packet was received with an opcode that this router does not support. The packet is discarded.

IPX.117

Level:: C-TRACE
Short Syntax:: IPX.117 SAP gen qry from src_ipx_node , IPX circuit ID AP general query from %E, %S
Long Syntax:: IPX.117 SAP general query from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP General Service Query has been received and is about to be processed. If appropriate, this router will answer the query.

IPX.118

Level:: C-TRACE
Short Syntax:: IPX.118 SAP gen rsp from src_ipx_node , IPX circuit ID AP general response from %E, %S
Long Syntax:: IPX.118 SAP general response from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP General Service Response has been received and is about to be processed. The data in the packet will be used to update the SAP database in the router.

IPX.119

Level:: C-TRACE
Short Syntax:: IPX.119 SAP GNS for typ sap_type from src_ipx_node , IPX circuit ID AP Get Nearest Service for type %x from %E, %S
Long Syntax:: IPX.119 SAP Get Nearest Service for type sap_type from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP Nearest Service Query packet has been received and is about to be processed. If appropriate, this router will answer the query.

IPX.120

Level:: UE-ERROR
Short Syntax:: IPX.120 SAP GNS bad len from src_ipx_node , IPX circuit ID AP Get Nearest Service with bad length from %E, %S
Long Syntax:: IPX.120 SAP Get Nearest Service with bad length from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP Get Nearest Service Query packet was received with an illegal length. The packet is discarded.

IPX.121

Level:: U-TRACE
Short Syntax:: IPX.121 SAP GNS qry frm src_ipx_node ign, IPX circuit ID AP Get Nearest Service Query from %E ignored, %S
Long Syntax:: IPX.121 SAP Get Nearest Service Query from src_ipx_node ignored, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP Get Nearest Service Query was received, but but ignored because the replay to get nearest server has been disabed.
Cause:: Configuration.

IPX.122

Level:: U-TRACE
Short Syntax:: IPX.122 SAP GNS no match, typ= sap_type , from src_ipx_node , IPX circuit ID AP GNS no match, type=%x, from %X, %S
Long Syntax:: IPX.122 SAP GNS no match, type= sap_type , from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP Get Nearest Service Query was received, but no match was found in the SAP database. No response will be sent.
Cause:: Service is unreachable through this router.

IPX.123

Level:: U-TRACE
Short Syntax:: IPX.123 SAP GNS, service on net, typ= sap_type , from src_ipx_node , IPX circuit ID AP GNS, service on net, type=%x, from %X, %S
Long Syntax:: IPX.123 SAP GNS, service on net, type= sap_type , from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP Get Nearest Service Query was received, but the closest match shows that the service is on the same network as the client. The service, according to Novell, must answer for itself. No response will be sent.

IPX.124

Level:: UE-ERROR
Short Syntax:: IPX.124 SAP gen req bad len from src_ipx_node , IPX circuit ID AP general request with bad length from %E, %S
Long Syntax:: IPX.124 SAP general request with bad length from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP general request was received with an illegal length. The packet is discarded.

IPX.125

Level:: UE-ERROR
Short Syntax:: IPX.125 SAP gen req, no mem, from src_ipx_node , IPX circuit ID AP general request, no mem, from %E, %S
Long Syntax:: IPX.125 SAP general request, no mem, from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP general request was received, but the router did not have memory resources to respond. The packet is discarded.

IPX.126

Level:: CE-ERROR
Short Syntax:: IPX.126 SAP tbl, net ipx_network unreach, typ= service_type nm=[ service_name ]
Long Syntax:: IPX.126 SAP tbl, network ipx_network unreachable, type= service_type name=[ service_name ]
Description:: A SAP table entry was going to be made, but was disallowed because the IPX network location of the SAP is not reachable by this router.
Cause:: Configuration error on node service_net/service_node.
Action:: Correct configuration error.
Cause:: Service information for some new service has propogated faster than the associated routing information.
Action:: None needed if service_net becomes reachable shortly, and this message does not repeat.

IPX.127

Level:: UI-ERROR
Short Syntax:: IPX.127 SAP tbl, no mem, typ= service_type nm=[ service_name ]
Long Syntax:: IPX.127 SAP table, no mem, type service_type name [ service_name ]
Description:: A new entry cannot be added to the SAP table because a new SAP table entry can not be allocated. The new entry is discarded.
Cause:: SAP table too small or not enough memory.
Action:: Pre-allocate more table entries or increase memory.

IPX.128

Level:: U-INFO
Short Syntax:: IPX.128 SAP srv: typ= service_type nm=[ service_name ], hop_count hops, from via_node , IPX circuit ID AP service: type=%x name=[%.48S], %d hops, from %E, %S
Long Syntax:: IPX.128 SAP service: type= service_type name=[ service_name ], hop_count hops, from via_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A new service has been added to the service table. It was learned by the SAP protocol. Sap type, sap name, hops are given. Source ipx_node and circuit are the SAP information is given.
Cause:: New service started on IPX internetwork.
Cause:: Existing service becomes reachable, due to change in network connectivity.

IPX.129

Level:: U-INFO
Short Syntax:: IPX.129 SAP tbl, chg, typ= service_type nm=[ service_name ], hop_count hops, from via_node , IPX circuit ID AP tbl, chg, type=%x name=[%.48S], %d hops, from %E, %S
Long Syntax:: IPX.129 SAP tbl, chg, type= service_type name=[ service_name ], hop_count hops, from via_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP table entry, for the given SAP type and name, has changed in the number of hops to reach the service. The IPX node address and circuit location of the next hop router, from which this new service information has been learned, are given.
Cause:: Network connectivity has changed, changing the reachablity information of the service.

