Release Notes For updates to release notes, visit our Web site www.nxnetworks.com
OpenROUTE 5.2 Release Notes
OpenROUTE 5.1 Release Notes
OpenROUTE 5.0 Release Notes
IP Protocols and Features
IP
DHCP
HTTP
IGMP
Network Address Translation (NAT)
OSPF
RIP and Triggered RIP
Static IP Filters
Dynamic IP Filters
SNMP
IPSec New support for road warriors in 5.2!
Using IPSec
Setting Up IPSec See actual IPSec configuration examples
Other LAN and Routing Protocols and Features
AppleTalk
ARP
BGP-4
DVMRP
IPX including NLSP & IPX Filters
MIBs
LAN Interfaces
Ethernet
Token Ring
Voice Features Support for Analog Voice added in 5.1!
Getting Started With Voice
Upgrading the Analog Voice Software to 5.2
Installing the NetrixView 2000 Software
Using the Analog Voice Module
Using the Voice Commands
WAN Protocols and Features
Bandwidth Reservation and Priority Queuing
Circuit Configuration
DDS CSU/DSU
Fractional T1 and E1
Frame Relay
ISDN
Point-to-Point Protocol (PPP)
SDSL
Serial Devices
Serial Interface Dialer (DIAL)
WAN Reroute
X.25
X.25 Transport Protocol (XTP)
Bridging
About Bridging
Bridging Commands
IP Tunneling
LAN Network Manager (LNM)
MAC Filtering
NetBIOS
NetBIOS Name and Byte Filters
TCP/IP Host Services
Protocol Threading Through a Bridged Network
Interoperating With the IBM 6611 Bridge
Secure Documentation and Software
GTSecure Dynamic IP Filters
GTSecure RADIUS Authentication
GTSecure Secure Login Installation & Configuration
RADIUS Server Software
Systems Network Architecture (SNA)
Using DLSw
Configuring and Monitoring DLSw
Configuring and Monitoring SDLC
Using Boundary Access Node (BAN)
Using SDLC Relay
Configuring and Monitoring SDLC Relay
Interoperating With the IBM 6611 Router
Miscellaneous
Using Protocol Stacks
Using the Command Line Interface
Learning the User Interface & OPCON Commands
Configuring Booting and Dumping
Configuring the System
Monitoring the System
Using the Event Logging System In 5.2, you can send ELS messages to a Syslog host
Configuring Boot Options
Event Logging Systems (ELS) Messages
Messages
|