ELS Messages for BSC Spoofing (BSPF)
- Level:
- UI-ERROR
- Short Syntax:
- BSPF.001 Invalid configuration with ip addr cnfgd on nt networkID
- Long Syntax:
- BSPF.001 Invalid router configuration because an IP address has been configured on network networkID
- Description:
- IP addresses are not allowed to be configured on the BSC Spoofing
interfaces.
- Level:
- UI-ERROR
- Short Syntax:
- BSPF.002 Unsupported intf nt networkID
- Long Syntax:
- BSPF.002 Unsupported interface on network networkID
- Description:
- An unsupported network interface had been configured on the BSC Spoofing
group.
- Level:
- C-INFO
- Short Syntax:
- BSPF.003 BSC Spoofing intf initialization started nt networkID
- Long Syntax:
- BSPF.003 BSC Spoofing initialization started on network networkID
- Description:
- The BSC Spoofing forwarder began initialization on the interface.
- Level:
- C-INFO
- Short Syntax:
- BSPF.004 BSC Spoofing intf init completed nt networkID
- Long Syntax:
- BSPF.004 BSC Spoofing initialization completed on network networkID
- Description:
- The BSC Spoofing forwarder completed initialization on the
interface.
- Level:
- UI-ERROR
- Short Syntax:
- BSPF.005 Discard scndry->prmry pkt addr BSPF_addr
H net congestd on nt networkID
- Long Syntax:
- BSPF.005 Discard BSPF frame with BSC address BSPF_addr
H heading to primary station due to network congestion on network networkID
- Description:
- A Sec->Pri BSPF frame had been discarded out a network interface due to
congestion.
- Cause:
- Bursty traffic may be causing outbound frame congestion or
internal software inconsistancies exists.
check bridge configuration.
- Level:
- C-TRACE
- Short Syntax:
- BSPF.006 Added prmry->scndry pkt addr BSPF_address
H to BSPF queue
- Long Syntax:
- BSPF.006 Added packet received on primary side with BSC address BSPF_address
H onto the BSPF queue.
- Description:
- This message is generated whenever the forwarder receives a BSC Spoofing
frame from a primary port (port directly or indirectly attached to a
primary station) destined for a secondary port (port directly or
indirectly attached to a secondary station).
- Level:
- C-TRACE
- Short Syntax:
- BSPF.007 added scndry->prmry pkt addr BSPF_address
H to BSPF queue
- Long Syntax:
- BSPF.007 Added packet received on secondary side with BSPF address BSPF_address
H onto the BSPF queue.
- Description:
- This message is generated whenever the forwarder receives a BSC Spoofing
frame from a secondary port (port directly or indirectly attached to
a secondary station) destined for a primary port (port directly or
indirectly attached to a primary station).
- Level:
- CE-ERROR
- Short Syntax:
- BSPF.008 frm disc group group_num
not defined nt networkID
- Long Syntax:
- BSPF.008 A BSC Spoofing frame discarded due to group group_num
defined in the frame received from the network networkID
not being defined in the router.
- Description:
- A BSC Spoofing frame has been discarded due to the group number of the
frame not being defined for that router.
- Level:
- CE-ERROR
- Short Syntax:
- BSPF.009 Frame discarded because group group_num
is disabled nt networkID
- Long Syntax:
- BSPF.009 A BSC Spoofing frame discarded due to group group_num
being disabled for frame coming in from the network networkID
.
- Description:
- A BSC Spoofing frame has been discarded due to the group not being
enabled.
- Level:
- CE-ERROR
- Short Syntax:
- BSPF.010 Frame with BSC addr BSPF_addr
H group group_num
disc src primary port disabled
- Long Syntax:
- BSPF.010 A BSC Spoofing frame with BSC address BSPF_addr
H discarded due to the source primary port of group group_num
being disabled.
- Description:
- A BSC Spoofing frame has been discarded due to the source port's (where
the frame was coming from) being disabled.
- Level:
- CE-ERROR
- Short Syntax:
- BSPF.011 Frame discarded because dev cu_num
not defined nt networkID
- Long Syntax:
- BSPF.011 A BSC Spoofing frame discarded due to control unit cu_num
defined in the frame received from the network networkID
not being defined in the router.
- Description:
- A BSC Spoofing frame discarded due to control unit number defined in
the frame received from the network interface not being defined in the
that router.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.012 Frame discarded src prt BSC addr BSPF_addr
H not found in group group_num
- Long Syntax:
- BSPF.012 A BSC Spoofing frame discarded due to the src port with BSC address BSPF_addr
H specified in the frame not being found in group group_num
.