IPX.130

Level:: UE-ERROR
Short Syntax:: IPX.130 RIP/SAP hops > 16 from src_ipx_node , IPX circuit ID IP/SAP hops > 16 from %E, %S
Long Syntax:: IPX.130 RIP/SAP hops > 16 from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP or SAP packet had a hop count greater than 16. The packet is discarded.

IPX.131

Level:: UI-ERROR
Short Syntax:: IPX.131 SAP rsp snd fld, rsn= reason_code , IPX circuit ID AP response send failed, reason=%d, %S
Long Syntax:: IPX.131 SAP response send failed, reason= reason_code , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A request to send a SAP response packet on the circuit was rejected and failed due to the indicated reason. The SAP response packet may have been part of a periodic SAP broadcast, a SAP delta broadcast, or in response to a general request. See IPX.108 for detail on failure reason codes.

IPX.132

Level:: P-TRACE
Short Syntax:: IPX.132 SAP rsp snt, for periodic, entry_count entries, IPX circuit ID AP rsp snt, for periodic, %u entries, %S
Long Syntax:: IPX.132 SAP rsp snt, for periodic, entry_count entries, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP response packet has just been sent on the circuit. The number of SAP entries in the packet is shown. The packet was part of the periodic SAP broadcast for the circuit.

IPX.133

Level:: P-TRACE
Short Syntax:: IPX.133 SAP rsp snt, for delta, entry_count entries, IPX circuit ID AP rsp snt, for delta, %u entries, %S
Long Syntax:: IPX.133 SAP rsp snt, for delta, entry_count entries, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP response packet has just been sent on the circuit. The number of SAP entries in the packet is shown. The packet was part of a delta SAP broadcast for the circuit.

IPX.134

Level:: P-TRACE
Short Syntax:: IPX.134 SAP rsp snt, for gen req, entry_count entries, IPX circuit ID AP rsp snt, for gen req, %u entries, %S
Long Syntax:: IPX.134 SAP rsp snt, for gen req, entry_count entries, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP response packet has just been sent on the circuit. The number of SAP entries in the packet is shown. The packet was part of a response to a SAP general request.

IPX.135

Level:: UE-ERROR
Short Syntax:: IPX.135 SAP rsp frm src_ipx_node , mismatch net src_ipx_network , IPX circuit ID AP response from %E, mismatched network number %X, %S
Long Syntax:: IPX.135 SAP response from src_ipx_node , mismatched network number src_ipx_network , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP response packet was received with a source network number that is not the same as the network number as this circuit. The packet is discarded.
Cause:: Misconfiguration of the IPX network number.
Action:: Correct configuration so that the IPX network number matches among all routers and servers on the circuit.

IPX.136

Level:: P-TRACE
Short Syntax:: IPX.136 SAP rsp frm src_ipx_node , SAP off, IPX circuit ID AP response from %E, SAP off, %S
Long Syntax:: IPX.136 SAP response from src_ipx_node , SAP off, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: SAP is off. A SAP response packet, received the specified node, has information about a SAP not on this immediate network. The information about any SAP not on this immediate network is ignored if SAP is OFF for the circuit.
Cause:: SAP is off because either it has been configured to be OFF or SAP has been negotiated to be OFF on this IPXWAN circuit.
Action:: None, unless this SAP information is important. Otherwise, you may want to change SAP from OFF to ON or AUTOMATIC mode for this circuit, or alternatively, upgrade the node sending this SAP information to use NLSP instead of SAP.

IPX.137

Level:: C-TRACE
Short Syntax:: IPX.137 SAP GNS rpy: typ service_type nm [ service_name ] to ipx_node , IPX circuit ID AP Get Nearest Server reply of type %x name [%.48S] to %E, %S
Long Syntax:: IPX.137 SAP Get Nearest Server reply of type service_type name [ service_name ] to ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP Get Nearest Service Reply will be sent to the specified node. The service_type and service name are shown.
Cause:: An IPX node sent a Get Nearest Server Request, and this router is replying with this specific service.

IPX.138

Level:: U-TRACE
Short Syntax:: IPX.138 SAP qry snt, IPX circuit ID AP general service query sent, %S
Long Syntax:: IPX.138 SAP general service query sent, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP General Service Query is sent on the circuit to ask for SAP information when the IPX circuit comes up.

IPX.139

Level:: C-TRACE
Short Syntax:: IPX.139 SAP tbl: del, typ= service_type nm=[ service_name ]
Long Syntax:: IPX.139 SAP tbl: del, type= service_type name=[ service_name ]
Description:: This message is generated when the SAP entry, for the given SAP type and name, is completely removed from the SAP routing table.

IPX.140

Level:: P-TRACE
Short Syntax:: IPX.140 NB brd source_net / source_node -> dest_net / dest_node , hop_count hops, IPX circuit ID ETBIOS broadcast %X/%E -> %X/%E, %d hops, %S
Long Syntax:: IPX.140 NETBIOS broadcast source_net / source_node -> dest_net / dest_node , hop_count hops, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A NetBIOS type 20 propagation packet has been received successfully on the circuit shown for forwarding to other IPX circuits on the router. The hop count from the IPX header is displayed and indicates how many other routers have already forwarded this packet.

IPX.141

Level:: U-TRACE
Short Syntax:: IPX.141 NB too many hops frm source_net / source_node , IPX circuit ID ETBIOS too many hops from %X/%E, %S
Long Syntax:: IPX.141 NETBIOS too many hops from source_net / source_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A type 20 propagation packet, eg NETBIOS, has been through more than 8 routers, which is the maximum limit for this type of packet. The packet is discarded.

