ELS Messages for Fiber Distributed Data Interface (FDDI)
- Level:
- UI-ERROR
- Short Syntax:
- FDDI.001 setup_phase
fld - bff unav: nt network
- Long Syntax:
- FDDI.001 setup_phase
failed, no buffer available: net network
- Description:
- There were no iorbs available for an ioctl-type function such as
starting the self-test or updating statistics.
The net may be marked down.
- Level:
- C-INFO
- Short Syntax:
- FDDI.002 unexp LLC hdr DSAP
SSAP
control_field
source_FDDI_address
-> dest_FDDI_address
nt network
- Long Syntax:
- FDDI.002 unexpected LLC header DSAP: DSAP
SSAP: SSAP
CTL: control_field
from source_FDDI_address
to dest_FDDI_address
net network
- Description:
- The LLC header has a bad control field
or bad DSAP/control field combination
- Level:
- C-INFO
- Short Syntax:
- FDDI.003 unk SNAP org code organization_code
source_FDDI_address
-> dest_FDDI_address
nt network
- Long Syntax:
- FDDI.003 unknown SNAP organization code organization_code
from source_FDDI_address
to dest_FDDI_address
net network
- Description:
- The 3 byte LLC organization code is unknown. That is, it is neither
0, OUI and an Appletalk/AppleARP packet,
Apple's OUI and an Appletalk packet,
nor DEC's OUI and an AppleARP packet.
- Level:
- C-INFO
- Short Syntax:
- FDDI.004 unk SNAP type SNAP_type_code
source_FDDI_address
-> dest_FDDI_address
nt network
- Long Syntax:
- FDDI.004 unknown SNAP type code SNAP_type_code
from source_FDDI_address
to dest_FDDI_address
net network
- Description:
- The LLC has a bad SNAP type code.
- Level:
- C-INFO
- Short Syntax:
- FDDI.005 unk DSAP DSAP
source_FDDI_address
-> dest_FDDI_address
nt network
- Long Syntax:
- FDDI.005 unknown DSAP DSAP
from source_FDDI_address
to dest_FDDI_address
net network
- Description:
- The LLC has a bad DSAP.
- Level:
- UE-ERROR
- Short Syntax:
- FDDI.006 DN bd ln actual_length
claimed_length
source_FDDI_address
-> destination_FDDI_address
nt network
- Long Syntax:
- FDDI.006 DECnet packet received with a bad length actual actual_length
claimed claimed_length
from source_FDDI_address
to destination_FDDI_address
network network
- Description:
- A DECnet packet was received with a length field that was larger than
the actual length of the packet.
- Level:
- UE-ERROR
- Short Syntax:
- FDDI.007 No ALP for function
nt network
- Long Syntax:
- FDDI.007 function
failed - Cannot ALP table. Net network
- Description:
- Need some permanent data memory and cannot get it, for example, for group addresses.
- Level:
- UE-ERROR
- Short Syntax:
- FDDI.008 Bad SMT xmt rs: reason_string
ln: length
-> dest_FDDI_addr
nt network
- Long Syntax:
- FDDI.008 Bad SMT xmt reason reason_string
length length
dest dest_FDDI_addr
Net network
- Description:
- SMT transmit failed due to bad length (reason 0), device overflow (2),
or net down (3).
- Level:
- C-INFO
- Short Syntax:
- FDDI.009 Info_string
at address
nt network
- Long Syntax:
- FDDI.009 Info_string
at address
Net network
- Description:
- Information, such as BSI register values, is in Buffer memory at
the given address. THE BUFFER is NOT FREED. This message should appear
only when one is using the DDT debugger.
- Level:
- C-INFO
- Short Syntax:
- FDDI.010 Bad smt_fr_class
reason_string
reason_val
fr source_FDDI_addr
nt network
- Long Syntax:
- FDDI.010 Bad smt_fr_class
frame reason_string
reason_val
received from source_FDDI_addr
on net network
- Description:
- Bad SMT frame received. This may well be due to an error at
the sending station. This station will not use the information.
