ELS Messages for Apollo Token Ring Network Interface (ATR)
- Level:
- UE-ERROR
- Short Syntax:
- ATR.001 fail rec rcvd frm source_address
nt network
- Long Syntax:
- ATR.001 Fail record received from source_address
network network
- Description:
- This message is generated when a failure record is received from
another node on the ring.
- Cause:
- Another node has determined that there are sticky biphase errors
or that send messages are not returning.
- Action:
- Use Domain/OS lcnode command to diagnose ring.
- Level:
- UE-ERROR
- Short Syntax:
- ATR.002 bd ver or lngth frm source_address
nt network
- Long Syntax:
- ATR.002 Bad version or length in packet from source_address
network network
- Description:
- This message is generated when a packet is received with an
incorrect version or bad length.
- Cause:
- This is probably an incorrect length unless there is a very
old Apollo node on the ring.
- Level:
- P-TRACE
- Short Syntax:
- ATR.003 pkt rcvd frm source_address
for DDS nt network
- Long Syntax:
- ATR.003 Packet received from source_address
for Apollo Domain forwarder network network
- Description:
- This message is generated for each packet the handler passes
up to the Apollo Domain forwarder.
- Level:
- P-TRACE
- Short Syntax:
- ATR.004 pkt rcvd frm source_address
for IP nt network
- Long Syntax:
- ATR.004 Packet received from source_address
for IP forwarder network network
- Description:
- This message is generated for each packet the handler passes
up to the IP forwarder.
- Level:
- P-TRACE
- Short Syntax:
- ATR.005 ARP pkt rcvd frm source_address
nt network
- Long Syntax:
- ATR.005 ARP packet received from source_address
network network
- Description:
- This message is generated for each packet the handler passes
up to the ARP handler.
- Level:
- UE-ERROR
- Short Syntax:
- ATR.006 unkn IP pkt typ frm source_address
nt network
- Long Syntax:
- ATR.006 Unknown IP packet type from source_address
network network
- Description:
- This message is generated when a packet arrives on the Domain
TCP socket which is not for IP or ARP.
- Level:
- P-TRACE
- Short Syntax:
- ATR.007 ARP snt to destination_address
nt network
- Long Syntax:
- ATR.007 ARP packet sent to destination_address
network network
- Description:
- This message is generated when an ARP packet is sent.
- Level:
- P-TRACE
- Short Syntax:
- ATR.008 IP snt to destination_address
nt network
- Long Syntax:
- ATR.008 IP packet sent to destination_address
network network
- Description:
- This message is generated when an IP packet is sent.
- Level:
- U-TRACE
- Short Syntax:
- ATR.009 mnt pkt snt nt network
- Long Syntax:
- ATR.009 Maintainance packet sent network network
- Description:
- This message is generated when a maintainance packet is sent.
Maint packets are only sent when there has been no activity
on the ring for one minute.
- Level:
- UE-ERROR
- Short Syntax:
- ATR.010 fail rec snt nt network
- Long Syntax:
- ATR.010 Fail record sent network network
- Description:
- This message is generated when a maintainance packet cannot
be sent. The fail record may also fail to be sent.
- Level:
- P-TRACE
- Short Syntax:
- ATR.011 DDS snt to destination_address
nt network
- Long Syntax:
- ATR.011 DDS packet sent to destination_address
network network
- Description:
- This message is generated when an DDS packet is sent.
- Level:
- UE-ERROR
- Short Syntax:
- ATR.012 shrt for IP/ARP frm source_address
nt network
- Long Syntax:
- ATR.012 Too short for IP/ARP header from source_address
network network
- Description:
- This message is generated when a packet is received which
is not long enough to contain the extra header for IP and
ARP packets.
- Cause:
- Programming error at remote node, or packet corruption on ring.
- Level:
- UE-ERROR
- Short Syntax:
- ATR.013 trunc for IP/ARP frm source_address
nt network
- Long Syntax:
- ATR.013 Truncated for IP/ARP packet from source_address
network network
- Description:
- This message is generated when a packet is received which
is not long enough to contain the the amount of IP or ARP
data that is claimed in the extra header for IP and ARP packets.
- Cause:
- Programming error at remote node, or packet corruption on ring.
- Level:
- UI-ERROR
- Short Syntax:
- ATR.014 Slftst fld on step_name
, nt network
- Long Syntax:
- ATR.014 Self-test failed on step step_name
, network network
- Description:
- This message occurs when the self-test of the interface fails.
The network will go down, if it had not been down previously.
- Cause:
- If step_name is "NPGA initialization," then Apollo Token Ring
interface is probably defective, or seriously misconfigured.
- Action:
- Replace interface.
- Cause:
- If step_name is "Analog loopback test," then problem is probably
internal to the interface. This means that an analog loopback
test up to the bypass relay on the interface failed.
- Action:
- Replace interface.
- Cause:
- If step_name is "Network connection," then problem is probably
in the connection to the network, or the network itself is dead.
- Action:
- Diagnose network problem. Check for disconnected cables, etc.
- Cause:
- If step_name is "Software bug," there is a bug in the router
software. The self-test should never be in this state.
- Action:
- Contact customer service.