IPX.142

Level:: UI-ERROR
Short Syntax:: IPX.142 short NB frm source_net / source_node , IPX circuit ID hort NETBIOS frame from %X/%E, %S
Long Syntax:: IPX.142 short NETBIOS frame from source_net / source_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A NETBIOS type 20 packet must be at least 62 bytes in length. The packet is discarded.

IPX.143

Level:: C-TRACE
Short Syntax:: IPX.143 NB frm source_net / source_node , already on ipx_network , IPX circuit ID ETBIOS from %X/%E, already on %X, %S
Long Syntax:: IPX.143 NETBIOS from source_net / source_node , already on ipx_network , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: This IPX NETBIOS emulation broadcast packet has already been on one of the directly attached networks. The packet is discarded
Cause:: This is normal; otherwise, a forwarding loop would occur.

IPX.144

Level:: UI-ERROR
Short Syntax:: IPX.144 NB frm source_net / source_node , no net num, IPX circuit ID ETBIOS from %X/%E, not net num, %S
Long Syntax:: IPX.144 NETBIOS from source_net / source_node , not net num, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: No network number is available to forward the NetBIOS packet. The packet is discarded.
Cause:: Possibily, a serial line network operating without a network number.
Action:: If you want to run NETBIOS emulation across a serial line network, it must have a network number or you must have an internal network number defined.

IPX.145

Level:: UI-ERROR
Short Syntax:: IPX.145 NB snd fld, rsn= reason_code , IPX circuit ID etBIOS send failed, reason=%d, %S
Long Syntax:: IPX.145 NetBIOS send failed, reason= reason_code , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A request to forward a NetBIOS packet was rejected and failed due to the indicated reason. See IPX.108 for detail on failure reason codes.

IPX.146

Level:: P-TRACE
Short Syntax:: IPX.146 fwd source_net / source_node -> dest_net / dest_node , to next_hop_node , IPX circuit ID orwarding %X/%E->%X/%E, to %X, %S
Long Syntax:: IPX.146 forwarding source_net / source_node -> dest_net / dest_node , to next_hop_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: An IPX pkt is being forward to an ipx node on the circuit. The source and destination net/node fields of the packet are shown.

IPX.147

Level:: UI-ERROR
Short Syntax:: IPX.147 pkt fwding snd fld, rsn= reason_code , IPX circuit ID acket forwardind send failed, reason=%d, %S
Long Syntax:: IPX.147 packet forwardind send failed, reason= reason_code , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A request to forward an IPX pkt was rejected and failed due to the indicated reason. See IPX.108 for detail on failure reason codes.

IPX.148

Level:: UI-ERROR
Short Syntax:: IPX.148 q ovf source_net / source_node -> dest_net / dest_node , IPX circuit ID ueue overflow, %X/%E->%X/%E, %S
Long Syntax:: IPX.148 Queue overflow, source_net / source_node -> dest_net / dest_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: IPX forwarder input queue has overflowed.
Cause:: More packets are being received than the forwarder can forward.

IPX.149

Level:: UE-ERROR
Short Syntax:: IPX.149 pkt frm src_net / src_node , too big, pkt_size > max_size , IPX circuit ID acket from %X/%E, too big, %d > %d, %S
Long Syntax:: IPX.149 packet from src_net / src_node , too big, pkt_size > max_size , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: An IPX packet is too large to send on the circuit.
Cause:: Maximum transmission units of networks may need adjustment.
Action:: MTU configuration adjustment may be needed either on the router or on the client or on the server.

IPX.150

Level:: UE-ERROR
Short Syntax:: IPX.150 short len= length , frm src_net / src_node , IPX circuit ID hort len=%u, from %X/%E, %S
Long Syntax:: IPX.150 short len= length , from src_net / src_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: An received IPX packet had a length less than the minimum 30 byte IPX header. The packet is discarded.

IPX.151

Level:: UE-ERROR
Short Syntax:: IPX.151 trunc pkt frm src_net / src_node , ipx= length phys= length , IPX circuit ID runcated packet from %X/%E; ipx=%d, physical=%d, %S
Long Syntax:: IPX.151 truncated packet from src_net / src_node ; ipx= length , physical= length , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: An received IPX packet had an IPX length greater than the physical length of the packet. The packet is discarded.

IPX.152

Level:: C-TRACE
Short Syntax:: IPX.152 src net chgd, src_net / src_node -> dest_net / dest_node , IPX circuit ID ource network changed, %X/%E->%X/%E, %S
Long Syntax:: IPX.152 source network changed, src_net / src_node -> dest_net / dest_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A received IPX packet overwrites the source net of 0 with the network's number. The source and destination values given reflect the new value.

IPX.153

Level:: UE-ERROR
Short Syntax:: IPX.153 hops exceeded, src_net / src_node -> dest_net / dest_node , IPX circuit ID ops exceeded, %X/%E->%X/%E, %S
Long Syntax:: IPX.153 hops exceeded, src_net / src_node -> dest_net / dest_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A received IPX packet was received with a hop count exceeded this router's configured maximum hops. The packet is discarded.

IPX.154

Level:: CE-ERROR
Short Syntax:: IPX.154 no rte, src_net / src_node -> dest_net / dest_node
Long Syntax:: IPX.154 no route, src_net / src_node -> dest_net / dest_node
Description:: A received IPX packet was not forwardable. The packet is discarded.

IPX.155

Level:: U-INFO
Short Syntax:: IPX.155 circ dwn: del path to nt dest_net via next_hop on IPX circuit ID irc dwn: delete path to network %X via %E on %S
Long Syntax:: IPX.155 circ dwn: delete path to network dest_net via next_hop on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: The path to an IPX network has been deleted because the first hop circuit for that path has gone down.
Cause:: circuit down.
Action:: Fix network.