- Description:
- A BSC Spoofing frame has been discarded due to the src port with the
BSC address specified in the frame not being found in the group
specified. This is a result of user misconfiguration of the group.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.013 Frame with BSC addr BSPF_addr
H group group_num
disc because dst primary port disabled
- Long Syntax:
- BSPF.013 A BSC Spoofing frame with BSC address BSPF_addr
H discarded due to the destination primary port of group group_num
being disabled.
- Description:
- A BSC Spoofing frame has been discarded due to the destination port
(where the frame was heading to) being disabled.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.014 Frame discarded prt dst BSC addr BSPF_addr
H not fnd in group group_num
- Long Syntax:
- BSPF.014 A BSC Spoofing frame discarded due to the destination port BSC address BSPF_addr
H specified in the packet not being found in group group_num
.
- Description:
- A BSC Spoofing frame has been discarded due to the destination port with
the BSC address specified in the frame not being found in the group
specified. This is a result of user misconfiguration of the group.
The specific port with BSC address %d was not added to the group.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.015 A frm with dst BSC addr BSPF_addr
H discarded; rly dwn or rly disabled networkID
- Long Syntax:
- BSPF.015 BSPF frame with dst BSC addr BSPF_addr
H discarded due to down condition on network networkID
- Description:
- A BSPF frame had been discarded due to the BSC Spoofing failing to
forward out a network interface which had been in a down state.
This message will be printed if the network is down or if IP is not
not currently enabled; if IP is not enabled, no BSC Spoofing can take
place, so the frame is simply discarded.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.016 A discarded scndry->prmry frame BSC addr BSPF_addr
H rjd rsn = reason
on nt networkID
- Long Syntax:
- BSPF.016 discard net rejected BSPF frame address BSPF_addr
H heading for primary station with reject reason = reason
on network networkID
- Description:
- A BSC Spoofing frame has rejected by the network interface and
discarded.
- Level:
- P-TRACE
- Short Syntax:
- BSPF.017 Discard frame src_BSPF_addr
H -> dst_BSPF_addr
H nt networkID
- Long Syntax:
- BSPF.017 Discarded frame with source addr src_BSPF_addr
H and destination addr dst_BSPF_addr
H on network networkID
- Description:
- A frame had been discarded due to BSC Spoofing not configured on
interface noted.
- Cause:
- The null or fake forwarder is configured on the interface, all
received BSC Spoofing frames are discarded.
- Level:
- C-INFO
- Short Syntax:
- BSPF.018 Forwarded BSPF from scndry->prmry BSC addr BSPF_addr
H nt networkID
- Long Syntax:
- BSPF.018 Forwarded BSC Spoofing frame from secondary station destined for primary station with frame BSC address BSPF_addr
H on network networkID
- Description:
- A frame traveling in the direction of secondary->primary station has
been forwarded out onto the interface noted.
- Level:
- C-INFO
- Short Syntax:
- BSPF.019 Forwarded BSPF from prmry->scndry BSC addr BSPF_addr
H nt networkID
- Long Syntax:
- BSPF.019 forwarded BSC Spoofing frame from primary station destined for secondary station with frame BSC address BSPF_addr
H on network networkID
- Description:
- A frame traveling in the direction of primary->secondary station has
been forwarded out onto the interface noted.
- Level:
- UI-ERROR
- Short Syntax:
- BSPF.020 Discard from from nt networkID
; IP not enabled
- Long Syntax:
- BSPF.020 Discard BSPF frame from network networkID
because IP is not enabled on router
- Description:
- A BSC Spoofing frame has discarded. In order for BSC Spoofing to
work, IP has to be enabled on the router. The user must add at least
one IP address to at least one of its non-BSC Spoofing interfaces.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.021 Received block with bad crc from nt networkID
- Long Syntax:
- BSPF.021 A block with a bad CRC was received from network networkID
.
- Description:
- A BSC block has been received with a bad CRC by the network
interface and discarded. Normal protocol procedures should recover.
Excessive CRC errors indicate transmission line problems.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.022 Discarded frame because group group_num
cnfg bad
- Long Syntax:
- BSPF.022 Frame discarded because group group_num
configuration is bad.
- Description:
- This message is generated when the forwarder must discard a
packet because the group configuration among the routers participating
in BSC Spoofing are inconsistent with each other. Check to make sure
the primary and secondary attributes of the ports in groups are
consistent.
- Level:
- C-TRACE
- Short Syntax:
- BSPF.023 Data blk good crc from nt networkID
- Long Syntax:
- BSPF.023 A block with a good CRC was received from network networkID
.