- Level:
- C-INFO
- Short Syntax:
- FDDI.011 NSA fr source_FDDI_addr
UNA: UNA_FDDI_addr
nt network
- Long Syntax:
- FDDI.011 NIF NSA received from source_FDDI_addr
whose UNA is UNA_FDDI_addr
on net network
- Description:
- Not an error. A NIF NSA frame was received from this station's
upstream neighbor with a report of that station's upstream neighbor.
- Level:
- C-INFO
- Short Syntax:
- FDDI.012 GET rsp ln length
lw_0
lw_1
lw_2
lw_3
to dest_FDDI_addr
nt network
- Long Syntax:
- FDDI.012 GET rsp length
bytes lw_0
lw_1
lw_2
lw_3
to dest_FDDI_addr
on net network
- Description:
- Not an error. This station is sending a GET response starting
with the 16 bytes shown.
- Level:
- C-INFO
- Short Syntax:
- FDDI.013 SMT xmted smt_fr_class
frame_type
# trans_id
to dest_FDDI_addr_hi
dest_FDDI_addr_mid
dest_FDDI_addr_low
nt network
- Long Syntax:
- FDDI.013 SMT transmitted smt_fr_class
frame_type
# trans_id
to dest_FDDI_addr_hi
dest_FDDI_addr_mid
dest_FDDI_addr_low
on net network
- Description:
- Not an error. SMT is transmitting a frame. Note that self-addressed
ESF announcements constitute the CNX500's maintenance packets.
- Level:
- C-INFO
- Short Syntax:
- FDDI.014 SMT rcvd smt_fr_class
frame_type
ln length
fm source_FDDI_addr
nt network
- Long Syntax:
- FDDI.014 SMT received a smt_fr_class
frame_type
frame len length
from source_FDDI_addr
on net network
- Description:
- Not an error. SMT has received an "unusual" frame, which it cannot
parse further.
- Level:
- C-INFO
- Short Syntax:
- FDDI.015 SMT rcv dest_FDDI_addr
-> source_FDDI_addr
# trans_number
nt network
- Long Syntax:
- FDDI.015 SMT received a frame addressed to dest_FDDI_addr
from source_FDDI_addr
# trans_number
on net network
- Description:
- No error. SMT has received a frame.
- Level:
- UI-ERROR
- Short Syntax:
- FDDI.016 SMT DAD rcv dest_FDDI_addr
-> source_FDDI_addr
nt network
- Long Syntax:
- FDDI.016 SMT Duplicate Address Detected via frame addressed to dest_FDDI_addr
from source_FDDI_addr
on net network
- Description:
- A big error. SMT received a frame addressed to it with the A bit set.
This is a serious FDDI event. If there is another station with the same
MAC address on the ring, ring initialization and frame stripping will
be adversely affected. Indeed, if the ring goes down it may never
recover. This station will mark the net as down, note in memory that
a duplicate address was detected and NEVER come up unless the router
is restarted. This ensures that the rest of the ring is not
periodically harmed.
- Level:
- UI-ERROR
- Short Syntax:
- FDDI.017 SMT Q ovf dest_FDDI_addr
-> source_FDDI_addr
nt network
- Long Syntax:
- FDDI.017 SMT Queue overflow Detected via frame addressed to dest_FDDI_addr
from source_FDDI_addr
on net network
- Description:
- An error. SMT receive queue overflowed. This frame will not be queued
for SMT processing, but otherwise no action is taken.
- Level:
- C-INFO
- Short Syntax:
- FDDI.018 Rcvd FC FC
ln length
fm source_FDDI_addr
nt network
- Long Syntax:
- FDDI.018 Received a FC FC
frame len length
from source_FDDI_addr
on net network
- Description:
- Not necessarily an error. Received a frame with FC neither
LLC nor SMT. No further processing is done on the frame.
- Level:
- UI-ERROR
- Short Syntax:
- FDDI.019 Mcast tbl ovf multicast_FDDI_addr
not in nt network
- Long Syntax:
- FDDI.019 Multicast table overflow with address multicast_FDDI_addr
on net network
- Description:
- A big error. Multicast table overflowed. Since the maximum number of
multicast addresses needed can be determined in advance (at release
time), this should never happen.