IPX.156

Level:: UE-ERROR
Short Syntax:: IPX.156 bad RIP opc RIP_opcode from src_ipx_node , IPX circuit ID ad RIP opcode %x from %E, %S
Long Syntax:: IPX.156 bad RIP opcode RIP_opcode from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP packet was received with an opcode that this router does not support. The packet is discarded.

IPX.157

Level:: C-TRACE
Short Syntax:: IPX.157 Rspnd to RIP rqst frm src_ipx_node , IPX circuit ID esponding to RIP Request from %E, %S
Long Syntax:: IPX.157 Responding to RIP Request from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP query request packet has been received on the circuit and is being processed.

IPX.158

Level:: C-TRACE
Short Syntax:: IPX.158 RIP rsp frm src_ipx_node , IPX circuit ID IP response from %E, %S
Long Syntax:: IPX.158 RIP response from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP response has been received on the circuit and is being processed. The information in the packet, if appropriate, will be used to update the routing table.

IPX.159

Level:: UE-ERROR
Short Syntax:: IPX.159 RIP rsp frm src_ipx_node , mismatch net src_ipx_network , IPX circuit ID IP response from %E, mismatched network number %X, %S
Long Syntax:: IPX.159 RIP response from src_ipx_node , mismatched network number src_ipx_network , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP response packet was received with a source network number that is not the same as the network number as this circuit. The packet is discarded.
Cause:: Misconfiguration of the IPX network number.
Action:: Correct configuration so that the IPX network number matches among all routers and servers on the circuit.

IPX.160

Level:: P-TRACE
Short Syntax:: IPX.160 RIP rsp frm src_ipx_node , RIP off, IPX circuit ID IP response from %E, RIP off, %S
Long Syntax:: IPX.160 RIP response from src_ipx_node , RIP off, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP response packet was received, but RIP is OFF, on this circuit. The packet is discarded.
Cause:: RIP is off because either it has been configured to be OFF or RIP has been negotiated to be OFF on this IPXWAN circuit.

IPX.161

Level:: P-TRACE
Short Syntax:: IPX.161 SAP rsp frm NLSP nbr src_ipx_node , IPX circuit ID AP response from NLSP nbr %E, %S
Long Syntax:: IPX.161 SAP response from NLSP nbr src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP response packet was received from an NLSP neighbor. Since we are using NLSP to talk to this neighbor, the RIP information is ignored. The packet is discarded.

IPX.162

Level:: P-TRACE
Short Syntax:: IPX.162 RIP rsp frm NLSP nbr src_ipx_node , IPX circuit ID IP response from NLSP nbr %E, %S
Long Syntax:: IPX.162 RIP response from NLSP nbr src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP response packet was received from an NLSP neighbor. Since we are using NLSP to talk to this neighbor, the RIP information is ignored. The packet is discarded.

IPX.163

Level:: U-TRACE
Short Syntax:: IPX.163 RIP qry snt, IPX circuit ID IP general service query sent, %S
Long Syntax:: IPX.163 RIP general service query sent, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP General Service Query is sent on the circuit to ask for RIP information when the IPX circuit comes up.

IPX.164

Level:: UI-ERROR
Short Syntax:: IPX.164 RIP query snd fld, rsn= reason_code , IPX circuit ID IP query send failed, reason=%d, %S
Long Syntax:: IPX.164 RIP query send failed, reason= reason_code , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A request to send a RIP query packet was rejected and failed due to the indicated reason. See IPX.108 for detail on failure reason codes.

IPX.165

Level:: C-INFO
Short Syntax:: IPX.165 Periodic RIP done: sap_count entries in packet_count pkts, IPX circuit ID eriodic RIP done: %d entries in %d pkts, %S
Long Syntax:: IPX.165 Periodic RIP done: sap_count entries in packet_count pkts, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: The periodic RIP broadcast for this circuit has just completed. The number of RIP entries advertised and packets sent is given.

IPX.166

Level:: C-INFO
Short Syntax:: IPX.166 Delta RIP done: sap_count entries in packet_count pkts, IPX circuit ID elta RIP done: %d entries in %d pkts, %S
Long Syntax:: IPX.166 Delta RIP done: sap_count entries in packet_count pkts, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A delta RIP broadcast for this circuit has just completed. The number of RIP entries advertised and packets sent is given.

IPX.167

Level:: C-INFO
Short Syntax:: IPX.167 Gen Req RIP done: sap_count entries in packet_count pkts, IPX circuit ID eneral Request RIP done: %d entries in %d pkts, %S
Long Syntax:: IPX.167 General Request RIP done: sap_count entries in packet_count pkts, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP response to a general request on this circuit has just completed. The number of RIP entries and packets sent is given.

IPX.168

Level:: UI-ERROR
Short Syntax:: IPX.168 RIP rsp snd fld, rsn= reason_code , IPX circuit ID IP response send failed, reason=%d, %S
Long Syntax:: IPX.168 RIP response send failed, reason= reason_code , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A request to send a RIP response packet on the circuit was rejected and failed due to the indicated reason. The RIP response packet may have been part of a periodic RIP broadcast, a delta RIP broadcast, or in response to a general request. See IPX.108 for detail on failure reason codes.

IPX.169

Level:: P-TRACE
Short Syntax:: IPX.169 RIP rsp snt, for periodic, entry_count entries, IPX circuit ID IP rsp snt, for periodic, %u entries, %S
Long Syntax:: IPX.169 RIP rsp snt, for periodic, entry_count entries, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP response packet has just been sent on the circuit. The number of RIP entries in the packet is shown. The packet was part of the periodic RIP broadcast for the circuit.