- Description:
- This message is generated whenever a BSC data block is successfully
received from the BSC line.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.024 Discard prmry->scndry pkt addr BSPF_addr
H net congestd on nt networkID
- Long Syntax:
- BSPF.024 Discard BSPF frame with BSC address BSPF_addr
H heading to secondary station due to network congestion on network networkID
- Description:
- A Pri->Sec BSPF frame had been discarded out a network interface due to
congestion.
- Cause:
- Bursty traffic maybe causing outbound frame congestion or
internal software inconsistancies exists.
check bridge configuration.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.025 Frame with BSC addr BSPF_addr
H group group_num
disc src scndry port dsbld
- Long Syntax:
- BSPF.025 A BSC Spoofing frame with BSC address BSPF_addr
H discarded due to the source secondary port of group group_num
being disabled.
- Description:
- A BSC Spoofing frame has been discarded due to the source port(where
the frame was coming from) being disabled.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.026 Frame with BSC addr BSPF_addr
H group group_num
disc dst scndry port dsbld
- Long Syntax:
- BSPF.026 A BSC Spoofing frame with BSC address BSPF_addr
H discarded due to the destination secondary port of group group_num
being disabled.
- Description:
- A BSC Spoofing frame has been discarded due to the destination port
(where the frame was heading to) being disabled.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.027 Discard prmry->scndry frm BSC addr BSPF_addr
H rjd rsn = reason
on nt networkID
- Long Syntax:
- BSPF.027 Discard net rejected BSC frame address BSPF_addr
H heading for secondary station with reject reason = reason
on network networkID
- Description:
- A BSC Spoofing frame has rejected by the network interface and
discarded.
- Level:
- C-TRACE
- Short Syntax:
- BSPF.028 Sending activate dev cu_addr
to rmt
- Long Syntax:
- BSPF.028 Sendind Activate Device cu_addr
Request to Remote End.
- Description:
- The Primary end has detected polls for an inactive device and is
sending an activate request to the Secondary end to begin polling.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.029 No rsp dev cu_addr
nt networkID
- Long Syntax:
- BSPF.029 Device cu_addr
on network networkID
is not responding to polls.
- Description:
- The BSC control unit configured on the network is not responding
to polling.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.030 Err xmt to dev cu_addr
nt networkID
- Long Syntax:
- BSPF.030 Interface error sending block to device cu_addr
on network networkID
.
- Description:
- The local network interface was unable to transmit a block to the
local BSC control unit configured on the network.
- Level:
- P-TRACE
- Short Syntax:
- BSPF.031 Actvating dev cu_addr
nt networkID
- Long Syntax:
- BSPF.031 Activating device cu_addr
on network networkID
.
- Description:
- BSC Spoofing is activating local device for polling or responding.
- Level:
- P-TRACE
- Short Syntax:
- BSPF.032 Rx Xoff dev cu_addr
nt networkID
- Long Syntax:
- BSPF.032 Received Xoff for device cu_addr
on network networkID
.
- Description:
- BSC Spoofing has received an Xoff flow control request from the
remote end for this local device.
- Level:
- P-TRACE
- Short Syntax:
- BSPF.033 Rx Xon dev cu_addr
nt networkID
- Long Syntax:
- BSPF.033 Received Xon for device cu_addr
on network networkID
.
- Description:
- BSC Spoofing has received an Xon flow control request from the
remote end for this local device.
- Level:
- P-TRACE
- Short Syntax:
- BSPF.034 Frm dsc nt act dev cu_addr
nt networkID
- Long Syntax:
- BSPF.034 A data block received from the remote for device cu_addr
on network networkID
was discarded because the device was not active.
- Description:
- BSC Spoofing has received a data frame for the local device, but the
local device is not activated. The frame is discarded.
- Level:
- C-TRACE
- Short Syntax:
- BSPF.035 bsc tcp fclos int networkID
- Long Syntax:
- BSPF.035 BSC TCP force close interface networkID
- Description:
- A TCP connection is in process of being force closed.
- Level:
- C-INFO
- Short Syntax:
- BSPF.036 Forwarded BSPF frm addr BSPF_addr
H to TCP
- Long Syntax:
- BSPF.036 Forwarded BSC Spoofing frame BSC address BSPF_addr
H to TCP
- Description:
- A frame has been forwarded out to the TCP connection.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.037 Discard frm BSC addr BSPF_addr
H no TCP conn
- Long Syntax:
- BSPF.037 BSC frame with frame BSC address BSPF_addr
H discarded because the TCP connection was lost
- Description:
- A frame traveling to the remote end has been discarded because the
TCP connection has been lost.
- Level:
- C-INFO
- Short Syntax:
- BSPF.038 Frame BSC addr BSPF_addr
H to TCP holdq
- Long Syntax:
- BSPF.038 BSC frame with frame BSC address BSPF_addr
H has been put on the TCP holding queue because TCP has no room to transmit it.