- Level:
- C-INFO
- Short Syntax:
- FDDI.020 protocol_type
pkt flt for prot = protocol
, nt network
- Long Syntax:
- FDDI.020 protocol_type
type pakcet filtered for protocol = protocol
network network
- Description:
- Protocol type like, Ethertype, DSAPytpe or SNAPtype packet filtered.
This is due to the user supplied protocol filtering information. (STB)
- Level:
- C-INFO
- Short Syntax:
- FDDI.021 DROP, proto= protocol_type
enb but adr dest_fddi_addr
not reg, nt network
- Long Syntax:
- FDDI.021 Dropped, protocol = protocol_type
enabled but address dest_fddi_addr
not registered, network network
- Description:
- Packet dropped for an enabled protocol whose destination address
is neither ours nor of interested multicast address. (STB)
- Level:
- UI-ERROR
- Short Syntax:
- FDDI.022 Pwr-Up Diag Fail: group_no
/ test_no
CSR CSR
- Long Syntax:
- FDDI.022 Power-up diagnostic failure in group group_no
, test test_no
, net's CSR is CSR
.
- Description:
- A hardware error. The on-interface-board power-up diagnostics
are run as part of initialization. If they fail, this report is given,
but the board will continue to come up if possible.
The group/test numbers may help field service in debugging the board.
- Level:
- C-INFO
- Short Syntax:
- FDDI.023 state_machine
old_state
-> new_state
CSR CSR
- Long Syntax:
- FDDI.023 Connection state machine state_machine
went from state old_state
to state new_state
on the net with CSR CSR
- Description:
- No error. A state machine changed state on the net with the board
whose CSR is noted. Certain states are to be expected, others may not
be, such as RMT's DETECT- states. Entry to these generally reflect
problems in neighboring stations or the cables.
- Level:
- UE-ERROR
- Short Syntax:
- FDDI.024 drop IPX pkt w/ encap_seen
encaps - using encap_used
encaps on int intnum
- Long Syntax:
- FDDI.024 dropped IPX pkt with encaps encap_seen
using encap_used
on interface intnum
- Description:
- This message is generated when an IPX packet is recieved with
an encapsulation other than that which has been selected for this interface.
- Cause:
- Normal for networks using multiple encapsulations on a single wire.
- Action:
- None needed.
- Level:
- UI-ERROR
- Short Syntax:
- FDDI.025 FD_IN got uni IP: fddi_hdr_longword
nt network
- Long Syntax:
- FDDI.025 FDDI input got unicast IP: fddi_hdr_longword
nt network
- Description:
- This packet should not have been received; packet has been dropped.
- Cause:
- Bad hardware, nonsense data on network.
- Level:
- UI-ERROR
- Short Syntax:
- FDDI.026 FD_IN got uni VN: fddi_hdr_longword
nt network
- Long Syntax:
- FDDI.026 FDDI input got unicast Vines: fddi_hdr_longword
nt network
- Description:
- This packet should not have been received; packet has been dropped.
- Cause:
- Bad hardware, nonsense data on network.
- Level:
- UI-ERROR
- Short Syntax:
- FDDI.027 BDG_IN got SMT: fddi_hdr_longword
nt network
- Long Syntax:
- FDDI.027 Bridge input got SMT packet: fddi_hdr_longword
nt network
- Description:
- This packet should not have been received; packet has been dropped.
- Cause:
- Bad hardware, nonsense data on network.
- Panic
- fddibdtbl
- Short Syntax:
- fddibdtbl: fd_llc tbl out of date
- Description:
- The FDDI LLC table is out of date.
- Action:
- Contact customer service.
- Panic
- fddialp
- Short Syntax:
- fddialp: Can't allocate fddi pernet structure
- Description:
- Cannot allocate the network specific FDDI structure.
- Panic
- fddibprt
- Short Syntax:
- fddibprt: bad prot init
- Description:
- An unsupported Network Layer protocol tried to initialize the FDDI
handler.
- Action:
- Contact customer service.
- Panic
- fddibreq
- Short Syntax:
- fddibreq: bad xmit rqst
- Description:
- An unsupported protocol packet was given to the FDDI handler for
transmission.
- Action:
- Contact customer service.