IPX.170

Level:: P-TRACE
Short Syntax:: IPX.170 RIP rsp snt, for delta, entry_count entries, IPX circuit ID IP rsp snt, for delta, %u entries, %S
Long Syntax:: IPX.170 RIP rsp snt, for delta, entry_count entries, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP response packet has just been sent on the circuit. The number of RIP entries in the packet is shown. The packet was part of a delta RIP broadcast for the circuit.

IPX.171

Level:: P-TRACE
Short Syntax:: IPX.171 RIP rsp snt, for gen req, entry_count entries, IPX circuit ID IP rsp snt, for gen req, %u entries, %S
Long Syntax:: IPX.171 RIP rsp snt, for gen req, entry_count entries, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP response packet has just been sent on the circuit. The number of RIP entries in the packet is shown. The packet was part of a response to a RIP gneral request.

IPX.172

Level:: UE-ERROR
Short Syntax:: IPX.172 RIP gen req, no mem, from src_ipx_node , IPX circuit ID IP general request, no mem, from %E, %S
Long Syntax:: IPX.172 RIP general request, no mem, from src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP general request was received, but the router did not have memory resources to respond. The packet is discarded.

IPX.173

Level:: C-INFO
Short Syntax:: IPX.173 circ up, ipx_net / ipx_node , IPX circuit ID irc up, %X/%E, %S
Long Syntax:: IPX.173 circ up, ipx_net / ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: The IPX circuit has come up.

IPX.174

Level:: UI-ERROR
Short Syntax:: IPX.174 no hst addr set, IPX circuit ID o host address set, %S
Long Syntax:: IPX.174 no host address set, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: IPX requires an IPX node address to be defined for a circuit. This can ususally occurs on WAN circuits.
Cause:: Serial line enabled without setting host address.
Action:: Set IPX host address.

IPX.175

Level:: C-INFO
Short Syntax:: IPX.175 circ down, ipx_net / ipx_node , IPX circuit ID irc down, %X/%E, %S
Long Syntax:: IPX.175 circ down, ipx_net / ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: The IPX circuit has come down.

IPX.176

Level:: U-TRACE
Short Syntax:: IPX.176 direct circ path dwn: dest_net via next_hop on IPX circuit ID irect circ path dwn: %X via %E on %S
Long Syntax:: IPX.176 direct circ path dwn: dest_net via next_hop on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: The path to thedirectly attached circuit is no longer reachable because the underlying circuit went down.
Cause:: user requested to disable IPX on the circuit.

IPX.177

Level:: U-INFO
Short Syntax:: IPX.177 rt cache clrd for network
Long Syntax:: IPX.177 routing cache cleared for network
Description:: The IPX routing cache has been cleared of entries for the given IPX network, probably as the result of a routing table change.

IPX.178

Level:: UI-ERROR
Short Syntax:: IPX.178 alt path disc, for net destination_net , frm router_node on IPX circuit ID lternate path discarded, for net %X, frm %E on %S
Long Syntax:: IPX.178 alternate path discarded, for net destination_net , frm router_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: An alternate path to the given IPX destination network is available from another router. However, it will not be placed into the routing tables because the number of paths for this IPX network is already at the maximum number to be kept per destination IPX network.
Cause:: Maximum routes kept per destination network smaller than number of routes available.
Action:: None, if your network is functioning as desired; otherwise you may want to increase the maximum routing paths kept per IPX destination network, particularly if parallel paths are desired. Novell calls this the maximum splitting degree.

IPX.179

Level:: UI-ERROR
Short Syntax:: IPX.179 no buf for PING req, IPX circuit ID o buffer available for PING request, %S
Long Syntax:: IPX.179 no buffer available for PING request, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: No packet buffer is available to send an IPX PING packet. The IPX PING will fail.

IPX.180

Level:: UE-ERROR
Short Syntax:: IPX.180 malform ping pkt from src_ipx_net / src_ipx_node , IPX circuit ID alformed Ping packet from %X/%E, %S
Long Syntax:: IPX.180 malformed Ping packet from src_ipx_net / src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A received IPX Ping packet was malformed in some way. The packet was shorter than the minimum 40 bytes, or did not have the PING signature, or had a value for type other than request or reply. The packet is discarded.

IPX.181

Level:: C-TRACE
Short Syntax:: IPX.181 ping req, src_net / src_node -> dest_net / dest_node , IPX circuit ID ing request, %X/%E->%X/%E, %S
Long Syntax:: IPX.181 ping request, src_net / src_node -> dest_net / dest_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A received IPX ping packet was received on the circuit. The IPX source and destination values are given. This router will respond with a ping reply.

IPX.182

Level:: C-TRACE
Short Syntax:: IPX.182 rt dest_net is unreach
Long Syntax:: IPX.182 rt dest_net is unreachable
Description:: A previously reachable network is now no longer reachable.
Cause:: See IPX.032, IPX.051, IPX.155, IPX.0176 messages.

IPX.183

Level:: C-TRACE
Short Syntax:: IPX.183 SAP typ service_type nm [ service_name ] is unreach
Long Syntax:: IPX.183 SAP typ service_type nm [ service_name ] is unreachable
Description:: A previously reachable SAP is now no longer reachable.
Cause:: See IPX.112, IPX.113, IPX.114, IPX.115 messages.