- Description:
- A frame traveling to the remote end has been held because the TCP
connection has been filled up.
- Level:
- C-INFO
- Short Syntax:
- BSPF.039 Sending Xoff to rmt(s)
- Long Syntax:
- BSPF.039 Xoff requests are being sent to remotes due to local congestion on the BSC queue.
- Description:
- The local BSC device is not keeping up with the data flow from the
remotes, so flow control off requests are sent to remote(s).
- Level:
- C-INFO
- Short Syntax:
- BSPF.040 Sending Xon to remote(s)
- Long Syntax:
- BSPF.040 Xon requests are being sent to remotes due to the clearing of local congestion on the BSC queue.
- Description:
- The local BSC device has accepted enough data to allow the remotes
to again send data, so flow control on requests are sent to
the remote(s).
- Level:
- C-INFO
- Short Syntax:
- BSPF.041 Unable to alloc mem for ctrl msg - addr BSPF_addr
H nt networkID
- Long Syntax:
- BSPF.041 The BSPF forwarder failed to allocate sufficient memory to be used in sending a control flow message - BSC address BSPF_addr
H on network networkID
- Description:
- The BSPF forwarder failed to allocate sufficient memory to be used in sending a control flow message. The interface is being disabled.
- Level:
- C-INFO
- Short Syntax:
- BSPF.042 TCP act opn nt networkID
- Long Syntax:
- BSPF.042 A TCP active open was initiated on network networkID
- Description:
- A TCP open command has been sent to the destination.
- Level:
- C-INFO
- Short Syntax:
- BSPF.043 TCP clos nt networkID
- Long Syntax:
- BSPF.043 A TCP close was initiated on network networkID
- Description:
- A TCP close has been started.
- Level:
- C-INFO
- Short Syntax:
- BSPF.044 TCP tmo nt networkID
- Long Syntax:
- BSPF.044 A TCP timeout has occurred on network networkID
- Description:
- A TCP connection timeout has has occurred.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.045 TCP wrq empty nt networkID
- Long Syntax:
- BSPF.045 A TCP write attempted with empty queue network networkID
- Description:
- A TCP write was attempted but the write queue is empty.
- Level:
- C-INFO
- Short Syntax:
- BSPF.046 TCP tcb read nt networkID
- Long Syntax:
- BSPF.046 A TCP read of the tcb was started network networkID
- Description:
- A TCP read of the tcb was started indicating call data processing.
- Level:
- C-INFO
- Short Syntax:
- BSPF.047 TCP rd of rx blk nt networkID
- Long Syntax:
- BSPF.047 A TCP write attempted with empty queue network networkID
- Description:
- A TCP write was attempted but the write queue is empty.
- Level:
- CI_ERROR
- Short Syntax:
- BSPF.048 Mem alloc fail nt networkID
- Long Syntax:
- BSPF.048 A memory allocation request has failed for network networkID
- Description:
- A memory allocation request for a critical resource has failed.
- Level:
- C-INFO
- Short Syntax:
- BSPF.049 TCP pass opn nt networkID
- Long Syntax:
- BSPF.049 A TCP passive open was initiated on network networkID
- Description:
- A TCP passive open has been on the specified interface and network.
- Level:
- C-INFO
- Short Syntax:
- BSPF.050 TCP pass opn fail nt networkID
- Long Syntax:
- BSPF.050 A TCP passive open was initiated which failed on network networkID
- Description:
- A TCP passive open attempt has failed on the specified interface and
network.
- Level:
- C-TRACE
- Short Syntax:
- BSPF.051 Buf err iob BSPF_iorb
H nt networkID
- Long Syntax:
- BSPF.051 A buffer error has been detected in iob BSPF_iorb
H on network networkID
- Description:
- A buffer error has been detected on the specified iorb, network and
interface.
- Level:
- CI-ERROR
- Short Syntax:
- BSPF.052 grp group
type err nt networkID
- Long Syntax:
- BSPF.052 The BSPF group group
net type or interface type is wrong, port is disabled for net type networkID
- Description:
- A BSC relay frame destined for a far router has been discarded
because interface type is wrong or port is disabled.
- Panic
- BSPFimem
- Short Syntax:
- BSPF mem alloc failed\r\n
- Description:
- The BSPF forwarder failed to allocate sufficient memory to complete
initialization.
- Action:
- Contact customer service.
- Panic
- BSPFudperr
- Short Syntax:
- BSPF udp port not avail\r\n
- Description:
- Another application registered previously with BSPF's UDP port.
- Action:
- Contact customer service.