ELS Messages for easy_trp.msg
- Level:
- ALWAYS
- Short Syntax:
- EZ.001 Starting.
- Long Syntax:
- EZ.001 Starting.
- Description:
- EasyStart process has begun.
- Level:
- ALWAYS
- Short Syntax:
- EZ.002 Changed one or more cfg params.
- Long Syntax:
- EZ.002 Changed one or more configuration parameters.
- Description:
- EasyStart changed a data link (e.g., PPP to FR), or changed
a data link parameter in permanent configuration. EasyStart
restarts for the changes to take effect.
- Level:
- ALWAYS
- Short Syntax:
- EZ.003 Bootp failed.
- Long Syntax:
- EZ.003 Called bootp client and it failed
- Description:
- EasyStart called BOOTP and it failed either because there is no BOOTP
server on the attached (working) segment or because you did not
configure the BOOTP server correctly.
- Level:
- ALWAYS
- Short Syntax:
- EZ.004 Rcvd boot info: ipAddr ipAddr
, ipMask ipMask
on intf interfaceNumber
- Long Syntax:
- EZ.004 Received boot info: IPaddr: ipAddr
, mask: ipMask
on interface: interfaceNumber
- Description:
- EasyStart called BOOTP and received necessary information to
perform a TFTP download of needed configuration parameters.
EasyStart will update the IP configuration with an IP address and
a mask. Then, EasyStart will reboot the system for the changes to
take effect.
- Level:
- ALWAYS
- Short Syntax:
- EZ.005 TFTP failed. Backing up to device configuration step.
- Long Syntax:
- EZ.005 TFTP failed. Backing up to device configuration step.
- Description:
- EasyStart TFTP transfer failed. EasyStart will go back to the device
configuration step and try again.
- Level:
- ALWAYS
- Short Syntax:
- EZ.006 All dlinks/parameters tried but failed; resetting to def values.
- Long Syntax:
- EZ.006 All datalinks and parameters tried but failed; resetting; restarting.
- Description:
- The router tried all data links and parameters but failed. EasyStart
will reset the configuration and start from the beginning.
- Level:
- ALWAYS
- Short Syntax:
- EZ.007 Waiting up to seconds
seconds for devices to pass self-test.
- Long Syntax:
- EZ.007 Waiting up to seconds
seconds for devices to pass self-test.
- Description:
- EasyStart is waiting for devices to pass self-test. The result is to
have the device in the up or down state. Since some devices may come
up quickly, there is a variable timer to avoid waiting.
- Level:
- ALWAYS
- Short Syntax:
- EZ.008 TFTP transfer completed successfully. *** EasyStart Completed Successfully ***
- Long Syntax:
- EZ.008 TFTP transfer completed successfully.
- Description:
- EasyStart succeeded. The router is restarting to the operational
configuration which was downloaded.
- Level:
- ALWAYS
- Short Syntax:
- EZ.009 *** Restarting Router ***
- Long Syntax:
- EZ.009 Restarting router
- Description:
- Parameters have changed. EasyStart is restarting to have the changes
take effect.