IPX.184

Level:: U-INFO
Short Syntax:: IPX.184 DIR rt: net ipx_net , ticks ticks, hops hops, via direct_net / direct_node on IPX circuit ID IR route: network %X, %d ticks, %hops, via %X/%E on %S
Long Syntax:: IPX.184 DIR route: network ipx_net , ticks ticks, hops ops, via direct_net / direct_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A new direct route has been added to the routing table. A direct route is for a route for a circuit that is directly attached to the router. The ticks and hops for the route are shown. The network and node numbers of the router's directly attached circuit are given.

IPX.185

Level:: U-INFO
Short Syntax:: IPX.185 stat rt install for net ipx_net attempt failed, circ not active: user_circuit_id
Long Syntax:: IPX.185 static route install for net ipx_net attempt failed, circuit not active: user_circuit_id
Description:: A static route for an IPX network was not installed because the circuit was not active.
Cause:: The route's circuit is not active because the circuit is not defined, or the circuit is disabled, or the ciruict has not yet come up.

IPX.186

Level:: U-INFO
Short Syntax:: IPX.186 STAT rt: net ipx_net , ticks ticks, hops hops, via ipx_net / ipx_node on IPX circuit ID TATIC route: network %X, %d ticks, %hops, via %X/%E on %S
Long Syntax:: IPX.186 STATIC route: network ipx_net , ticks ticks, hops ops, via ipx_net / ipx_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A STATIC route had been added to the routing table routing table. The ticks and hops for the route are shown. The network and node numbers of the route's next hop are shown. The circuit of the next hop route is shown.

IPX.187

Level:: U-INFO
Short Syntax:: IPX.187 RIP rt: net ipx_net , ticks ticks, hops hops, via ipx_net / ipx_node on IPX circuit ID IP route: network %X, %d ticks, %hops, via %X/%E on %S
Long Syntax:: IPX.187 RIP route: network ipx_net , ticks ticks, hops ops, via ipx_net / ipx_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP route had been added to the routing table routing table. The ticks and hops for the route are shown. The network and node numbers of the route's next hop are shown. The circuit of the next hop route is shown.

IPX.188

Level:: U-INFO
Short Syntax:: IPX.188 STAT srv: typ= service_type nm=[ service_name ], hop_count hops, from via_node , IPX circuit ID TATIC service: type=%x name=[%.48S], %d hops, from %E, %S
Long Syntax:: IPX.188 STATIC service: type= service_type name=[ service_name ], hop_count hops, from via_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A new service has been added to the service table. The service was staticly configured. Sap type, sap name, hops are given. Source ipx_node and circuit are the SAP information is given.
Cause:: Static services were configured for this circuit.

IPX.189

Level:: UI-ERROR
Short Syntax:: IPX.189 unsupported network/data-link type, circuit-type : IPX circuit config ID nsupported network/data-link type, %s:%S
Long Syntax:: IPX.189 unsupported network/data-link type, circuit-type : IPX circuit config ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: The specified IPX circuit failed initialization because the underlying network type or data-link type is not supported by IPX. An IPX broadcast circuit is supported on Ethernet, Token-ring, FDDI. For backwards-compatibilty with previous releases, an IPX broadcast circuit is also supported on PPP, Frame Relay, X.25, and Proteon Serial Line. An IPXWAN circuit supports PPP, Frame Relay, X.25, IP Relay, and Proteon Serial Line.
Cause:: The interface number now maps to a different network type than it once did. This could possibly happen on routers that have removable or movable hardware cards. Otherwise this should not happen.
Cause:: Perhaps the data-link type has been changed for the interface to one unsupported by IPX.

IPX.190

Level:: P-TRACE
Short Syntax:: IPX.190 RIP gen qry frm src_ipx_node , RIP off, IPX circuit ID IP gen qry from %E, RIP off, %S
Long Syntax:: IPX.190 RIP gen qry from src_ipx_node , RIP off, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP general query packet was received, but RIP is OFF, on this circuit. The packet is discarded.
Cause:: RIP is off because either it has been configured to be OFF or RIP has been negotiated to be OFF on this IPXWAN circuit.
Action:: None, if RIP is supposed to off on the circuit.

IPX.191

Level:: P-TRACE
Short Syntax:: IPX.191 SAP gen qry frm src_ipx_node , SAP off, IPX circuit ID AP gen qry from %E, SAP off, %S
Long Syntax:: IPX.191 SAP gen qry from src_ipx_node , SAP off, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP general query packet was received, but SAP is OFF, on this circuit. The packet is discarded.
Cause:: SAP is off because either it has been configured to be OFF or SAP has been negotiated to be OFF on this IPXWAN circuit.
Action:: None, if SAP is supposed to off on the circuit.

IPX.192

Level:: P-TRACE
Short Syntax:: IPX.192 RIP auto mode: off->on, IPX circuit ID IP automatic mode: off->on, %S
Long Syntax:: IPX.192 RIP automatic mode: off->on, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: RIP automatic mode going from automatic-off to automatic-on.
Cause:: RIP automatic mode has detected a node with a need for RIP and will now send periodic and delta RIP packets until the need disappears.
Action:: None.

IPX.193

Level:: P-TRACE
Short Syntax:: IPX.193 SAP auto mode: off->on, IPX circuit ID AP automatic mode: off->on, %S
Long Syntax:: IPX.193 SAP automatic mode: off->on, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: SAP automatic mode going from automatic-off to automatic-on.
Cause:: SAP automatic mode has detected a node with a need for SAP and will now send periodic and delta SAP packets until the need disappears.
Action:: None.

IPX.194

Level:: P-TRACE
Short Syntax:: IPX.194 RIP auto mode: on->off, IPX circuit ID IP automatic mode: on->off, %S
Long Syntax:: IPX.194 RIP automatic mode: on->off, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: RIP automatic mode going from automatic-on to automatic-off.
Cause:: RIP automatic mode no longer detects the need for RIP and is no longer sending periodic and delta RIP packets.
Action:: None.

IPX.195

Level:: P-TRACE
Short Syntax:: IPX.195 SAP auto mode: on->off, IPX circuit ID IP automatic mode: on->off, %S
Long Syntax:: IPX.195 RIP automatic mode: on->off, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: SAP automatic mode going from automatic-on to automatic-off.
Cause:: SAP automatic mode no longer detects the need for SAP and is no longer sending periodic and delta SAP packets.
Action:: None.

IPX.196

Level:: U-INFO
Short Syntax:: IPX.196 NLSP rt: net ipx_net , ticks ticks, hops hops, via ipx_net / ipx_node on IPX circuit ID LSP route: network %X, %d ticks, %hops, via %X/%E on %S
Long Syntax:: IPX.196 NLSP route: network ipx_net , ticks ticks, hops ops, via ipx_net / ipx_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A new NLSP route to the given network has been added to the routing table. The ticks and hops for the route are shown. There may be more than one path, but only one the first one is displayed by this message. The network and node numbers of the first paths's next hop are shown. The circuit of the first path next hop is shown.

IPX.197

Level:: U-INFO
Short Syntax:: IPX.197 NLSP Xroute: net ipx_net , ticks ticks, hops hops, via ipx_net / ipx_node on IPX circuit ID LSP Xroute: network %X, %d ticks, %hops, via %X/%E on %S
Long Syntax:: IPX.197 NLSP Xroute: network ipx_net , ticks ticks, hops ops, via ipx_net / ipx_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A new NLSP Xroute to the given network has been added to the routing table. The ticks and hops for the route are shown. There may be more than one path, but only one the first one is displayed by this message. The network and node numbers of the first paths's next hop are shown. The circuit of the first path next hop is shown.

IPX.198

Level:: U-INFO
Short Syntax:: IPX.198 NLSP srv info: typ= service_type nm=[ service_name ], hop_count hops, from via_node , IPX circuit ID LSP service info: type=%x name=[%.48S], %d hops, from %E, %S
Long Syntax:: IPX.198 NLSP service info: type= service_type name=[ service_name ], hop_count hops, from via_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A new service has been added to the service table. It was learned by the NLSP protocol. Sap type, sap name, hops are given. There may be more than one path, but only one the first one is displayed by this message. The node number of the first paths's next hop are shown. The circuit of the first path next hop is shown.
Cause:: New service started on NLSP internetwork.
Cause:: Existing service becomes reachable, due to changes in network connectivity.

IPX.199

Level:: UI-ERROR
Short Syntax:: IPX.199 max paths exceeded for typ= service_type nm=[ service_name ] from IPX circuit ID ax paths exceeded for typ=%x nm=[%.48S] from %S
Long Syntax:: IPX.199 max paths exceeded for typ= service_type nm=[ service_name ] from IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: An alternate path to a given SAP has been found However, it will not be placed into the routing tables because the number of paths for this SAP is already at the maximum number to be kept.
Cause:: Maximum routes kept per SAP may be too small.
Action:: None, if your network is working properly.
Action:: Increase the maximum paths kept per IPX destination network. This is also called the maximum splitting degree.

IPX.200

Level:: U-INFO
Short Syntax:: IPX.200 RIP alt rt: net ipx_net , ticks ticks, hops hops, via ipx_net / ipx_node on IPX circuit ID IP alt route: network %X, %d ticks, %hops, via %X/%E on %S
Long Syntax:: IPX.200 RIP alt route: network ipx_net , ticks ticks, hops ops, via ipx_net / ipx_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: An alternative RIP route had been added to the routing table routing table. The ticks and hops for the route are shown. The network and node numbers of the route's next hop are shown. The circuit of the next hop route is shown.

IPX.201

Level:: C-INFO
Short Syntax:: IPX.201 RIP rt chg: net ipx_net , ticks ticks, hops hops, via ipx_net / ipx_node on IPX circuit ID IP route changed: network %X, %d ticks, %hops, via %X/%E on %S
Long Syntax:: IPX.201 RIP route changed: network ipx_net , ticks ticks, hops ops, via ipx_net / ipx_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP route to given IPX network has changed in some way, that is ticks, hops, or the next hop is different. The ticks and hops for the route are shown. The network and node numbers of the route's next hop are shown. The circuit of the next hop route is shown.

IPX.202

Level:: P-TRACE
Short Syntax:: IPX.202 RIP qry frm NLSP nbr src_ipx_node , IPX circuit ID IP query from NLSP nbr %E, %S
Long Syntax:: IPX.202 RIP query from NLSP nbr src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP general query packet was received from a known NLSP neighbor. Since we are using NLSP to talk to this neighbor, a RIP response is not sent back to the neighbor. The packet is discarded.

IPX.203

Level:: P-TRACE
Short Syntax:: IPX.203 SAP qry frm NLSP nbr src_ipx_node , IPX circuit ID AP query from NLSP nbr %E, %S
Long Syntax:: IPX.203 SAP query from NLSP nbr src_ipx_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A SAP general query packet was received from a known NLSP neighbor. Since we are using NLSP to talk to this neighbor, a SAP response is not sent back to the neighbor. The packet is discarded.

IPX.204

Level:: U-INFO
Short Syntax:: IPX.204 Def exit rt: net ipx_net , ticks ticks, hops hops, via ipx_net / ipx_node on IPX circuit ID efault exit route: network %X, %d ticks, %hops, via %X/%E on %S
Long Syntax:: IPX.204 Default exit route: network ipx_net , ticks ticks, hops ops, via ipx_net / ipx_node on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A new NLSP Default exit route has been added to the routing table. The ticks and hops for the route are shown. There may be more than one path, but only one the first one is displayed by this message. This route is derived from looking at the level 2 flag in the Link State Packets. The network and node numbers of the first paths's next hop are shown. The circuit of the first path next hop is shown.

IPX.205

Level:: U-INFO
Short Syntax:: IPX.205 aged out: path to dest_net from next_hop on IPX circuit ID ged out: path to %X from %E on circ %S
Long Syntax:: IPX.205 aged out: path to dest_net from next_hop on circ IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A path to an IPX network has aged out.
Cause:: No RIP routing updates have been received to refresh this entry for the age out time. The age out time is the update interval times the multiplier. The update interval is usually one minute. The multiplier is ususally 3 or 4. The update interval and multiplier are configurable on a circuit basis.

IPX.206

Level:: U-INFO
Short Syntax:: IPX.206 RIP: path down to dest_net from next_hop on IPX circuit ID IP: path down to %X from %E on %S
Long Syntax:: IPX.206 RIP: path down to dest_net from next_hop on IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A path to an IPX network is not longer reachable.
Cause:: Remote network, or intervening network, went down.
Action:: Find out why remote network went down.
Cause:: Network is on router that went down.
Action:: Find out why remote router went down.
Cause:: Network is connected via File Server that was administratively taken down.

IPX.207

Level:: UI-ERROR
Short Syntax:: IPX.207 Preallocation failed for structure_name strucutre
Long Syntax:: IPX.207 Preallocation failed for structure_name strucutre
Description:: The router id not have enough memory to create a private pool of structures. Possible structures are:

IPX.208

Level:: UI-ERROR
Short Syntax:: IPX.208 Allocation of structure_name strucutre failed
Long Syntax:: IPX.208 Allocation of structure_name strucutre failed
Description:: Allocation of an IPX strucutre failed.

IPX.209

Level:: ALWAYS
Short Syntax:: IPX.209 FAILURE: internal network number not configured
Long Syntax:: IPX.209 failure: internal network number not configured
Description:: An IPX internal network number must be defined if IPXWAN or NLSP is going to be used. An IPX internal network number is also very useful as a consistent network number to PING when testing reachability.

IPX.210

Level:: UI-ERROR
Short Syntax:: IPX.210 no buf for NetBIOS, IPX circuit ID o buffer available for NETBIOS, %S
Long Syntax:: IPX.210 no buffer available for NETBIOS, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: No packet buffer is available to propagate this IPX NETBIOS packet.

IPX.211

Level:: UI-ERROR
Short Syntax:: IPX.211 no buf for RIP, IPX circuit ID o buffer available for RIP, %S
Long Syntax:: IPX.211 no buffer available for RIP, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: No packet buffer is available to answer a specific RIP query.

IPX.212

Level:: UI-ERROR
Short Syntax:: IPX.212 no buf for RIP query, IPX circuit ID o buffer available to send RIP query, %S
Long Syntax:: IPX.212 no buffer available to send RIP query, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: No packet buffer is available to send a RIP query.

IPX.213

Level:: UI-ERROR
Short Syntax:: IPX.213 no buf to make RIP resp, IPX circuit ID o buffer available to make RIP response, %S
Long Syntax:: IPX.213 no buffer available to make RIP response, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: No packet buffer is available to send a RIP response.

IPX.214

Level:: UI-ERROR
Short Syntax:: IPX.214 no buf to make SAP GNS resp, IPX circuit ID o buffer available to send a SAP GNS response, %S
Long Syntax:: IPX.214 no buffer available to send a SAP GNS response, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: No packet buffer is available to send a SAP Get Nearest Server response.

IPX.215

Level:: UI-ERROR
Short Syntax:: IPX.215 no buf to send SAP query, IPX circuit ID o buffer available to send a SAP query, %S
Long Syntax:: IPX.215 no buffer available to send a SAP query, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: No packet buffer is available to send a SAP query.

IPX.216

Level:: UI-ERROR
Short Syntax:: IPX.216 no buf to make SAP response, IPX circuit ID o buffer available to make SAP response, %S
Long Syntax:: IPX.216 no buffer available to make SAP response, IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: No packet buffer is available to send a SAP response.
Cause:: Temporary packet buffer shortage due to traffic peak.
Action:: None.

IPX.217

Level:: P-TRACE
Short Syntax:: IPX.217 RIP RTR flt PASS pkt frm source_net / source_node , IPX circuit ID IP Router filter PASS packet from %X/%E, %S
Long Syntax:: IPX.217 RIP Router filter PASS packet from source_net / source_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP packet has successfully PASSED through the RIP Router filter for this circuit. The RIP Router filter is based upon the source_node in the IPX packet header, which is displayed by the message.

IPX.218

Level:: P-TRACE
Short Syntax:: IPX.218 RIP RTR flt DROP pkt frm source_net / source_node , IPX circuit ID IP Router filter DROP packet from %X/%E, %S
Long Syntax:: IPX.218 RIP Router filter DROP packet from source_net / source_node , IPX circuit ID �zl�zk��zlh�zk��zl(�zlX�zl�zlH�zl8
Description:: A RIP packet has DROPPED by the RIP Router filter for this circuit. The RIP Router filter is based upon the source_node in the IPX packet header, which is displayed by the message.

IPX.219

Level:: P-TRACE
Short Syntax:: IPX.219 RIP iodirection flt PASS net ipx_net ,